Used Knorr Abs106-4Rfa for sale (60)

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color Ljdpfxowx Dcte Aqverl * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, maximum load weight: 16,300 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800mm, length of loading area 8,350mm, Knorr brake EBS 4s/2k (ASR), folding rear support legs 25,000kg, pneumatic valve for adjusting the N.4 wheel blockers, Electric winch with remote control, 3x2 lashing rings in the platform outer frame (8to), Aluminium frame L: 2,300mm - W: 500mm, hot-dip galvanized, Tool box, Loading platform rollers, Extendable bumper, Ramp bracket Lrjdeih E Hyjpfx Aqvol

Condition: new, maximum load weight: 32,600 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting timber and long materials. * Chassis length approx. 13510 mm (head frame-head frame) * Chassis width approx. 2540 mm (outer frame-outer frame) Lrsdpfx Aqen Hrrievel * Sturdy steel bulkhead approx. 2,500 mm high * 16x OptiPa A7 one-piece aluminum stanchions * Steel floor 4/6 mm tear plate cover * Technically permissible total weight 43,000 kg * Unloaded ride height approx. 1400 mm with saddle height 1200 mm * Max. fifth wheel load approx. 16000 kg * 2" kingpin in accordance with SAE standard, interchangeable from below * 16x Optipa quick-release fastener system embedded in the outer frame and 8x as storage for stanchions distributed centrally over the entire length * 3x 9t axle with large disc brake and air suspension unit for 9t load capacity each Total lift approx. 180 mm * Lifting and lowering device with rotary slide valve * Axle lift first axle, automatic function, with starting aid * Smartboard/TIM/Infocenter * EBS brake system make Knorr or Wabco of our choice with Roll Stability program * Brand tires 385/65 R 22.5 * LED work lights * LED lighting system * 2x toolbox * CDP with zinc phosphating plus powder, maximum corrosion protection (only if powder paint is available) For further information please do not hesitate to contact us

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings Lodsxn Ebmjpfx Aqvorl * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) Lsdpfx Aexn Eckoqvjrl * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: used, maximum load weight: 29,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2023, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Wielton Curtainsider Type "QUICK SLIDE" with Speed Curtain. The Curtainsider trailer with the Quick Slide rapid curtain system is an innovative solution designed to minimize loading and unloading times as much as possible. By replacing horizontal boards and standard stanchions with a specially developed curtain, the handling of the trailer has been significantly improved. Quick Slide is the ideal solution for customers who perform many handling operations daily and value speed and convenience. Wielton Quick Slide Curtain Master Lrsdpfx Aqjx Uvk Ievel Includes load securing system for partial loads (2 movable partition walls) Unladen weight approx. 6,500 kg Demonstration vehicle – immediately available First registration 20.07.2023 Saddle height 1,120 mm Equipment: SAF disc brake axles First axle as lift axle Tyres 385/65 R22.5 on steel rims Tyre brand: BRIDGESTONE Brake system: KNORR Lighting system: ASPÖCK Rear lights: EUROPOINT III Landing legs: SAF Side underrun protection made from lightweight composite, foldable Lamp carrier made from lightweight composite Toolbox Rubber rear bumpers Extendable access ladder Folding ladder under platform, right Floor: phenolic plywood panels EDSCHA sliding roof Chassis: RAL 7021 black grey Aluminium body unfinished Side curtain: RAL 9005 deep black Roof curtain: white Used vehicle with age-typical and customary signs of wear. Interim sale and errors for this offer are expressly reserved. Some images show optional equipment. Only the agreements in the order confirmation or in the purchase contract are binding. You will receive the exact equipment specification and prices from our sales staff. Please contact us.

Condition: used, empty load weight: 7,920 kg, maximum load weight: 27,080 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,725 mm, loading space volume: 93 m³, total length: 13,600 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 7,900 mm, color: black, gearing type: mechanical, Equipment: ABS, Lease rental with no down payment, 72-month term with final balloon payment. Technical Data Weights: - Fifth wheel load: approx. 11,000 kg Lrjdpfox Nbgksx Aqvsl - Permissible axle load: approx. 24,000 kg - Permissible total weight: approx. 35,000 kg - Unladen weight according to DIN 70020: approx. 7,920 kg - Payload according to DIN 70020: approx. 27,080 kg Dimensions: - Exterior dimensions (body): approx. 13,600 x 2,550 mm - Platform size: approx. 13,515 x 2,480 mm - Rear loading floor height (unladen): approx. 1,142 mm - Clear tarpaulin height at rear: approx. 2,725 mm - Clear tarpaulin height at front: approx. 2,675 mm - Overall front height (unladen): approx. 4,033 mm - Overall rear height (unladen): approx. 4,017 mm - Usable volume: approx. 93.1 m³ - Tractor fifth wheel height: approx. 1,150 mm Chassis: - Integrated chassis frame made of high-quality painted fine-grain steel - Axles: 3 x 9 t axles with disc brakes Z 430 mm, for rims with 120 mm inset; centrally positioned axles - Lifting axle: automatic lifting axle (3rd axle, rear), control via EBS with brake pedal function - 1st axle (front) with traction aid - Disc wheels: 6 x 11.75 x 22.5, on ALCOA alloy rims - Tyres: 6 x 385/55 R 22.5, Continental HTR2 - Suspension: air suspension unit incl. lift and lowering device - Braking system: electronic brake system (EBS) from Knorr, compliant with DIN 7638, RSS activated, with parking brake via spring actuators, brake connections at the front bulkhead - Kingpin: 2'' Jost, compliant with DIN and ISO 1726, exchangeable from below - Landing gear: 2 mechanical, 24 t telescopic landing legs with 2 speeds and equalizing pads Floor: - Aluminum frame resting on the longitudinal members, fitted with 28 welded, closely spaced aluminum I-crossmembers (100 x 100 mm). All I-beams are predrilled at regular intervals on a special drilling jig before welding. Our patented special plastic substructure for guiding the moving floor profiles is mounted with U-brackets. The moving floor profiles are then pulled in via cable system. With this substructure system, we achieve an absolutely straight ...

