Used Kami Fkm 349 V for sale (33,454)

Condition: new, bore capacity in steel (diameter) 30 mm throat 260 mm bore stroke 135 mm spindle taper MT 3 MK table: 420 x 350 mm column diameter 135 mm turning speeds 125 - 3030 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,1 kW weight of the machine ca. 380 kg. Ppodpfofv H H Aox Antst range L-W-H 0,9 x 0,55 x 2,2 mm High-quality drill press with a high speed range for the industrial use.

Condition: new, turning diameter over bed 410 mm Pedem Rlb Nepfx Antspt turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: ready for operation (used), KEB 12.56.200-A349 Combivert frequency inverter SN:95460178/156094, used, in good condition, 100% fully functional, delivery as shown in photos. Pjdpfx Anox Etz Setept

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW Ppsdpfxjhq Rp Hs Antst 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Ppedpoycwtfefx Antst

Condition: good (used), Year of construction: 2018, machine/vehicle number: ZA-12080, Offer 25498 Technical Specifications: - Drilling capacity: 50 mm - Tapping unit up to: M 40 mm - Tool holder: MT 5 - Spindle stroke: 280 mm - Spindle speeds: 38 – 2,000 rpm - 6 feed rates: 0.08 – 0.83 mm/rev Podpfxjyf A A Ro Antopt - Drive: 400 V / 5.5 kW - Throat depth min. / max.: 350 / 1,400 mm - Distance spindle to machined base plates min. / max.: 350 / 1,250 mm - Machined base plate with T-slots: W 1,650 x D 930 mm - Electric central clamping - Coolant system + lighting - Cube table - Required space approx.: W 2,300 x H 2,400 x D 1,050 mm - Weight approx.: 3,500 kg

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications Podpfx Asdzzw Aontept height of Center 330 mm Length between center 3000 mm Spindle bore 82 mm Swing over bed 660 mm Swing in the gap 840 mm Swing over slider 420 Speed range 9-1600 rpm (24 steps) Spindle nose ISO 702 / II No. 8 Camlock Range of longitudinal feeds 0,028 - 6,43 mm / rev (93 steps) Range of feed rates 0,012 - 2,73 mm / rev (93 steps) Metric threads 0.5 - 224 mm (48 steps) Inch thread 72 - 1/8 speed / inch (49 steps) Module thread 0.5 - 112 mm (42 steps) Diametral thread 56 - 1/4 DP Quill diameter 75 mm Quill travel 150 mm Quill holder Morse cone 5 Motor power 7,5 kW Weight 3,300.00 kg Dimensions 4635 x 1050 x 1450 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Psdpfx Aned I A Auotspt Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Pjdpfx Asd I A Dhjntopt Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Ppedod I A Ahjpfx Antst Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Psdpfxed I Az Se Antopt Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quill Travel 150 mm Quill sleeve Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Distance between Cneter 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Pjdpfxed I A Dae Antjpt Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: used, first registration: 10/2011, Year of construction: 2011, M&V 902 Container Chassis High Cube Extendable ● ABS Podpfx Anox Nc D Djtspt ● Air suspension ● Lift axle ● Raise/lower system ● 3 x SAF axles with disc brakes ● Tyres: 385/55 R 22.5 ● Container mounts: 20 ft / 2 x 20 ft / 1 x 30 ft / 1 x 40 ft ● Gross weight: 39,000 kg ● Unladen weight: 6,300 kg ● Payload: 32,700 kg !! Extendable at rear and in the middle !! - German semi-trailer - TÜV / MOT: New on request and at extra cost! Subject to errors and prior sale! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: good (used), - Mitre cut length (mm): 100 - Adhesive medium: hot melt adhesive Ppodpfem Sfnex Antot - Automatic composition: of frame parts

Condition: used, Year of construction: 2000, To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm Pedpfod H Irfsx Antopt 2 heating Rails

Condition: good (used), For fully automatic assembly of frame parts. Outer frame dimensions: min. 120 x 120 mm max. 700 x 2.500 mm Ppodpfodhdg Isx Antst

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm Psdpfx Anexx T Amotspt V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: new, bore capacity in steel (diameter) 25 mm throat 240 mm bore stroke 110 mm Ppjdsfhk Ubepfx Antjt turning speeds 125 - 2850 U/min 310 x 320 mm distance drilling head - clamping area max. 650 mm total power requirement 0,75 / 400 kW / Volt weight of the machine ca. 0,175 t dimensions 0,95x0,8x1,75 inkl. Tisch m

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 155 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 125 - 3030 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,2 kW weight of the machine ca. 540 kg. range L-W-H 0,8 x 0,55 x 2,2 mm • machine base for clamping high workpieces • Digital Depth Gauge Pjdpfxsurznqs Antopt • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Condition: new, bore capacity in steel (diameter) 40 mm Podpef Nb E Rofx Antspt throat 370 mm bore stroke 200 mm spindle taper MT 4 MK table: 580 x 460 mm column diameter 160 mm turning speeds 75 - 2020 U/min feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement 1,5 kW weight of the machine ca. 700 kg. range L-W-H 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 27 mm spindle clearance Pedpfx Anef Nb Hkjtspt - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 115 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 350 mm 130 mm table surface area 590 x 190 mm connected load frequency 400 V diameter of hob max. 80 mm feed 0,1 - 0,18 - 0,26 mm/U Pedpef Nb E Hofx Antept total power requirement 1,1 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Ppjdpfef Nb Hgjx Antst Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.

Condition: used, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 160 mm spindle turning speed range 65 - 460 / 460 - 3250 U/min no. of turning speeds stufenlos Stufen feeds 0,1 - 0,2 - 0,3 mm/U spindle taper MK 4 table surface area 500 x 420 mm base plate 650 x 450 mm Distance spindle/table max. 500 mm column diameter 120 mm distance spindle/base plate 1100 mm Total height 2200 mm voltage 400 V / 50 Hz drive motor 1,5 kW coolant pump drive 0,2 kW total power requirement 1,7 kW weight of the machine ca. 0,550 t dimensions of the machine ca. 0,6 x 0,8 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, Ppodpfswyd Sksx Antot work light, table can be rotated and tilted,

Condition: not inspected (used), Year of construction: 1958, functionality: unexamined, machine/vehicle number: 202, wheel diameter: 885 mm, production capacity: 4,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Maximum bolt diameter: 7.7 mm Maximum thread: M8 Pjdpfx Aoy D Tfhsntspt Maximum shank length: 90 mm Minimum shank length: 20 mm Output: approx. 35/53/70 pcs/min Flywheel diameter: 885 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 1,500 mm Machine weight: 2,500 kg External reference: 42