Used R250 Sawing Machine for sale (65,454)

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Nlsdpfxsiv Hdvo Aqvjb Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Width stop adjustment: manual Display saw blade angle: scale Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Nledpfxsy E Snqe Aqvjb Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: saw cut finish 2. Brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: handwheel Height display: mechanical counter Feed speed: 4 - 12 m/min Saw cutting unit motor power: 1.1 kW Brush motor power: 3 kW Nledpsgrladefx Aqvjb Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 1400 mm Weight: 550 kg

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Njdpoycqhcjfx Aqvjlb Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm Nsdpfx Aoy Dcqysqvslb - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Nedey En E Sopfx Aqvjlb Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Nlsdeudim Dspfx Aqvsb Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels Njdpfx Asmrp Tloqvslb User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 400V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Njdpey Emgbofx Aqvslb Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW Nlsdpfx Aji D Di Soqvjb TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Nledowq A Dyspfx Aqvob Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Wegoma table saw machine offered. Type: TS 250 Nledpfx Aqsgmb Agsvjb For more information call us or send an e-mail.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Operating mode: Semi-automatic Machine type: Horizontal band saw Cut: Miter cut Nedpfx Ajyxczneqvelb Miter cutting range: -60° to +60° Drive power: 3 kW, 3 x 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 4780 x 34 x 1.1 mm Material loading height: 761 mm Minimum remnant length: 60 mm Sawing capacities: - 0 degrees = Round D350 mm, Rectangle 510 x 350 mm, Square 350 mm - 45 degrees R = Round D350 mm, Rectangle 400 x 100 mm, Square 340 mm - 45 degrees L = Round D350 mm, Rectangle 415 x 100 mm, Square 350 mm - 60 degrees R = Round D250 mm, Rectangle 260 x 100 mm, Square 240 mm - 60 degrees L = Round D270 mm, Rectangle 280 x 100 mm, Square 260 mm Dimensions L x W x H = 2570 x 1070 x 1500 mm Weight: 710 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, First installation in 2024 Operating mode: semi-automatic Machine type: horizontal band saw Cut: miter cut Miter cutting range: -60° to 60° (L/R) Drive power: 5.5 kW, 3 × 400 V/50 Hz Nljdpfx Aoyxcu Ueqvob Saw blade speed: 20–120 m/min Saw blade dimensions: 7900 × 54 × 1.6 mm Material loading height: 810 mm Shortest remnant length: 40 mm Smallest saw diameter: Ø 10 mm Sawing capacities: - 0 degrees = round D640 mm, rectangle 820 x 640 mm, square 640 mm - 45 degrees R = round D560 mm, rectangle 560 x 400 mm, square 540 mm - 45 degrees L = round 580 mm diameter, 580 x 560 mm rectangle, 560 mm square - 60-degree R = Round 380 mm diameter, 380 x 250 mm rectangle, 360 mm square - 60-degree L = Round 400 mm diameter, 400 x 530 mm rectangle, 400 mm square Dimensions (L x W x H): 3750 x 2400 x 2700 mm Weight: 2500 kg

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic Nlsdovzt Eqopfx Aqvob total power requirement 28 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Year of construction: 1992, condition: used, Vollmer Nledpfxokmnyfj Aqveb Saw blade shearing machine type NS 700 Year 1992

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm Nodeq S Uwbspfx Aqvelb for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock and ready for shipping Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) Nlodped Izq Hjfx Aqvob - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron Nodpfx Ajpl Tgmoqvolb - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Technical specifications and equipment installed on the machine (standard and options): - No.2 new FOM carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) Nlsdpfswk R A Djx Aqvob - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: good (used), Circular Saw Blade Sharpening Machine Manufacturer: unknown Circular saw blade diameter: up to approx. 200 mm Grinding wheels: 160 x 15 mm Connection: kW Nlsdpey Hgplsfx Aqvsb Saw dimensions: 320 x 340 x 500 mm Base cabinet dimensions: 410 x 410 x 590 mm Accessories/Equipment: Condition: good Weight: 100 kg Overall dimensions: 410 x 410 x 1,100 mm

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right Nedey H Dmhspfx Aqvolb - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Nlsdsy Hv Uqspfx Aqvjb Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Nlodpoy Hv Nuofx Aqveb Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm

Condition: excellent (used), HSS saw chamfering machine LOROCH model BK450 Nlodpfx Aqoywzvbsvsb