Used Mean Well Sdr-240-48 for sale (13,968)

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. Nlsdpfszudabex Ab Ujg The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Year of construction: 2023, condition: excellent (used), Industrial Plankton PBR 1250L – Turnkey Photobioreactor for Microalgae Cultivation Complete, ready-to-run closed photobioreactor for cultivating microalgae (e.g. Nannochloropsis, Spirulina, Chlorella, Isochrysis, Tetraselmis, Haematococcus and more). Manufactured by Industrial Plankton Inc. (Canada). In service since spring 2023, well-maintained and fully operational. Offered as a complete turnkey package. Built around a custom 1250 L high-surface-area vessel (1200 L working volume) with algal-spectrum LED lighting and a touchscreen PLC that automates light, pH, CO2, temperature, nutrient dosing and harvesting – with remote access. Highlights: Easy to run and keep clean: touchscreen automation + integrated clean-in-place (CIP), no manual scrubbing Compact footprint: full 1250 L capacity in a compact vertical unit (working area approx. 3.05 x 2.44 m) Strong, controllable growth performance for high-density cultivation Continuous production approx. 200-500 L/day; 100-300 g biomass/day (AFDW) at 0.3-1.2 g/L Broad strain range (freshwater & marine) Key specifications: Total / working volume: 1250 L / 1200 L LED lighting: algal-spectrum, 2160 W Control: touchscreen HMI + PLC, real-time density sensor, remote access pH / CO2: probe & transmitter, automated CO2 dosing valve & regulator Temperature: heat exchanger, 5000 BTU chiller, 300 W heater Nutrient dosing: 3 pumps (1 mL/s), 2 filters (0.2 um) Flow/harvest: 0.1 um water filter, in-tank volume sensor, harvest pump (6 L/min) Header tank: 250 L with UV filter, ultrafilter & supply pump Nedpjzluy Hsfx Ab Ujlg Power: approx. 3160 W avg / 4170 W max; 110-120 / 220-240 V, 50/60 Hz Operational weight: approx. 2130 kg Condition: good working order, well-maintained. CO2 cylinder not included. Exact scope confirmed on inspection. Location: Lahti, Finland (EU). Inspection and live demonstration by appointment. As part of the sale we are happy to advise the new owner on the best starting species and share reference data to get running. Full illustrated PDF spec sheet available on request.

Year of construction: 2026, condition: like new (used), BINDER KBF 470 – climate chamber – 2026 – like new condition For sale: a professional BINDER KBF 470 climate chamber, manufactured in 2026. The unit is in excellent, virtually factory-new condition. Protective elements from the transport are still attached to the housing and control panel. Device specifications: * Manufacturer: BINDER GmbH, Germany * Model: KBF 470 * Year of manufacture: 2026 * Chamber capacity: approx. 470 l * Maximum temperature: 100°C * Power supply: 220–240 V / 50–60 Hz * Power: 1.40 kW * Max. working pressure of the system: 11 bar * Refrigerant: R600a * Control: modern, touch-screen BINDER controller * Condition: like new / virtually unused The KBF 470 model is designed for precise research under controlled temperature and humidity conditions. It is suitable for use in laboratories, quality control, the pharmaceutical, cosmetic, and food industries, as well as for product stability tests. Nodpfxsz Dufds Ab Uslg The greatest advantage of the offered unit is its year of manufacture (2026) and condition, which is close to that of a brand-new device.

