Used Ruhle Gfr 550 for sale (2,685)

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm Bwjdpfx Abov Rrq Ds Ejn x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 19,995 h, load capacity: 1,300 kg, lifting height: 5,500 mm, free lift: 1,895 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,076 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift Load center: 500 mm Fork width: 100 mm Fork thickness: 35 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Bwjdpfx Ajw Hicnjb Esn Mast type: Triplex Technical condition: good Front tire type: superelastic Front tire size: 18x7-8 Front tire condition: 60 - 80% Rear tire type: superelastic Rear tire size: 140/55-9 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Northbatt Battery year: 2025 Battery condition: New Sideshift, 4th valve, front work lights,

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) Bsdpoyud S Eefx Ab Eswn - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Minimum quantity spraying device Bsdjucpqtopfx Ab Eown Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: used, Year of construction: 2014, operating hours: 7,700 h, Equipment: all wheel drive, JCB 550-80 WM Year of manufacture: 2014 7,700 hours 4x4 all-wheel drive Bodsytl Ilspfx Ab Eewn Lifting capacity: 5 tons Lifting height: 8 m Engine: 93 kW / 127 hp Weight: 11,250 kg German machine Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... ... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 783802 Drivetrain Drive: Wheel Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Continental Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information Bwjdpfetr H Tvox Ab Ejn

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 783802 Drivetrain Drive: Wheel Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Continental Carrier engine: - Bwjdpfxotvlphj Ab Eon Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 5,39,000 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro4, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mercedes-Benz Integro O 550 Many seats Vehicle with minor optical imperfections * MB engine 220 kW, Euro 4 * ZF automatic transmission * ABS, ASR * Automatic climate control * Webasto auxiliary heater with pre-selection function * 55+1+1 high-back seats with seatbelts * 35 standing places * Door 2, double width * Radio, CD, MP3, microphone * Matrix LED lighting on 3 sides with control unit * Retarder * Fog lights * Electrically adjustable and heated exterior mirrors * Driver's seat with air suspension, 3 air cushions, rotatable * 2 electric sunroofs Bodpfjzax Ufjx Ab Ejwn * Luggage compartment with lighting * Night lighting * School bus mode * Stop request brake * Stop request buttons * Grab rails * Wheel covers * 100 km/h approved * Refrigerator, overhead storage compartment All information is provided without guarantee. Inspection possible at any time by prior appointment! Customers who are viewing this ad on Truckscout, please request additional pictures by email, as this portal is unfortunately limited to 15 images! Further information: also available on WhatsApp. Information in Polish: WhatsApp. Your French-speaking contact: Georges Spengelin.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting length (max.): 1,00,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a dual miter saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all miter angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. Connection to window construction software (orgadata / Unilink / Wictop... etc.) is possible. The machine features the following equipment: - Industrial PC - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function Bedpfszav U Njx Ab Ejwn - Overlength cutting - Crosscut - Automatic cutting - Connection to external software possible (Orgadata, Unilink, Wiktop... etc.)

Condition: used, mileage: 2,80,425 km, power: 177 kW (240.65 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 7,600 kg, maximum load weight: 4,400 kg, overall weight: 12,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 35 m³, loading space length: 6,421 mm, loading space width: 2,470 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, differential lock, onboard computer, tail-lift, traction control, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why our listings fundamentally display the export price, as this remains independent of the location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is updated regularly. This information is intended as non-binding, general information and does not replace detailed, individualized advice for your purchase decision. Only the provisions contained in the purchase contract are binding. Subject to changes, errors, typographical errors, and prior sale. Bedpfxsxlq Sls Ab Eown Our general terms and conditions exclusively apply. Languages - We speak English - On parle français - نحن نتكلم العربية - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: new, Roller conveyor length 6000 mm Roller conveyor width 550 mm Bwodpfx Aey H N I Rsb Ejn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 443 h, Format 4 Panel Saw Kappa 550 e-motion - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scoring unit operation indicator - Crosscut fence 3200 mm, swivels 90°–45°, with 2 flip stops - Outrigger table 1250 x 650 mm - “X-Roll” sliding table, cutting length 3200 mm, mitre fence shoe - Electrically positioned rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard, hood for 90° cuts and hood for angle cuts, both height adjustable and can be swung out of the working area - e-motion control system with 15" color touchscreen, operating panel at eye level. USB interface and network connection prepared, adjustable & swing-away from the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Electrically positioned height & angle adjustment 0°–46° - Circular saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg - Scoring unit operation indicator (duplicate in original) - Total operating hours: 443.47 h - Including many as-new saw blades and groove cutter blade Price ex location Bwodpfsw Tfahex Ab Esn Transport available at additional cost!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 550 mm, total length: 7,500 mm, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, saw blade bore: 32 mm, Emmegi Twin 550 double mitre saw for aluminium and PVC. The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor from 45° (internal) to 22°30’ (external) with a precision of 240 positions per degree. The machine features the following accessories: Bwedpfx Abszak Iqo Eon -Preparation for a label printer, which enables labelling and assignment to the corresponding order -Retractable material support -Support for long profiles (roller conveyor) -Industrial PC with Windows Embedded -Additional tensioner on the roller conveyor -Pro software package -Overlength cut -Cross cut -Shortcut -Automatic cut -Connection to window construction software (orgadata / Unilink / Wictop...etc) possible Well-suited for precise and industrial processing of profiles in window and door manufacturing.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,324 h, load capacity: 5,000 kg, lifting height: 4,425 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Bsdsy Rbcnspfx Ab Eown ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Refurbished without warranty Technical condition: Very good Front tire type: Superelastic Front tire condition: New Rear tire type: Superelastic Rear tire condition: New Description: Price includes new UVV inspection and service, very good paintwork, 4x nearly new SE tires, sideshift, 3rd valve, rear and front work lights, roof cover, full free lift, CE certificate.