Condition: used, maximum load weight: 35,840 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 02/2026, Equipment: ABS, Excerpt from the equipment. Complete specification available on request. Chassis Ledpfxsw Ak A Uj Aqvorl Configuration for the transport of containers: 45', 40' HC, 30', 20' center, 20' rear, 2x20', 40' ISO. Frame adjustment for a 40' ISO container. Rear pneumatic extension with additional mechanical locking pin. Container Master 45' R2. Extendable bumper. Steel underrun protection. Axles and Suspension SAF disc brake axles, 3 x 9,000 kg, 22.5" INTRADISC KNORR clamps. Brake disc diameter: 430 mm. Rigid axles. Approx. 1,090 mm fifth wheel height unladen. First axle lift axle. Landing Gear JOST two-speed landing legs. Tyres/Rims BRIDGESTONE 385-55-22.5 DURAVIS R002 3PMSF (B-B-70), 6 pieces. Rolling resistance: B, wet grip: B, rolling noise: 70dB. Without spare tire. 6 rims, 6x steel rim 22.5-11.75 ET-120. Protective caps for wheel nuts. No spare wheel rim. Brake System/Pneumatics Steel air tanks. Brake system as per customer's choice, manufacturer-equipped, with basic modulator featuring RSS/RSP. Electrics Socket: 1x 15-pin and 2x 7-pin with EBS connection, without connecting cables to the tractor unit (SZM). Lighting Partial LED Aspöck-EUROPOINT III. LED license plate lighting, LED outline marker lamps, LED side marker lamps. Other Chassis Equipment Full spray suppression mudguards behind the third axle. Full PVC mudguards. Without spare wheel basket and spare wheel winch. Key for container locking. Frame adaptation for ISO 40' containers (with flat floor, without tunnel). 2 adapters and 2 spacer supports. No toolbox. Chassis Paint KTL coating. Chassis painted RAL 7021 (black grey).

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2025, Equipment: ABS, Wielton Bulk Master with gooseneck Aluminum square tipper body with combination tailgate, loading volume 51m³ Doors symmetrically split, two grain chutes Floor plate 7 mm ENDUR aluminum HB 114 Unladen weight 6,480 kg Fifth wheel height 1,200 mm New vehicle – available immediately - SAF disc brake axles Ø430 - First axle as lift axle - Automatic tipping lowering function - SAF landing gears - Foldable steel underrun protection - Aluminum air tanks - Tyres: 6x 385/65 R22.5 Goodyear Kmax - Steel rims - Brake system KNORR 2S/2M - Inclination warning sensor - ASPÖCK lighting system with EcoLED II LED taillights - 2x LED reversing lights - 2x LED working lights mounted on the sides - Low-pressure cylinder HYVA Alpha 190 bar Ledpfx Aqexv Nwnsvsrl - Roll tarp 890 g/m² with quick-release fastener, center tubes integrated - Working platform mounted on chassis, access on driver’s side - Tension chain between side walls in the body - Water tank with soap dispenser - 145-liter PVC toolbox - Aluminum ladder (2,840 mm) - Extendable steel access ladder mounted at the rear - Dust bag - Frame painted RAL 7021 black grey, body painted RAL 9006 white aluminum - Roll tarp light grey Interim sale and errors for this offer are expressly reserved. Some images show optional equipment. The terms of the order confirmation or purchase contract are solely decisive. Exact equipment details and prices are available from our sales staff. Please contact us.

Condition: used, maximum load weight: 33,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, total width: 2,550 mm, total height: 1,300 mm, Year of construction: 2022, Equipment: ABS, Wielton Multi Container Chassis for transporting 45 / 40 / 40 HC / 20 / 2x 20 ft containers. Rear extension pneumatic, front mechanical. Unladen weight: 5,000 kg. Fifth wheel height: 1,090 mm. First registration: available immediately. Equipment: - SAF disc axles 22.5 Intradisc - SAF Tire Pilot - tyre inflation system - Lift axle (1st axle) - Wabco braking system with Smartboard - Brake pad wear indicator - IVTM tyre pressure sensors - Tyres: 385/55 R22.5 Bridgestone Duravis - Steel rims - Landing gears SAF Hercules - Steel air tanks - HELLA lighting system, tail lights Full-LED Lrsdpfxsw N Anus Aqvjl - KNORR brake system - Toolbox - ADR sign Subject to prior sale and errors excepted for this offer. Some images show optional equipment. Only the agreements in the order confirmation or the purchase contract are binding. You will receive the exact scope of equipment and pricing from our sales staff. Please contact us.