Year of construction: 2025, condition: used, Year: 2025 Condition: Excellent Technical specifications: - Print width: 66 mm - Maximum book height: 350 mm - Printheads: EPSON i3200 - Print resolution: up to 1200 dpi - Printing speed: 0–40 m/min - Ink type: Water-based ink - Supported print data formats: JPG, PDF, PSD, BMP, TIFF, GIF, TGA, EPS - Supported operating systems: Windows 7, Windows 10, Windows 11 - Power consumption: 480 W - Power supply: 1-phase, 240 V, 50 Hz - Dimensions (L × W × H): 190 × 120 × 165 cm - Weight: 400 kg - Nodpfx Aezzynbjb Uslg ROBOJET is a printing machine designed for single-side printing on the edges of finished books. The machine features very simple and user-friendly setup. The printhead position and book transport path are adjusted automatically according to the book format. Books are transported through the machine by means of guide and transport belts. Loading and unloading of the books is performed manually. The machine is equipped with 2 EPSON i3200 printheads, offering a maximum print resolution of 1200 dpi and a print width of 66 mm. The machine achieves a production capacity of approximately 200–300 books per hour when printing on three book edges.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 1,625 kg, product height (max.): 50 mm, product length (max.): 3,080 mm, product width (max.): 2,500 mm, TECHNICAL DETAILS Print Head Technology: Piezo inkjet technology with variable drop size Drop Size: 6–42 pl Ink Type: UV-curing inks Canon IJC357 or IJC358 Color Channels: 8 Standard Color Configuration: CMYK, White, Varnish, Light Cyan, and Light Magenta Maximum Media Area: max. 308 × 250 cm Maximum Printable Area: max. 309 × 251 cm Maximum Media Thickness: max. 50.8 mm Maximum Media Weight: max. 34 kg/m² Vacuum System: Independent vacuum zones for secure hold without taping Edge-to-edge printing possible RMO Specifications Nledozy Ngdjpfx Ab Ujg Maximum Roll Width: max. 220 cm Minimum Roll Width: min. 90 cm Maximum Roll Diameter: max. 24 cm Maximum Roll Weight: max. 50 kg Core Diameter: 3 inches Core Diameter approx.: 7.6 cm Speed and Productivity Maximum Throughput: max. 52.8 m²/h Production Mode: approx. 27.0 m²/h Quality Mode: approx. 19.8 m²/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,830 x 4,660 x 1,300 mm Weight: approx. 1,625 kg Power Supply: 2 × 200–240 V Frequency: 50/60 Hz Fuse Rating: 16 A Compressed Air: 6 bar EQUIPMENT RMO for roll media UV-curing inks Canon IJC357 or IJC358 Independent vacuum zones Edge-to-edge printing function Compressed air connection for cleaning and static control

Condition: new, Ohra Cantilever Rack K60 – IPE 240 Galvanized, Set of 4, New 🧰 Product Features • Manufacturer: Ohra • Color: Galvanized • Condition: New • Uprights: 4 pcs. with a height of 3,840 mm (IPE 240) • Base: 4 pcs. single-sided base (IPE 240) • Arms: 16 pcs. with 1,200 mm arm length • Fasteners: 32 pcs. locking pins • Mounting: 8 pcs. Hilti concrete anchors • Load capacity per upright: 4,800 kg • Load capacity per arm: 1,183 kg • Frame spacing: 1500 mm • Overall height: 4,000 mm 💰 Price € 3,950.00 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available Njdpfxszdzlys Ab Uolg • Inspection and collection: possible at any time by arrangement We have over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-inclusive package: 1. Lump sum purchase: purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission auction: conducting auctions on behalf of clients. Our full service is provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: ready for operation (used), functionality: unexamined, Manufacturer Nljdpfxeziuc Ae Ab Ueg Reckermann Milling Machines GmbH, Solingen Model Kombi 1000 Year of Construction 1990 Professional Sales Description for Machine Seekers Reckermann Kombi 1000 Universal Knee-Type Milling Machine | Year of Construction 1990 | 3-Axis Digital Readout | SK40 For sale is a high-quality universal knee-type milling machine, the Reckermann Kombi 1000, built to robust German industrial standards. This machine is ideally suited for tool and mold making, mechanical engineering, training workshops, as well as repair and maintenance shops. Thanks to its stable cast iron construction, horizontal and vertical milling capabilities, and the retrofitted 3-axis digital readout, it offers high precision and versatile applications. The well-maintained overall condition and the year of construction, 1990, make this machine particularly attractive for companies looking for a durable conventional milling machine. Equipment Manufacturer: Reckermann Type: Kombi 1000 Year of Construction: 1990 Universal knee-type milling machine Horizontal and vertical milling capabilities 3-axis digital readout (DRO) Automatic feeds Rapid traverse in all axes Coolant system Central lubrication Robust gray cast iron construction German quality machine Technical Data Feature | Value Table size | 1,370 × 400 mm Travel X | 1,000 mm Travel Y | 350–390 mm Travel Z | 430–450 mm Tool holder | SK40 Spindle speed | 48–2,100 rpm Gear stages | 16 Feed | 10–1,000 mm/min Rapid traverse X/Y | 5,000 mm/min Rapid traverse Z | 2,000 mm/min Main motor | approx. 7.5 kW Max. workpiece weight | 500 kg Machine weight | approx. 3,800–4,000 kg Condition Used Very well-maintained overall condition Retrofitted with digital readout Coolant system included Sold as pictured Inspection and functional testing possible by arrangement Application areas Toolmaking Mechanical engineering Mold making Jig and fixture construction Training workshops Repair and maintenance businesses Single and small series production

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: S36-0330, laser power: 80 W, Trotec Speedy 360 – CO₂ laser with a brand-new laser tube, fully serviced Invest instead of repairing – this Trotec Speedy 360 is ready for immediate use and impresses with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has only been used in a professional setting and has always been carefully maintained. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This means you not only get a proven industrial laser but also benefit from one of the most valuable wear parts in new condition. This significantly reduces the investment risk and enables a direct start to production without additional follow-up costs. Proven Trotec quality The Speedy 360 has been one of the most powerful and reliable CO₂ laser systems in its class for years. Its high processing speed, precise positioning, and excellent repeatability make it the first choice for professional users in industry, crafts, and advertising technology. Whether for individual production or series production – the Speedy 360 consistently delivers precise results. Versatile applications The machine is suitable, among other things, for processing: ✔ Acrylic ✔ Wood and plywood ✔ MDF ✔ Leather ✔ Paper and cardboard ✔ Rubber ✔ Textiles ✔ Plastics ✔ Glass (engraving) ✔ Coated metals (marking) This makes the laser ideal for companies in the fields of advertising technology, sign manufacturing, model making, personalization, industrial marking, or prototype construction. Your advantages at a glance ✔ New laser tube – ready for immediate use ✔ Very well-maintained overall condition ✔ Precise engraving and cutting quality ✔ High working speed ✔ Proven Trotec technology ✔ Easy operation with JobControl ✔ Reliable industrial machine with high value retention Inspection is highly recommended We invite you to personally inspect the excellent condition of the machine. An inspection and a test run can be arranged at any time by appointment. Njdpfxozlb Abj Ab Ujlg

Condition: ready for operation (used), PRODUCT INFORMATION Total weight (standard jib, without accessories): 64.5 kg (142 lb) Lifting capacity (SWL): Regular jib: 227 kg (500 lb); Extended jib: 130 kg (287 lb) Battery pack weight: 5.0 kg (11 lb) Turning diameter: 1222 mm (48 in) Minimum door requirement: Standard Base (KMCS…) & Low Height Base (KMCL…): 717 mm (28.25 in); Extra Low Height Base (KMCEL…): 770 mm (30 3/8 in) Operating forces of controls: 2.5–3 N Nsdpfjxvxf Ijx Ab Ujlg ELECTRICAL Degree of protection: IPx7 (Hand control), IP24 (MAXI MOVE) Internally powered: 24 Vdc Battery type: Rechargeable (Sealed Lead Acid) Battery capacity: 24 Vdc, 4.0 Ah to 5.5 Ah Battery charger input (part #NDA8200): 100 to 240 Vac / 50 to 60 Hz Up and down current limiting: 12 ± 1 Amp Duty cycle: 15% (max. 2 min continuous use) Sound power level (up): 61.9 dBA Sound power level (down): 61.7 dBA Medical equipment classification: Type BF protection (IEC 60601-1 compliant) COMPLIANCE / WARNINGS Compliance: IEC 60601-1-2 (Electromagnetic Compatibility), ISO 10535 (except with stretcher) RF communication warning: Keep portable RF equipment at least 30 cm away from device DIGITAL SCALE SPECIFICATIONS Weight range: 227 kg (500 lb) Display resolution and type: 0.1 kg (0.2 lb), liquid crystal display Accuracy (in service): • 2–50 kg ±50 g / 4–110 lb ±0.1 lb • 50–200 kg ±100 g / 100–440 lb ±0.2 lb • 200–227 kg ±150 g / 440–500 lb ±0.3 lb OPERATION AND STORAGE CONDITIONS Ambient temperature range: Operation: 5° to 40°C (+41° to +104°F); Storage: -25° to 70°C (-13° to +158°F) Relative humidity range: Operation: up to 93% (non-condensing); Storage: up to 93% (non-condensing) Atmospheric pressure range: Operation: 795 hPa to 1060 hPa (2000 m max); Storage: 500 hPa to 1060 hPa Comes with a wall-mounted charger block, and strap. We have 4 pcs in stock with fully functional battery. Good working condition. Please check out our other listings as well.