Condition: used, functionality: fully functional, machine/vehicle number: FN411482, Year of construction: 2011, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN411482 Bjdpfsy U A Iyox Ab Eown Load center: 500 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Side shifter, 3rd valve, windshield, full cabin, interior mirror, windshield wiper

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine was serviced annually under a maintenance contract with Okuma. Bwedjy Uhfkopfx Ab Een Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005, Control system: OSP-E 100 L / Expansion Kit “M” Kit One Touch IGF Milling spindle carriage X/Y/Z/B, Counter spindle W-axis, Main spindle with C-axis, Counter spindle with C-axis, Turret carriage below X/Z axis, Max. turning diameter: 720 mm, Turning length: 2,000 mm, Distance between tailstock center and spindle center: 2,505 mm, Y-axis: 250 mm / +/- 125 mm, Main spindle speed: up to 3,500 rpm, Spindle power: 30 kW Turret below: 12-station without driven tool stations, Nco Dmnbyeyt Nvtoujt Turret below with steady rest, therefore only 9 stations instead of 12, Self-centering steady rest: 35 - 240 mm, Milling spindle: infinitely variable B-axis 0.001°, Magazine: 80-station, Mount: HSK 100, New Forkhart three-jaw chuck Ø 400 mm, value 12,000 €, Counter spindle without chuck, currently with arbors / delivery without arbors, Enlarged main spindle: 110 mm Ø 150/110 mm, Spindle nose: Size 11, 2-stage clamping pressure, Counter spindle as a hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Additional measuring system for Y-axis, Tool length: 450 mm instead of 350 mm, Door automation for both doors, Chip conveyor, Gravity belt filter with clean tank 900 liters, Supply pump, frequency-controlled up to 20 bar, The machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable carrier for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. Work performed by Okuma. Machine cleaned. Sheets and covers removed. 8th axis removed. Travel stand removed and lifted out of the machine. ATC removed and lifted out of the machine. All linear guides removed. Mounting surfaces of the Z-axis cleaned. New linear guide for Z-axis including shoes installed and tightened with the specified torques. New ball screw for Z-axis including bearing mounted and installed. Base plate of the travel stand installed and tightened with the specified torques or screwed onto the shoes. Lubrication lines connected. ATC including attachments installed and connected. New linear guides YA and XA installed and tightened with the corresponding torques. New ball screw YA including bearing installed. Travel stand installed and lubrication lines connected. Base plate XA placed and aligned. 8th axis placed and aligned. H1 turret installed - Install drive motor for the 8th axis - Assembly of 8th axis + new H1 and adjust geometry - Functional test of 8th axis and H1 - Run-in program for B-axis approx. 12 hours, then drain old oil from the 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various sheets - Install chuck - Adjust zero points - Check tool change

Condition: used, Roller conveyors with chains pull 90° RA1846 Bwedpfxek Abg Do Ab Een Type: Transnorm 3300-600-550 Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 4360-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4360 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Bwsdpsk Abd Nsfx Ab Ejn We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt Powered roller conveyors roller conveyor 6000-610-550 RA1909 Make: Gebhardt Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 610 mm length: 600 mm Rolls diameter: 50 mm Roller distance 100 mm Overall height frame: 130 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Bsdpfxek Abk Is Ab Eswn Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF50°-740-550 IR700 RA1948 Technical data: Conveying length middle radius (NL): 851 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 200 mm Inner radius (IR): 700 mm Conveying angle: 50° degrees support feet: optionally available Conveying speed (V m/s): 0,045-1,3m/s Drive: SEW gear motor Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports: Side guide one- and both sideds Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Bwedpfx Aok Abmqjb Esn We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1997, Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm height including motor (MH): 480 mm Bwedpfxok Abtlo Ab Eon Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt:KT58, will be changed Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg If you need other dimensions or individual, professional advice, please contact us. Simply contact us by phone or mail or use our filters on our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Bwedpfok Aa Unox Ab Een Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Bwedpfx Abek Abaze Esn Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm Bjdek Abd Tepfx Ab Ejwn support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Bjdpok Abfbsfx Ab Ejwn Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics