Used Neptronic Skge 3170-2Nc for sale (61)

Condition: used, Tipper or trailer 3170 kg L x W x H: 4.0 x 2.3 x 2.6 m Bed height: 1.4 m It is an air tipper Sideboards: steel Pjdpfx Adszkgvdskogp Available from: immediately

Condition: used, functionality: fully functional, mileage: 1,40,541 km, power: 114 kW (155.00 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 3,170 kg, maximum load weight: 1,510 kg, overall weight: 4,690 kg, axle configuration: 4x2, next inspection (TÜV): 06/2027, fuel: diesel, color: silver, driver cabin: other, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 7, total length: 6,400 mm, total width: 2,300 mm, total height: 2,890 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,300 kg, loading space length: 2,300 mm, loading space width: 2,100 mm, loading space height: 1,800 mm, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, soot filter, trailer coupling, truck registration, Ford Transit tipper truck with tarpaulin and drop-side body Double cab with 7 seats Vehicle from first owner Formerly a municipal/government vehicle Low-emission Euro 5 Green environmental badge Psdpfx Ajzkmmcjdkjgp 6-speed manual transmission Air conditioning Auxiliary heater Electric windows Electric exterior mirrors Power steering Central locking with remote control Driver and passenger airbags Radio with Bluetooth hands-free system Multi-function steering wheel Trailer coupling, 2,800 kg towing capacity Raised front and side panels Lashing points on the loading area Large tool cabinet behind the cab Small tool box under the loading area Twin-tire rear axle Yellow LED rotating beacon Payload 1510 kg Unladen weight 3170 kg Permissible total weight 4690 kg Wheelbase 3954 mm Engine 2.2 L - 114 kW CDI catalytic converter Low-emission according to Euro 5 emission standard Formerly a city vehicle Errors, changes and prior sale reserved We only sell according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale reserved. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m. and on Saturdays by appointment. Outside these opening hours, telephone appointments can be arranged. We will gladly accept your existing used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale are subject to change!

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] - Travel : 610 [mm] TURNING-MILLING SPINDLE Pgedpfx Adezgx Ahskop - X stroke : 580 [mm] - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 140 - Tool exchange time : 6 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 114 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4800x2960 [mm] - Machine height : 3170 [mm] - Machine weight : 18500 [kg] MACHINE HOURS - Number of hours under power : 57184 [h] - Spindle hours : 1756 [h] - Number of turning-milling spindle hours : 1694 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 4300 kg Movement X-Axis Movement 3860 mm Z-Axis Movement 185 mm Y-Axis Movement 1793 mm Main Drive Pgedpfxex D Inze Adksp Number of axis 3 Spindle Speed 24000 RPM Spindle motor power 17 kW This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: new, Year of construction: 2025, machine/vehicle number: 011/2020, STK-10000i is low-cost vacuum system from SAF TEKNIK and it offers very good filtration with a lot of power and airflow! It includes multiple filter columns and filter cleaning through vibrating. It also has a separator for bigger parts, which prevents damage to the whole system. TECH. SPECIFICATION: Podpfx Aof D S Trjdkegp - Motor power: 11 KW - NEW: Frequency inverter for main motor - Exhaust capacity: 10000 m3/h - Air speed: 41 m/s - filter area: 30 m2 - bin volume: 810 Liters - exhaust inlet diameter: 355 mm - weight: 740 kg - dimensions: 3170 mm X 1200 mm X 2330 mm OTHER VERSIONS, also available: - STK-6500 (6500 m3/h) - STK-8000 (8000 m3/h)

Condition: new, Technical data: Max saw blade diameter: 350 mm Min saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring tool diameter: 120 mm Scoring tool spindle diameter: 20 mm Undercutter on a separate engine Tilting saw from 0° to 45° Manual adjustment of the angle of inclination of the saw blade Electric height adjustment of the saw Trolley length: 3200 mm Cart lock Eccentric clamp Table extensions Psdjmiii Sspfx Adksgp Table height: 875 mm Culag: 120mm Ruler 3170 mm long with 2 stops Extraction port diameter: 125 mm Cover Safety switch Power: 400V Total power: 6.5 kW Machine dimensions Length: 3450mm Width: 3500mm Height: 1300mm

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Pgsdpfjv Nqppsx Adkop Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp.

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min - Speed: 17-42 m/min - 3 m or longer (wood length) Dimensions (without infeed and discharge table) L = 9840 mm Pgodpfsfn Iu Iox Adkep Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input with start for 4 kW geared motor output Main starter Emergency STOP

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block Pedpfx Aey Nb Tkedkegp (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS Podpfomkhynex Adkogp pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm MACHINE DETAILS weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm

Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale VIDEO BELOW: Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: CNC hydraulic Press Brakes New 2010 Location: United kingdom Podpfx Aehtm Iksdkogp Low hours – 14,000 Specification Convert Specs to Imperial Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Number of axis: 7 axis 5 axis back gauge Weight 18298 (LBS) Control CNC (T3000) 132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake Year: 2010 Specification from new: Machine – Stable machine frame as welded all-steel construction – Ram, highly resistant to torsional forces – Spherical ram suspension, with ram tilt – Electro-hydraulic downstroking drive with 4-cylinder technology – Proportional valve technology – Modern block hydraulics – Electronic pressure balance – Measuring system with glass scale and frame deflection compensation – Hydraulic oil filled in the machine (lifetime lubrication) – Oil cooler Backgauge System – Backgauge system 2-axes with rack and pinion-drive for X- and R-axis, – 2 pieces back gauge fingers with safe adjustment in front of the machine Tool Holder – TRUMPF Upper tool clamping, manual and hardened – Lower tool clamping, manual and hardened Crowning – Self-regulating crowning system – Additional hydraulic CNC-crowning Control – Machine control: T3000 colour, DELEM based on Real Time for Windows – USB interfaces for keyboard, mouse, etc. Safety – Footswitch for Emergency up, down and emergency stop – Safety equipment: Side doors and manual shutter roller at the rear Services – Installation, start-up and instruction Options for Backgauge System – Back gauge system 5 axis Options for Tool Holder – Amada US Style fast clamping of upper tool holders (segmented, on entire working length) Options for Safety Device – BendGuard Options for Material Handling – Support bracket (2 pc) Delivery – June 2011 Video below: Used Trumpf V and C series cnc pressbrakes also available in stock for sale. We are always interested in buying used Trumpf pressbrakes and machines such as: TruBend 3066 TruBend 3100 TruBend 3170 TruBend Series 5000 TruBend 5085 Trubend 5130 TruBend Series 7000 TruBend 7050 TruBend 7036 TruBend 7050 TruBend Series 8000 TruBend 8230 Trubend 8400