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Nodpfx Abezu T Sms Uslg Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: good (used), 3D Systems ProJet MJP 2500 Plus MultiJet 3D Printer Description: Professional MultiJet 3D printer / MJP system 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD printing mode For sale is a used professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for the production of precise plastic components, functional prototypes, concept models, as well as jigs and tool applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Printing modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD mode: 800 × 900 × 790 DPI Layer thickness: 32 µm UHD mode: 1600 × 900 × 790 DPI Layer thickness: 32 µm Dimensions: 1120 × 740 × 1070 mm (W × D × H) Weight: 211 kg Power supply: Nodpfx Aboz Erdas Uelg 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet USB Features: Integrated touch display Material system for build and support material Automatic material bottle switching Network connection USB port 3D Sprint software support Material containers as shown in the pictures Applications: Functional prototypes Concept models Form and fit testing Jigs and fixtures Tool applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Shipping by freight forwarder possible. Subject to changes, errors and prior sale.

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C Nledpfx Abjtp Df Hs Usg • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2011, SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 µm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample types: Supports standard SBS plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes and microscope slides Throughput: Can expose up to 250 plates per day Nlodswv Rayspfx Ab Ujg Automation: Fully automated with options for integration into robotic systems Voltage (U): 100 - 240 V AC 50/60 Hz Power (P): 295 VA max Manufactured: 01/2011 You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 70 mm, cutting width (max.): 1,200 mm, saw blade diameter: 125 mm, rotational speed (max.): 3,800 rpm, total length: 6,000 mm, total height: 1,300 mm, overall weight: 3,500 kg, year of last overhaul: 2024, cutting length (max.): 4,200 mm, collet bore: 75 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, main saw diameter: 350 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, space requirement length: 6,500 mm, space requirement width: 3,000 mm, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable. Nljdpfjuyvnijx Ab Usg

Condition: new, functionality: fully functional, Laser Core Identification YLP: Ytterbium Laser Pulsed. This identifies it as a pulsed nanosecond fiber laser operating in the near-infrared spectrum (typically 1064 nm wavelength). HP: High Power. Indicates the heavy-duty sub-series designed for fast processing speeds and high ablation rates compared to the standard, low-power desktop marking modules. 1: Indicates the Optical Beam Quality (\(M^{2}\)) standard or series generation (typically targeting a beam parameter product near \(M^2 \leq 2.0\) for clean, tight focal spots). 30x240: Pulse Width / Duration Configuration. Refers to its tunable or specific pulse length capability (in nanoseconds), optimizing it for balancing rapid material removal without massive heat-affected zones. 200-200: Defines the power metrics.200 W Average Output Power: Capable of sustaining continuous pulsed work at 200 Watts. 200 kHz Pulse Repetition Rate (PRR): The maximum frequency of the laser pulses, determining how quickly it can scribe or clean surfaces. Electrical Requirements (90-240 VAC) Power Input: Features a universal, autoranging power supply unit (PSU). It safely plugs directly into standard global wall grids spanning 90V to 240V AC (Single Phase, 50/60 Hz) without needing heavy industrial 3-phase transformers. Core Applications Because of its high 200W power and high-frequency pulsed delivery, this model is typically integrated into CNC machinery or robotic cells for: High-Speed Laser Cleaning / Ablation: Removing rust, paint, oxides, and coatings from metals without damaging the base substrate. Deep Laser Engraving & Marking: Precision engraving on hard metals, ceramics, and highly reflective materials (like aluminum or copper). Silicon / Solar Panel Scribing: High-throughput cutting or edge deletion tasks in manufacturing. Nledpfey Udyqox Ab Uog Brand new never used. Please check out our other listings as well.

