Used Kraussmaffei Km 50/Km 125 for sale (44,252)

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Platen movement force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is an excellent candidate for ESS retrofitting (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m Lrsdpfx Akoyv E Nvomju

Condition: good (used), Year of construction: 1999, clamping force: 2,000 kN, Manufacturer: KraussMaffei Kunststofftechnik München Model: KM 200-700 C2 Lsdpfoytiqwex Akmsru Machine No.: 174406 International size designation: 700 C2 / 200 Year of manufacture: 1999 Clamping force: 2000 kN Clamping force: 200 t Injection unit size: 700 Machine weight: 8,800 kg Location: Freiburg

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Lrodew Hthzjpfx Akmsu

Condition: excellent (used), Year of construction: 2021, operating hours: 5,646 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, plate length: 670 mm, plate height: 670 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KraussMaffei KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control System: MC6 Year of Manufacture: 2021 Operating Hours: 5646 h Technical Data - Clamping Unit Clamping Force: 800 kN Tie Bar Spacing h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Technical Data - Injection Unit Screw Diameter: 40 mm Injection Volume: 201 cc Injection Pressure: 1860 bar Screw Length: 20 l/d Free Injection Flow Rate: 295 g/s Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.3 m x 1.6 m x 2 m Total Weight: 3900 kg Equipment 3 freely programmable inputs and outputs Screen text: German Screen text: Polish CEE socket 16A CEE socket 32A Increased ejector force Ledpfxsz Ayi Us Akmsru Hydraulic core pull 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant BDE interface Interface for color dosing unit USB interface Schuko socket 10A

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS Lrjdpfxotuncco Akmeu closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production *

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 KM No. 6268540 KM No. 6441936 Ledpjzl Dg Nofx Akmeru R901196471

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 250-1400 CX Stock No.: 503243 Manufacturer: KRAUSS MAFFEI Type: KM 250-1400 CX Control System: MC5 Year of Manufacture: 2010 Operating Hours: 54872 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing (horizontal x vertical): 630 x 630 mm Platen Size (horizontal x vertical): 995 x 1050 mm Minimum Mold Thickness: 330 mm Maximum Mold Thickness: 1150 mm Opening Stroke: 820 mm Ejector Stroke: 200 mm Ejector Force: 58 kN Centering of Moving Platen Diameter: 160 mm Centering of Fixed Platen Diameter: 160 mm Tool Weight: 3430 kg Technical Data – Injection Unit Screw Diameter: 55 mm Injection Volume: 570 ccm Injection Pressure: 2387 bar Screw Length: 22 l/d Screw Speed: 260 rpm Plasticizing Rate: 49 g/s PS Number of Heating Zones: 6 Lrodpfsz A Uhisx Akmju Dimensions & Weight Machine Dimensions (LxWxH): 6.5m x 2.2m x 2.3m Total Weight: 15000 kg Equipment 2x Temperature Control Units for Hot Runner System Screen Text in German CEE Socket 16A Pressure Accumulator for Increased Injection Performance + Ejector or Core Pull parallel Hydraulic Core Pull 1x Air Valve 4x Machine with Material Hopper Machine with Water Battery Machine without Handling System Leveling Elements EUROMAP 12 Interface EUROMAP 67 Handling Interface USB Interface Schuko Socket 10A Low-Wear Plasticizing Unit

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Lsdpfx Aoyf Uy Uekmeru Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 2008, KRAUSSMAFFEI injection molding machine KM 1000-4300 MX SIDE INJECTION UNIT KM 380 BOLT-ON LRX ROBOT General Information Parameter Data Manufacturer KraussMaffei Model KM 1000-4300 MX Year of manufacture 2008 Serial number 61012454 Clamping force 11,000 kN (1100 t) Machine weight 54,000 kg Design Two-platen, hydraulic Number of injection units 2 Additional unit KM 380 BO L (Bolt-On) Robot KraussMaffei LRX Note: The KM 1000 designation indicates a 1000 t class, while the stated clamping force of 11,000 kN corresponds to 1100 t. 2. Clamping Unit Parameter Value Clamping force 11,000 kN Dimensions of mounting plates (H x V) 2210 × 1910 mm Column spacing (H x V) 1550 × 1250 mm Minimum mold height 600 mm Maximum mold height 1200 mm Opening stroke 2000 mm Ejector stroke 300 mm FP / MP centering rings 250 / 250 mm Maximum mold weight – fixed platen 25,000 kg Maximum mold weight – movable platen 25,000 kg Maximum total mold weight 50,000 kg Main injection unit – unit no. 1 Parameter Value Screw diameter 80 mm L/D ratio 23 Injection volume 1810 cm³ Volumetric injection rate 503 cm³/s Maximum hydraulic pressure 190 bar Maximum specific injection pressure 2328 bar Screw stroke 354 mm Specified maximum screw speed 955.8 – to be confirmed by the unit Additional side injection unit – unit no. 2 KRAUSSMAFFEI KM 380 BOLT-ON Parameter Value Manufacturer KraussMaffei Type KM 380 BO L Year of manufacture 2008 Serial number 61011975 Unit weight 2500 kg Type Additional side injection unit Screw diameter 40 mm L/D ratio 20 Injection volume 204 cm³ Volumetric injection rate 161 cm³/s Maximum specific injection pressure 1860 bar Screw stroke 160 mm Specified maximum screw speed 391 – to be confirmed by the unit The additional side injection unit enables the implementation of multi-component processes, including 2K technology, provided that a suitable mold and control configuration are used. Robot and automation The machine is equipped with a KraussMaffei LRX linear robot, designed to automate the process of removing parts from the injection mold. The robot model, its year of manufacture, serial number, payload, and ranges of motion for the X, Y, and Z axes need to be confirmed based on the nameplate or documentation. Hydraulic equipment and control Lodpj Adpc Djfx Akmjru Equipment Quantity / parameters Hydraulic mold cores – fixed platen (FP) 2 Hydraulic mold cores – movable platen (MP) 2 Total number of hydraulic core circuits 4 Sequential injection control 16 zones Hot runner control 48 zones Main injection unit Ø 80 mm Side injection unit Ø 40 mm Robot KraussMaffei LRX Technological configuration The machine has two independent injection units, which allows it to be used in multi-component production. The configuration includes: • Main injection unit with an 80 mm screw. • Additional Bolt-On side unit with a 40 mm screw. • Four hydraulic core control circuits. • Sequential control of 16 zones. • Control of the mold hot runners – 48 zones. • KraussMaffei LRX linear robot • Transport data Element Weight KM 1000-4300 MX injection molding machine 54,000 kg KM 380 BO L side unit 2500 kg Total weight 56,500 kg

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Lodjzvm T Tepfx Akmjru Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Lredpfx Akex Hz I Nomou Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: as good as new (ex-display), Year of construction: 2025, KraussMaffei KM 651-6100 GX hydraulic injection molding machine LRX 250 robot Year of manufacture: 2025 TECHNICAL DATA Manufacturer: KraussMaffei Year of manufacture: 2025 Clamping force: 6500 kN (650 tons) Machine type: hydraulic injection molding machine Robot: KraussMaffei LRX 250 CLAMPING UNIT Clamping force: 6500 kN (650 t) Mold opening force: 455 kN Platen dimensions: 1660 × 1530 mm Tie bar spacing: 1200 × 1020 mm Mold opening stroke: 1450 mm Minimum mold height: 450 mm Maximum mold height: 1000 mm Maximum platen clearance: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140/70 kN INJECTION UNIT Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Injection shot weight: 2391 g (HDPE) Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed: 147 rpm Plasticization rate: 102 g/s Nozzle closing force: 166 kN ELECTRICAL AND HYDRAULIC SYSTEM Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap 6: 3.3 s / 840 mm Dry cycle time according to KraussMaffei: 2.9 s / 600 mm Oil tank capacity: 1435 l DIMENSIONS AND WEIGHT Machine length: 10,190 mm Machine width: 3030 mm Machine height: 2510 mm Net weight: 38,500 kg KRAUSSMAFFEI LRX 250 ROBOT Manufacturer: KraussMaffei Model: LRX 250 Type: linear robot, 3-axis Payload: below 25 kg (including gripper and part) X-axis – stroke from mold: 900 mm Y-axis – vertical stroke: 1000/1000 mm, telescopic Ljdpj Aaxp Sofx Akmjru Z-axis – transverse stroke: 2500 mm Axis drives: servo motors Vertical axis: equipped with a motor brake Part removal side: opposite to the operating side

