Used Mori Seiki Nl 2500Y for sale (3,845)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Hnsdpfx Aezcuyijnvon Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Tool interface: Capto Tailstock Quill diameter: 85 mm Quill taper: MK 4 Hsdpfx Anowxahfevonn Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement system

Condition: like new (used), Year of construction: 2017, operating hours: 1,075 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: Fanuc, table width: 500 mm, table height: 500 mm, table load: 500 kg, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, Horizontal Machining Center DMG MORI NHX 5000, 2nd Generation Control: M730UM Celos X: 730mm Y: 730mm Z: 880mm Milling Spindle Interface: HSK63-A Speed: 20-15,000/min Hnodpfx Ajzdllwonvjn Power: 37 kW Torque: 250 Nm Pallets Number: 2 Size: 500x500 Load capacity: max. 500 kg Type: Grid pattern Tool magazine Positions: 60 Type: Rotary Coolant system: Knoll system, 70 bar Mist extractor The machine comes from a research institute and has only run for approximately 1075 spindle hours to date. Condition: as new Availability: short notice

Condition: used, Mori Seiki SL-25 B5 Turning Centre with Fanuc Series 15-T CNC Control, Kitigawa B210 Powered 3 Jaw Chuck, 12 Position Tool Turret, Tailstock, Swarf Conveyor. S/No. 1988 - No CE Mark, Terms and Conditions Apply Please Note: These lots are located in Italy. All/Any tooling is being offered as specifically described. Hedezcnflspfx Anvjnn

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) Hnedszabltspfx Anvon * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min Hnedpfsy Uxigsx Anvjn • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2006, This 4-axis MORI SEIKI NV-5000α1/40 was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 × 600 mm with a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV-5000α1/40 vertical machining centre we have for sale. Contact us for further details. Hnedpfjy Uxaxsx Anvjn

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, table load: 400 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2010. It features an X-axis travel of 560 mm, Y-axis travel of 560 mm, and Z-axis travel of 630 mm. The machine has a spindle speed of 14,000 rpm and a tool magazine capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH 4000 DCG horizontal machining centre we have for sale. Contact us for further details. • B-axis: Continuous Additional equipment Hedpfxsy Uw I Is Anvenn • Pallet cubes: 250 × 250 × 600 mm and 400 × 150 × 600 mm • Various tooling • D'Andrea boring head attachment • Full machine manuals • SEI filtration/extraction unit • KUBE mist collector system Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control MSX 501 spindle turning speed - stepless 14000 U/min tool taper BT 40 pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach Hsdpfsygx D Tex Anvonn table-size 500 x 500 mm total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 48,000 m/min, controller model: Mitsubishi Meldas MSC-802M, The MORI SEIKI TV-30 is a compact and precise vertical machining center, designed for drilling, tapping, and milling operations on small components. Manufactured in 1996, it is equipped with a Mitsubishi Meldas MSC-802M control and features characteristics ideal for high-speed light machining work, with an automatic tool changer and a well-sized table relative to its compact footprint. General Technical Data Brand: MORI SEIKI Model: TV-30 Category: Vertical Machining Centers Year of manufacture: 08-1996 CNC Control: Mitsubishi Meldas MSC-802M Machine weight: 2 tons Machine Dimensions: Length: 1,200 mm Width: 1,720 mm Height: 2,260 mm Spindle Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): - 3.7 / 2.2 kW (continuous) - 5.5 / 3.7 kW (30 min) Machining Capacity X-Axis travel: 420 mm Y-Axis travel: 300 mm + 60 mm Z-Axis travel: 250 mm Maximum drilling diameter: 13 mm Maximum tapping diameter: M12 Table Table size: 600 x 340 mm Table load capacity: 150 kg Feed Rates Rapid traverse X / Y / Z axes: 48,000 mm/min Working feedrates X / Y / Z in linear interpolation (max): 12,000 mm/min Manual feedrates: 0 – 1,260 mm/min Tool Changer Tool taper: BT-30 Shank: MAS-P30T-1 45° Tool magazine capacity: 10 stations Max. diameter of adjacent tools: Ø 80 mm Max. tool length: 200 mm Hnodpfsxfaw Dsx Anvon Max. tool weight: 3 kg Other Equipment Manuals, Electrical Schematics and CE Declaration 100-liter coolant tank with pump Transformer

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 901, type of input current: three-phase, bar diameter (max.): 40 mm, collet bore: 42 mm, We are offering this used Mori Seiki SL-150S/500 CNC lathe with sub-spindle, manufactured in 1998. Manufacturer: Mori Seiki Model: SL-150S/500 Serial number: 901 Phases: 3 Rated power: 32 kVA Date of manufacture: 9/1998 Includes LNS Quick Load Servo 65 bar feeder (manufactured in 2007). Includes reducing sleeves. Hedpfx Aszdd Dyenvsnn Includes Hainbuch collet chuck system (main and sub spindles have the same collet size for Hainbuch BZI 42). Includes 120x collet. Includes clamping blocks for the turret. Excludes tooling. The machine is currently still in production and needs to be replaced with a new one. The machine has been well maintained. Please note that this is a machine without powered tools! If you have any questions or would like more information, please feel free to send us a message.