Condition: used, For sale is a two-stage Leybold vacuum pump unit, consisting of a RUVAC WA 501 roots/rotary piston pump and an SOGEVAC SV 300 B rotary vane pre-pump. The components are mounted together on a base frame with a collection tray. Technical data and specifications: - RUVAC WA 501, catalog number 11730 - Nominal pumping speed RUVAC: 505 m³/h - Maximum pumping speed at 50 Hz: 410 m³/h Njdpfx Aozzr Ndeb Uelg - RUVAC motor: 2.2 kW, IP55 - SOGEVAC SV 300 B, catalog number 960717 - Year of manufacture SOGEVAC: 2019 - Effective pumping speed SOGEVAC at 50 Hz: 240 m³/h - Nominal pumping speed SOGEVAC: 280 m³/h - Motor power SOGEVAC: 5.5 kW - SOGEVAC nameplate weight: 207 kg - Last visible service record: 08/2024 Visible scope of delivery as per the images: - RUVAC WA 501 with motor - SOGEVAC SV 300 B with motor - Direct adapter and connection assembly - Cooling/fan unit - Sensor and connection cables - Base frame with collection tray Used condition with typical signs of use and storage, as well as some minor rust on the frame. The functional condition and achievable vacuum performance have not been re-checked after disassembly; therefore, it is sold as untested. A control cabinet, external cables, or documentation are not shown in the images and are not part of the described scope of delivery. Scope of delivery as per the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an extra charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: excellent (used), Year of construction: 2008, Manitou 170 AETJL Aerial Work Platform with 16.90 m Working Height The 170 AETJ-L aerial work platform makes even the most remote work areas easily accessible. Equipped with an articulated structure, this model boasts exceptional offset and overhang capabilities, allowing you to work at various heights and in different locations without having to reposition the machine. Take advantage of its flexible hydraulic movements for precise positioning within the work area! With its perforated platform floor, tilt and load sensors, cylinder valves, and negative braking system, the 170 AETJ-L aerial work platform ensures safe operation. ...] This machine complies with: European Directives: 2006/42/EC - Machinery (recast EN 280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low Voltage) Manufacturer: Manitou Design: Articulated telescopic boom lift Type: 170 AETJ Operating hours: 994.6 Year of manufacture: 2008 Capacity Working height: 16.90 m Ground clearance (access): 0.40 m Platform height: 14.90 m Maximum lateral reach: 9.43 m Overhang/articulated joint: 7 m Body rotation angle (top/ground): +65° / -65° Work platform load capacity: 200 kg Superstructure rotation: 355° Work platform rotation (right/left): 66° / 59° Number of persons (inside / outside): 2 / 2 Weight and tire size Weight of work platform: 6910 kg Work basket dimensions (length x width): 1.20 m x 0.92 m Overall length: 6.84 m Overall width: 1.75 m Overall height: 1.97 m Overall length (retracted): 5.12 m Height (retracted): 2.04 m Length of boom: 1.26 m Counterweight offset (superstructure at 90°): 0.08 m Outer turning radius: 4.30 m Ground clearance (center of wheelbase): 0.14 m Wheelbase: 2 m Performance Travel speed - transport mode: 5 km/h Travel speed - working mode: 0.60 km/h Grade capability: 22 % Permissible inclination in working mode: 3° Tires Non-marking solid rubber tires Drive wheels (front/rear): 0/2 Steering wheels (front/rear): 2/0 Braked wheels/wheels: 0/2 Motor/Battery Electric motor rated power 2 x 4.50 kW Electric emergency pump: 3.70 kW Battery: 48 V Battery rated voltage/capacity: 48 V x 240 Ah Battery energy: 11 kWh Integrated charger (V): 48 V / 30 A Financing through our bank is also available. Njdpsqazadofx Ab Uolg komplett-konzept.leasingo.de