Used Homag 4-Axis Board Rev.07 for sale (67,910)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Ksdpfx Aasw Hpzwohsdp Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. Kodpfxozhwvpo Aahodp You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: ready for operation (used), Fanuc A16B-1211-0291/03A Axis Board, used, shows normal signs of wear, 100% functional. Kjdpfx Aasi D U Apshjdp

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks Kdodozhuyfjpfx Aahop 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Condition: used, Year of construction: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 Kdodpfx Aju Idl Ssahop tool changer magazine: chain magazine: 12 places Stück traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. *

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. * Kodpeu Ndbpjfx Aahsdp

Condition: like new (used), Mazak VCN-530C 4 Axis VMC Year 2020, Smooth Control, Kdodpszil A Hefx Aahop Kitagawa 4th Axis with 300mm face plate 1300mm x 550mm table, 1050mm x 510mm x 510mm travels, 12,000rpm spindle, Renishaw probing,

Condition: excellent (used), Vertical Machine Center Chiron FZ12W Magnum Sinumerik 810 M Max RPM 8.000 rpm./min, X = 550 mm Y = 300 mm Z = 425 mm 2 x 4th axis Peiseler RT 160 hydraulik brake Nose tool SK 40, Cooling throw spindel IK ATC 20 pcs Machine is still running the production, and can be inspected any time Kjdpfxslng D Ae Aahsdp Machine in very good technical condition. I am giving 3 months startup guarranty

Condition: used, 4-axis industrial robot, handling robot, SCARA robot, handling robot, loading robot, placer STÄUBLI type TS80 + CS8C bmn Year of manufacture 10/2011 Serial no. F11/5JN5A1/A Year 2011 Number of axes 4 Handling weight (rated load) 2 kg Handling weight (maximum load) 8 kg Arm reach 800 mm Repeat accuracy (X+Y) 0.01 mm Repeat accuracy (Z) 0.004 mm Repeat accuracy (R) 0.002° Working range axis 1 +-280° Working range axis 2 +-310° Stroke axis 3 (Z-axis) 200 mm Rotation axis 4 (R-axis) +-500° Nominal speed / maximum speed: Axis 1 350 / 490 °/s Axis 2 500 / 620 °/s Axis 3 1600 / 2220 mm/s Axis 4 1200 / 1929 °/s Axes 1 + 2 8.11 / 10.84 m/s Robot configuration floor mounting Controller STÄUBLI CS8C bmn Serial no. F11/5JN5A1/C Rated voltage 1 x 230 VAC Rated frequency 50 - 60 Hz Connected load 1700 VA Dimensions of controller (W x H x D) 450 x 310 x 450 mm - Controller adjacent with removable "Teach in" operation - Material gripper, workpiece gripper HELLA / MADER Total weight 190 kg Ksdpjvmhphsfx Aahedp Transport footprint L x W x H 900 x 700 x 1500 mm Very good condition

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 600 mm z-travel: 650 mm control: Siemens 810D shopMill distance spindle /table: min 130mm / max. 780 mm number of spindle speeds: 10000 U/min. spindle taper:: SK 40 tool changer with: 24 Plätze Kdjdpfx Asyfgiuoahjp table-size: 1160 x600 mm interface: ja Weight approx.: 5,45 t 4th axis *

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Kdjdpev N Di Aefx Aahsp Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences • Security carpets • CE rules • Year 2007 ROUTER UNIT 8,5 kW / 11,5 HP Kjdpfx Aszg H Sdsahedp 0 to 24.000 rpm Automatic Tool Change System HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm 3.500 to 7.500 rpm

Condition: used, Year of construction: 2019, machine/vehicle number: 0191, A 4-axis CNC profile machining centre Emerald F260, year of manufacture 2019, sourced from a professional production environment. The machine is perfectly maintained, damage-free, and fully operational. Axes: X / Y / Z / A (4-axis interpolation) Control: PA8000 (Germany) Spindle: HSD (Italy) – 9 kW, up to 24,000 rpm A-axis rotation: +90° to -90° Working area: Up to 7000 mm length (depending on clamp configuration) Tool magazine: ISO30 – 9 positions Applications: Milling, Drilling, Tapping, Grooving, Angular machining Materials: Aluminium profiles, light alloys, UPVC Kjdpjx R U Eijfx Aahedp

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Kdsdpfoxpqy Djx Aahop Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Kdsdszbb Rropfx Aahop

