Used Saspi Saspiflat Die Thread Rolling Machine for sale (70,454)

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Dsdpfx Aeuz If Nof Ajci Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Dsdjh A S Htepfx Af Aeci Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: new, Thread rolling machine Dsdpoyz Th Rofx Af Ajci

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Machinetype: thread rolling machine for nails Make: ENKOTEC Dcjdpfowm Rtzex Af Aoi Type: TA01 Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Location: Germany

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 063/09, thread length: 50 mm, workpiece diameter (max.): 6 mm, SMART MACHINERY NG S-DD Thread Rolling Machine Fully operational, currently in production. Year: 2009 Incoterm: EXW Calolziocorte (LC) Dsdpfx Afoyycr Ns Aoci The machine automatically sets up for stroke change. The NG S-DD thread rolling machine is equipped for changing the ram stroke depending on the length of the comb used. Minimum pass-through diameter: 1 mm. Maximum pass-through diameter: 6 mm. Maximum threaded length: 50 mm. Maximum rivet length: 80 mm. Maximum output: 700 pcs/min. Main motor power: 13.9 kW Installed electric power: 16 kW

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Dsdpfx Afswiu Afo Aeci

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system EW Menn including vibratory feeder, Skako, and slide conveyor Dedewkqvqopfx Af Ajci

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg Dcjdpfxsvyyyxe Af Aji

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12-562, overall weight: 900 kg, workpiece diameter (max.): 40 mm, spindle diameter: 54 mm, type of input current: three-phase, roll diameter: 150 mm, spindle speed (max.): 80 rpm, spindle speed (min.): 10 rpm, total height: 2,150 mm, total length: 1,200 mm, total width: 800 mm, roll width: 80 mm, year of last overhaul: 2026, Equipment: documentation/manual, We offer this factory-refurbished thread rolling machine RWT 12X FR, year of manufacture 2013. Directly from the manufacturer! Machine type: RWT 12X FR Rolling force: 12 t Power: 5.5 kW Year of manufacture: 2013 PLC: Siemens S7-313c HMI: Siemens OP7 Frequency inverter: Siemens Micromaster 440 Speed: 10–80 rpm, stepless adjustment Max. tool width: 80 mm Rolling spindle diameter: 54 mm Rolling die diameter: max. 150 mm Suitable for plunge and through-feed rolling. Condition: very good, used, workshop-refurbished by the manufacturer If you have any questions or need further information, please write us a message or call us. Dcodpfx Aoydkb Sef Aoi

Condition: good (used), Maximum pressure 25tn • 69 and 85mm axles • Machine in very good condition, completely revised Dcedogqumpspfx Af Aei

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: NT2012, ESCOFIER MACHINE, EXCELLENT CONDITION, VERY LITTLE USED. 12-TON MACHINE. POSSIBILITY TO SEE IT OPERATING IN OUR WORKSHOP. Dcodpfx Aoycq Ebjf Aei

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dcsdpfsymlx Djx Af Aji Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Dedpfev Rb Apox Af Aoci Download PDF file for photographs

Condition: used, Year of construction: 1996, Thread rolling machine Ingramatic RP21 RV With sems unit Flat dies Year: 1996 Diameter : max 8 mm Shaft length under head: 80 mm Max. thread length: 58 mm Dcodpfx Afeylw N Ss Aoi

Condition: used, Year of construction: 1994, Thread Rolling Machine EWMenn GW63 Flat dies Year: 1994 Djdeylw E Topfx Af Aeci Diameter range: max 8 mm Shaft length under head: 80 mm Max. thread length: 58 mm

Condition: used, Thead Roller TLM RP8 TLM TORTONA Year: 1995 Diameter range: 3-8 mm Shaft length under head: 90 mm Max. thread length: 52 mm Dies size:130/115x54 Dodpfxjx Aqprs Af Ajci

Condition: new, THREAD ROLLING ROLLERS Djdpfjzdv Trex Af Aeci

Condition: good (used), Ingramatic RP1 Dcodshrdnkjpfx Af Aei Max diameter: M6 Max. thread length: 42mm Max. shank length: 75mm Year: 80's

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Djdpoy Ugtasfx Af Aoci Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Djdpfx Aeziytmjf Asci Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal Dodpfxsyvvpyo Af Aoci - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel Dcedpfxouuilpj Af Aoi It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm Height of dough exit: 640 mm Electrical power: 0.55 kW Weight of machine: 250 kg Dough centering flaps: On request

Condition: new, Bread maker and rolling pin maker Dimensions: 88x88x120 Dcedpfxsuuigte Af Asi Voltage: 220-400 V Electric power: 0,55 kW Dough weight: 20-1000g

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Djdpet Dx U Ssfx Af Ajci Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: used, functionality: unexamined, Year of construction: 1963, machine/vehicle number: 971W01002, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 400 mm, side roll diameter: 400 mm, roller length: 3,000 mm, sheet thickness (max.): 15 mm, Used HAEUSLER KRMA 3000 x 15 rolling machine for sale. Manufacturer: CHR. HAEUSLER AG, Switzerland. Working width 3000 mm, nominal thickness 15 mm, 380 V. Serial number 971W01002. The nameplate indicates the year 1963, as well as a revision/CE marking from 2003. The machine is designed for rolling and bending sheet steel. It is sold in its current condition, and on-site inspection is recommended. The machine is also equipped for bending profiles. Dcsdpfx Aozil Hfjf Asi