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts from MORI SEIKI VL250 Bj.2000 1.turret(not complete) Ball screw with nut X and Z axis X and Z axis guides parts are from new machine Motor X-axis See photos. Hnsdpfxscbinno Anven

Condition: good (used), Year of construction: 2007, table length: 800 mm, table width: 800 mm, Equipment: CE marking, documentation/manual, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control system: Fanuc 18 imb + Mapps 2 Year of manufacture: 2007 TECHNICAL DATA: Travel ranges: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse rate (X/Y/Z): 50 m/min. Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Number of tool positions: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (L x W x H): 9,200 x 4,900 x 3,920 m Hsdpfxov Nhylo Anvsnn Equipment features: Internal coolant system (ICS): bar Chip conveyor High-pressure pumps

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: 840 D solutionline, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Manufacturer: DMG MORI Pfronten Model: DMC 85 monoBLOCK RS3 Year of manufacture: 2014 Control system: Siemens 840D solutionline Shopmill Approx. 22,500 program hours Main spindle Interface: SK40 DIN 69871 Hedpszamn Tofx Anvonn Speed: 20-14,000 /min Spindle replaced by DMG MORI approximately one year ago Tool changer Type: Double gripper with three-phase motor Magazine: 60 positions X: 935 mm Y: 850 mm Z: 650 mm A: +/- 120° C: 360,000 * 0.001, continuous 5-axis simultaneous machining: YES Automation: DMG MORI RS3 Number of pallets in the system: 3 Additional pallets: 2 Equipment 3D measuring probe Operating mode 4 Extraction system IKZ 40 bar with belt filter system Chip conveyor Coolant gun Hydraulic clamping system Media feedthrough through the pallet WITHOUT the clamping devices and tool holders shown in the images!

Condition: excellent (used), Year of construction: 2001, operating hours: 14,200 h, turning length: 1,020 mm, turning diameter: 540 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 565 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,077 mm, overall weight: 12,500 kg, 🛠️ Description For sale is a powerful CNC turning and milling center, a MORI SEIKI MT 2000SZ, with a counter spindle and Y-axis. ⚙️ Technical data Control system: MSX-501 Travel range X / Y / Z: approx. 565 / 160 / 1,077 mm Max. turning diameter: approx. 540 mm Max. turning length: approx. 1,020 mm Main spindle: up to approx. 4,500 rpm Tool spindle: up to approx. 8,000 rpm Tool holder: Capto C6 Number of tool positions: depending on the version Axes: X, Y, Z + counter spindle ⏱️ Operating data Spindle: operating hours: approx. 33,600 h Machining time: approx. 14,200 h Counter spindle: operating hours: approx. 18,100 h Machining time: approx. 11,500 h (further data see images) 📦 Equipment Counter spindle (SZ version) Powered tools Y-axis Chip conveyor Coolant system Multitasking function (turning & milling) 📌 Condition The machine is in used, but functional condition. Tool holders (turning tools and Capto) are included in the scope of delivery. Cutting inserts are not included. 🚛 Delivery & Conditions Sale is ex works / free on board Dismantling and loading can be organized upon request Duebhu Hndey Sm U Sekou Sale without warranty 📞 Contact If you are interested or would like further information, please do not hesitate to contact us. Hnsdpfx Anezclmajven

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min Hodpfx Anjx Hpytovjnn total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW Hjdpsx Hpymsfx Anvonn tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel distances: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Hnodpfx Ajt Rg E Ssnvjn Indexing accuracy: + / - 2 sec. Repeatability: + / - 1 sec. Pallet clamping force: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: Work end display with warning light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm 3626

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Hedpfx Aewhkcxsnvonn Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, overall weight: 9,500 kg, number of axes: 6, This 6-axis DMG Mori Seiki NZ2000T3Y2 was manufactured in 2008. It features a maximum machining diameter of 200 mm and a maximum machining length of 260 mm. The bar machining capacity is 65 mm, with an X-axis travel of 210 mm, Z-axis travel of 810 mm, and Y-axis travel of 110 mm. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki NZ2000T3Y2 machine we have for sale. Contact us for further details. • Max. machining diameter: φ200 mm • Max. machining length: 260 mm • Bar machining capacity: φ65 mm • Phase: 3 • Frequency: 50 Hz • Voltage: AC 200 V • Full load current: 283 A • Spindle motor current rating: 105 A • Short circuit current: 1 kA Hnsdpfey Tvdfex Anven • Maximum voltage: 220 V • Rated power: 98 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Hnsdpfxex R Enbe Anvjn Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 530 mm z-travel 510 mm Hnedex R Emwjpfx Anvjn Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -038

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 Hnedsv E R E Njpfx Anvjn collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Hnodetqmqwspfx Anvsn Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t Hnodpfx Ansvzhiqevsn dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC