Used Hilgeland / Zom Thread Rolling Machine - Flat Die for sale (72,587)

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Gsdeuz If Njpfx Aguobp Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Gedpfxeh A S Hte Agujbp Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: new, Thread rolling machine Gbodpoyz Th Rofx Aguop

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Gbedpfswm Rtzex Agusp Machinetype: thread rolling machine for nails Make: ENKOTEC Type: TA01 Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Location: Germany

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 063/09, thread length: 50 mm, workpiece diameter (max.): 6 mm, SMART MACHINERY NG S-DD Thread Rolling Machine Fully operational, currently in production. Year: 2009 Incoterm: EXW Calolziocorte (LC) The machine automatically sets up for stroke change. The NG S-DD thread rolling machine is equipped for changing the ram stroke depending on the length of the comb used. Minimum pass-through diameter: 1 mm. Maximum pass-through diameter: 6 mm. Maximum threaded length: 50 mm. Maximum rivet length: 80 mm. Gjdpeyycr Nsfx Aguebp Maximum output: 700 pcs/min. Main motor power: 13.9 kW Installed electric power: 16 kW

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system EW Menn including vibratory feeder, Skako, and slide conveyor Gjdpfxewkqvqo Aguobp

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Gbedpfx Agevyyyxeuep Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: NT2012, ESCOFIER MACHINE, EXCELLENT CONDITION, VERY LITTLE USED. 12-TON MACHINE. POSSIBILITY TO SEE IT OPERATING IN OUR WORKSHOP. Gedpsycq Ebefx Aguobp

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm Gbsdpfxeymlx Ds Agujp

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Godpjv Rb Apofx Agujbp Download PDF file for photographs

Condition: used, Year of construction: 1996, Thread rolling machine Ingramatic RP21 RV With sems unit Gbjdsylw N Sspfx Aguep Flat dies Year: 1996 Diameter : max 8 mm Shaft length under head: 80 mm Max. thread length: 58 mm

Condition: used, Year of construction: 1994, Thread Rolling Machine EWMenn GW63 Gedpfx Ageylw E Tousbp Flat dies Year: 1994 Diameter range: max 8 mm Shaft length under head: 80 mm Max. thread length: 58 mm

Condition: used, Thead Roller TLM RP8 TLM TORTONA Year: 1995 Diameter range: 3-8 mm Shaft length under head: 90 mm Max. thread length: 52 mm Dies size:130/115x54 Gedpfox Aqprjx Aguobp

Condition: new, THREAD ROLLING ROLLERS Gbedozdv Trjpfx Aguep

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Gjdpjv Nzpgsfx Aguebp Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Ingramatic RP1 Max diameter: M6 Max. thread length: 42mm Max. shank length: 75mm Gedpohrdnkofx Aguobp Year: 80's

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Gedpfozlahisx Aguobp Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Gjdjxdmgvepfx Aguebp Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Gedpfx Agjy Ugtaouobp Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, workpiece weight (max.): 2,000 kg, thread length: 3,000 mm, Ø400, LENGTH 3000 mm, MODULE 8-10, HELICAL AND STRAIGHT GEAR CUTTING. Gsdpfx Agszkrgbsusbp

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Gbjdpfx Agjziytmeuop Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Gbsdpfx Agsy Nkwrsusp Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12 Gbsdpfx Aeu Tliysgujp

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Gedsu N Skfepfx Agusbp Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Gsdpfjy Nkpuox Agusbp Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of tool changer positions: 28