Condition: used, Year of construction: 2009, Doosan Mynx 750/50 4 Axis Vertical Machining Centre with Fanuc Series 21i-MB CNC Control, Kitagawa MR320RAE04 4th Axis Unit 310mm 3 Jaw Chuck, Table Size 1600mm x 750mm, 40 Tool ATC, BT50 Spindle Taper, Filtermist FX7002 Oil Mist Extractor, Kaukan Chiller Unit, Profluid MCF 20 Coolant Pressure Filter Unit, Machine Weight 13500kg. S/No. MYNX 7500373 (2009) Includes Work Bench, Vice and Various BT50 Spindle Tool Holders. Country of Origin: Korea Kjdpjzdtlrefx Aahsdp Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchase

Year of construction: 2002, condition: ready for operation (used), Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 5kVA, equipment: rotary spindle, controlled C-axis, CNC conversational control system, Handy Genius remote hand-held control unit, tool holder: Erowa ITS 007523 quick-clamping chuck, 16-position electrode changer, extraction unit, C-module Z+K, automatic CO₂ fire extinguishing system, paper cartridge filter, electronically controlled heat exchanger, high-pressure flushing system (defective), rotary head up to 750rpm and tube guide. An on-site inspection is possible. Kedpfx Aaezadlpohjdp

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Machine can be inspected any time under power Kdsdpfsrgqu Hox Aahjp

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN Kedpfx Aastt Da Ishjdp MIST EXTRACTOR VERY CLEAN

Condition: ready for operation (used), Year of construction: 2008, Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement. Kedpfx Ajy T N H Hjahjdp

Condition: ready for operation (used), Year of construction: 2005, Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement. Kdsdpfoy T N Hysx Aahsp

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Kedjy R Rn Hopfx Aahedp Chip conveyor Coolant unit

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing Ksdpfx Aaoiv Imnohodp • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. • Daewoo MYNX 540, Baujahr 2001 • die Spindel wurde im Frühling 2025 revidiert, neue Lager!! • die 4.Achse gehört mit dazu • ACHTUNG, das liegende 3-Backenfutter NICHT Arbeitsbereich X-Achse mm 1020 Y-Achse mm 510 Z-Achse mm 625 Aufspanntisch Tischgrösse mm 1200 x 500 4 T-Nuten mm 18H8 T-Nuten Abstand mm 125 Abstand Tisch-Spindelnase mm 150 - 775 Abstand Spindelmitte-Ständer mm 520 Tischbelastung kg 800 Spindelstock Antriebsleistung kW 11/15 Drehzahlbereich, stufenlos U/min 80 - 8000 Kdjdpfxjyfg Taj Aahsp Bereich konstanter Leistung U/min 750 - 8000 Drehmoment, max. Nm 190 Spindelkonus DIN 69871A ISO 40, SK40 Anzugsbolzen DIN 69872 STANDARDZUBEHOER • - FANUC CNC-Bahnsteuerung Modell 21 i-MA mit 9,5" LCD Monochrom Bildschirm, • Teileprogrammspeicher 32 kB/80 m • - RIGID TAPPING - Gewindebohren ohne Ausgleichsfutter • - 24-fach Tellermagazin • - Werkzeugaufnahme im Spindelkonus ISO 40, DIN 69871A/DIN 69872, SK40 • - FANUC AC-Hauptantrieb mit 11/15 kW Motor • - Drehzahlbereich 80-8000 U/min, stufenlos • - Kühlmittelversorgung aus dem 300 Litertank, Pumpe 1,5 bar SONDERZUBEHOER • - Spindelölkühler • - Kühlmittelzufuhr durch die Spindel (Form A) DIN 69871 • mit 10 bar Pumpe und Patronenfilter • - Kühlmittelpumpe 6 bar • - Vorbereitung für 4. Achse • - KITAGAWA CNC-Rundtisch Typ RS 250 RAHO • mit Motor Fanuc und 4. Achse in Maschine

Condition: used, AWEA BM-1400 is a 4-axis machining center designed for precision, high accuracy and reliability. Table 1500×800 mm; travels X1400 mm, Y800 mm, Z700 mm. Spindle nose ISO 40, 0–12000 t/min (stepless), supply 50Hz 3x400V, total power 40 kVA; weight ≈12000 kg; size L4800×W2850×H3100 mm. Accessories: set of toolholders, high pressure coolant 40 bar, chip conveyor, dividing attachment 4th axis, electronic handwheel, RS‑232 interface, status light. Achieves tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Kdedpfxsyxn E Eo Aahep