Condition: good (used), Year of construction: 1996, operating hours: 62,590 h, screw conveyor diameter: 50 mm, screw conveyor length: 1,300 mm, Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary Lrsdpfx Ash Nmt Dskmsu year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Lredpfoy T H A Ejx Akmeu Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m Lredpfx Asyrrwkskmju

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. Lodpfx Aozvm E Aekmjru PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: used, functionality: fully functional, Used KraussMaffei injection molding machine KM 65-160 C2, manufactured in 2002, with extensive temperature control and a separate Frigel Microgel process chiller. Manufacturer: KraussMaffei Type: KM 65-160 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine number: 641741 Order number: 646746/1 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating hours: 91,836:45 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Motor current: 30 A Main fuse: 160 A Temperature control: Multiple temperature control circuits Part removal: Conveyor belt Process chiller manufacturer: Frigel Firenze S.p.A. Process chiller model: Microgel RCD80/12HP Year of manufacture of process chiller: 2012 Serial number of process chiller: 1205114 Ledpfjz Aln Asx Akmsru Voltage: 400 V Auxiliary voltage: 110 V Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Max. high pressure: 27 bar Max. low pressure: 19 bar Medium: Water Temperature range: -5 to +90 °C Max. pressure water circuit: 8 bar Weight: 240 kg Available from APRIL 2027

Condition: used, Year of construction: 2002, functionality: fully functional, Used KraussMaffei KM 65-160 C2 injection molding machine, manufactured in 2002, with extensive peripherals and a Frigel process cooler. Manufacturer: KraussMaffei Model: KM 65-160 C2 Machine type: Injection molding machine Year of manufacture: 2002 Lrsdpfx Aksz Almromsu Machine no.: 641736 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating time: 11,481:37 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Motor current: 30 A Pre-fuse: 160 A Control system: KraussMaffei Peripherals: Material supply, MTF elevating conveyor, drum, flow monitoring / temperature control circuits, and Frigel process cooler Frigel process cooler: RCD80/12HP Year of manufacture of process cooler: 2013 Voltage: 400 V Auxiliary voltage: 110 V Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Medium: Water Temperature range: -5 to +90 °C Max. pressure: 8 bar Weight: 240 kg Available from APRIL 2027

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Lrjdpoycqc Tjfx Akmsu Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Lrsdpfx Akjzqdibomou Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Lrjdpozinanefx Akmju Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), KRAUSSMAFFEI KM 201-380 PX Injection Molding Machine Year of manufacture: 2020 Operating hours: 21,849 h Manufacturer: KraussMaffei Model: KM 201-380 PX Control system: MC6 – industrial control system based on real-time Ethernet technology Clamping unit design: five-point, double toggle lever mechanism, three-plate unit Clamping drive: servo-electric Injection and plasticizing drive: servo-electric Injection unit movement: servo-hydraulic CLAMPING UNIT Clamping force: 2,000 kN / 200 t Opening force: 300 kN Dimensions of mounting platens: 870 × 820 mm Distance between columns: 635 × 585 mm Opening stroke: 500 mm Mold height min.–max.: 250–550 mm Max. opening width: 1,050 mm Ejector stroke: 200 mm Ejector force front/rear: 39 / 19 kN Ejector speed: 350 mm/s INJECTION UNIT Screw diameter: 40 mm L/D ratio: 20:1 Injection pressure: 1,860 bar Ledpfx Aksz Atc Iemjru Injection volume: 201 cm³ Injection shot weight: 183 g Injection speed: 125 mm/s Injection rate: 157 cm³/s Screw speed: 334 rpm Plasticizing rate: 24.7 g/s Torque: 337 Nm Nozzle clamping force: 34 kN Nozzle radius: 10 mm Nozzle orifice: 4 mm ELECTRICAL PARAMETERS Connected load: 13.8 kW Protection: 63 A Heater power: 11.5 kW Number of cylinder heating zones: 5 Dry cycle according to EUROMAP 6: 2.0 s / 445 mm Oil tank capacity: 200 l WEIGHT AND DIMENSIONS Net weight with control cabinet: 14.3 t Dimensions (L × W × H): 6.12 × 2.17 × 2.21 m

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Lrodpfx Akehz Dyaemsu

Condition: ready for operation (used), The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico. Ljdpozrn Hmsfx Akmeru

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Lodpsxup Sijfx Akmoru Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t