More new and used items - find them in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Nsdpfx Abezn I N Hs Uslg Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 109292, conveyor belt width: 650 mm, total width: 1,100 mm, total height: 1,500 mm, total length: 1,800 mm, overall weight: 400 kg, input voltage: 240 V, table height: 800 mm, working height: 800 mm, input current: 3 A, ISC Recycle offers a used, automated MOSCA Sonixs-TR-6 Pro strapping machine, sold as is. This industrial machine is designed for the automatic strapping of cartons, packages, and unit loads. It is particularly well-suited for logistics, industrial, and order preparation environments requiring reliability, consistency, and increased productivity. - Brand: MOSCA Njdpex I Naiefx Ab Uolg - Model: Sonixs-TR-6 Pro - Type: Automated strapping machine - Serial number: 109292 - Usable inner width of the frame: 800 × 800 mm - Year: 2015 - Power supply: 100–240 V / 50–60 Hz - Condition: Used – sold as is Advantages: - Fast and precise automatic strapping - Robust design for heavy-duty use - Suitable for logistics and industrial lines - Efficient solution for optimizing packaging and shipping - Quantity available: 1 unit - Price: €7,650.00 (excluding VAT) Option: Rothacker MOSCA conveyor: €400 (excluding VAT) Availability: Immediate

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: AC, overall weight: 280 kg, input frequency: 60 Hz, compressed air connection: 8 bar, For sale is a fully functional, tested EZset tool presetter, type EZS420C2X, manufactured in 2017, complete with monitor and printer – tested and ready for immediate use. This system is of German manufacture (EZset GmbH & Co. KG, Pleidelsheim) and is designed for precise use in tool and machine construction. The unit has been regularly maintained, operated exclusively in a climate-controlled measuring room, and is in very good technical and visual condition. Technical data: - Manufacturer: EZset GmbH & Co. KG - Model: EZS420C2X-00074 - Year of manufacture: 2017 - Original purchase date: 23.11.2018 (invoice included) - Power: 600 VA - Voltage: 100–120 V / 200–240 V AC · 50/60 Hz - Pneumatics: 6–8 bar (80–110 PSI) - Weight: 280 kg Nedoy S Ti Nspfx Ab Uolg - Tool holder: Adapter-SK 40 & Adapter-HSK 63 Measuring ranges: - Z = 420 mm - D = 420 mm - max. jaw diameter = 100 mm Operating monitor: MOSTRON PPC13-113286-F (12–24 V DC, 50 W) with touchscreen Operating system: Windows Embedded Standard (licensed) Backup software: Drive Snapshot 1.4 (licensed) Label printer: TSC Auto ID DT2205 (24 V, TÜV and CE certified) Equipment & Functions: - Precise measurement of tools in the X and Z directions - High-resolution camera and screen display - Pneumatic tool holder - Intuitive touch operation with EZset software - Label printer for tool identification - Fully integrated control and pneumatics - All original nameplates and CE certificates are available Condition: - Fully functional and ready for use - No error messages or defects - Clean, well-maintained overall condition - Directly from ongoing operation Scope of delivery: - EZset EZS420C2X unit - MOSTRON operating monitor - TSC label printer - Pneumatic connection - All connecting cables and accessories as shown in the pictures

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Njdoxnlflepfx Ab Uelg

