Used R250 Sawing Machine for sale (67,147)

Condition: used, Year of construction: 1985, RIVO Risstaler R200 GA Saw Blade Sharpening Machine, year of manufacture 1985 Gkjdpfozl N Irsx Akasb Grinding wheel diameter: 200 mm Grinding wheel bore diameter: 25 mm Maximum tooth pitch: 50 mm Maximum tooth height: 25 mm Grinding angle: 0-30 degrees Maximum blade height: 190 mm Minimum blade length: 900 mm Motor power: 0.65 kW Feed motor: 0.12 kW Supply voltage: 400 V Overall dimensions: 251 x 90 x 163 cm Weight: 530 kg Immediately available - fully functional Location: Austria, near St. Pölten

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Gkedpfxeznc S Ae Akaeb Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: new, Brand new machine No. 1 available for immediate delivery!! Gjdpfxsfibfgs Akajkb “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: Gksdpfx Aksfibfaeasb 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Gksdpfx Akefh R Tueaeb Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Vise, jaw length: 200 mm Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Gkjdpfx Aksfibd Teaob Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Worktable height: 760 mm. Machine weight: 820 kg.

Condition: new, NEBES TM 275 band saw – 400 V Three-phase NEW “CE” Induction motor Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tension gauge Front controls and two cutting speeds Gjdpsh Nm Ncofx Akajkb Switch for deactivating the cooling pump Blade guide with carbide sliding blocks (H.M.) Round stock cutting 0°: 220 mm Square stock cutting 0°: 200 x 200 mm Flat stock cutting 0°: 230 x 185 mm Round stock cutting 45°: 150 mm Square stock cutting 45°: 150 x 150 mm Flat stock cutting 45°: 150 x 200 mm Round stock cutting 60°: 90 mm Square stock cutting 60°: 90 x 90 mm Flat stock cutting 60°: 90 x 120 mm HP 1.3 Voltage 400 V Blade dimensions 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Gjdpfx Akji Ezq Doajkb Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor, and the special gearbox, complete with a bronze gear, features a hardened and ground worm gear. Appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable tungsten carbide inserts. Gjdpfxjfh R Tye Akajkb Using an electromechanical microswitch control, the bandsaw can be tensioned during blade rotation. Equipped with a safety device to prevent accidents on the flywheel cover and the blade, the machine is completed by a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor 2. lowers the saw frame for cutting 3. the saw frame returns to its starting position 4. stops the bandsaw motor 5. opens the vice Manual cutting option available. Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range: 45° left to 60° right Stop for cuts of the same size: Adjustable Electric pump for bandsaw cooling: 0.06 kW

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Gkodpfjzntwpox Akajb Grinding wheel diameter 150 mm, lots of accessories good, well-maintained condition Operating manual is available

Year of construction: 2006, condition: new, I sell 12 sets of new saw blades suitable for HOLZMA panel beam saw machines. Main saw blade FABA 600 x 5,8 / 4,0 x 60 Z 72 Scoring saw blade AKE 26 200 45H 200 x 4,8 - 5,8 x 45 Z=36 Gsdpfx Asg Dvutjkaskb Price totally 1000 Euro. Available immediately.

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Gsdszdkbkjpfx Akajkb Type Hydromat. Also ideal as a spare parts machine.

Condition: reconditioned (used), functionality: fully functional, Refurbished sharpening machine for carbide-tipped circular saw blades. Gkodpfx Aezmhd Uskasb Blade diameter up to 600 mm. Hydraulically controlled. Equipped with a cooling system, pump, and tank.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for circular saws with carbide inserts. Gkjdpfx Aozl Snuokaob Technically inspected. Technical data in the PDF.

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6560308, Refurbished Kirschner LK 700 soldering unit. Gksdozltitjpfx Akajb Machine for fully automatic soldering of carbide/PCD teeth onto circular saw bodies. All relevant attachments are NEW and can be documented with an invoice. The machine can currently be inspected while powered on.

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm Gsdpfsilfp Njx Akajkb cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m - Circular saw - semiautomatic - hydraulic

Condition: used, Year of construction: 1980, Technical details: Gjdpfx Aju Ng I Ejkaokb rpm spindle (continous): 2000 - 2500 U/min double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Condition: used, Technical details: grinding wheel diameter: 240 mm Godpfx Aeu Ng Edskaokb saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically saw blade continue to move automatically grinding wheel diameter: max.: 240 mm driving motor for feed (0,37 KW) *

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Godpfxswrb U Te Akajkb

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: AB141760, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting width (max.): 1,500 mm, cutting width at rip fence: 1,500 mm, sliding table length: 3,200 mm, Equipment: scorer, SCM sliding table saw, model SI 400 E Gsdpfx Aketwp Epsaekb Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit manual adjustment electric height adjustment electric swivel with siko display Suction connection 1x100mm 1x120mm

Condition: good (used), Year of construction: 2000, The machine is being sold on behalf of a customer and can be inspected under power. Machine location: Czech Republic (Brno) Gedpjylmlisfx Akaskb Band saw automatic Behringer HBP 430A Year of manufacture: 2000 Saw band dimensions: 5800x54x1.3 mm Working area: round 430 mm / flat 430 x 430 mm Smallest material dimension: 15x10x15 mm Shortest cut length: 8 mm Cutting speed: 17 – 110 m/min Saw drive motor power: 7.5 kW Connected load: 11 kW Dimensions (LxWxH): 410 x 230 x 210 cm Weight: approx. 3400 kg

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34. Gksdpfx Aey Nuhnjkaeb

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm Gkodpfx Aehwrp Rokasb Minimum workpiece length: 250 mm Units: 4 1. Saw cutting unit, Random System: Saw cutting head 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2800 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 1500 kg

Year of construction: 2025, condition: new, functionality: fully functional, The UMG-119.17 rough log splitting machine is designed to cut 2.5 meter long logs in half. The logs are fed into the machine perpendicular to the direction of movement, which ensures high cutting performance, 20 cuts per minute. Gkodpfx Aewd Nu Eokaeb

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Gkedpfx Ast Uk Rmjkasb