Condition: used, functionality: fully functional, Agilent 6510 System + PC & Software. The set includes: -Agilent 6510 Q-TOF LC/MS -Agilent 1260 Infinity G1376A Capillary Pump -Agilent 1200 Series G1377A Micro Well Plate Autosampler Nlodpjt T T Tnefx Ab Ujg -Agilent 1200 Series G1379B Micro Vacuum HPLC Degasser -PC & Software The Agilent 6510 Quadrupole Time-of-Flight LC/MS delivers unsurpassed Q-TOF sensitivity in a compact, bench-top design. With the 6510’s tenfold sensitivity advantage, you detect critical, low-level components that are out of reach of other Q-TOF instruments. At the same time, fast data acquisition means you can acquire one MS and five MS/MS spectra per second, for higher-quality data and more structural information from complex samples. And ultralow-ppm mass accuracy maximizes confidence in your results. Features: -Attomole-level sensitivity – Sensitivity unequaled by any Q-TOF on the market today enables the 6510 to detect more low-abundance components. -Better than 3-ppm mass accuracy – Outstanding mass accuracy, typically 1-2 ppm, rivals FTMS instruments and increases specificity and confidence in results. -Wide in-spectrum dynamic range – 3-4 orders of magnitude in-spectrum dynamic range enables identification of less-abundant compounds in the presence of more-abundant compounds and makes overall operation easier. -Fast MS and MS/MS acquisition – Fast spectral acquisition improves the identification of unresolved components in complex samples and makes the 6510 compatible with the latest fast chromatography. -Multiple ion source options- The best selection of ion sources in the LC/MS industry-including the revolutionary HPLC-Chip/MS and multimode ESI/APCI sources-allow the 6510 Q-TOF to address a wide range of LC/MS applications Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Dimensions: Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Nsdozlq E Sjpfx Ab Uolg Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling. This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long runtimes between refills. The built-in 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited. Best for: heating and drying halls, workshops, greenhouses, storage rooms, and construction sites requiring long runtimes without refueling. Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, with exhaust vented through the Ø150 mm chimney. What the specifications mean in practice: • 80 kW heating output – heats large halls and open working areas, not just a corner. • 1000L external + 69L internal tank – long runtime with fewer refills. • 2,000 m³/h airflow – distributes warm air across a wide area. • Thermostat + digital display + 10m external room thermostat – automatic operation. • Indirect firing, Ø150mm chimney – combustion gases are vented outside, keeping the air clean for drying. • Large-wheel chassis – can be repositioned by a single person. Complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses. Technical data: – Model: APEX BGO-80B (Type 56217) – Heating output: 80 kW / 68,800 kcal/h – Fuel: Diesel/heating oil – Consumption: 7.5 l/h – Mains voltage: 230V~50Hz – Fan motor: 900W – Blower output: 2,000 m³/h – Blower outlet: 340mm – Chimney: Ø150mm – Internal tank: 69 l – Dimensions: 1330x568x1028mm – Weight: 59 kg Njdpfozrwapex Ab Uelg – Manufactured: 01/2026 – Protection: IPX4 Condition: Well-maintained, ~200 operating hours, fully functional. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, test run possible before pickup. Nameplate photos and a running video are available; in-person inspection in Kerns OW by appointment. You may verify the identity, condition, and operation before paying – we guarantee the machine is as described, complete, and functional at the time of inspection. Why buy now: a single used unit, not stock. Once sold, this configuration (heater + tank + certified basin, sold together) is gone. First-buyer bonus: free functional test run before pickup, tank connected and thermostat set to your target temperature, at no extra cost. Valid until Sept 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed Nlsdpszdf Ruefx Ab Ujg - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling