Used Sawa F30/50 for sale (34,850)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 15,004 h, load capacity: 5,000 kg, lifting height: 3,050 mm, fuel type: electric, mast type: telescopic, construction height: 2,320 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 2,000 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 355/50 - 15, rear tire type: superelastic tires (black), rear tire size: 21 x 8 - 9, overall weight: 7,450 kg, total height: 2,320 mm, total length: 3,100 mm, total width: 1,400 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-50 / 600 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 3.050 mm Closed height: 2.320 mm Mast: Standard (2W305) Fork length: 2.000 mm Fork carriage: 3A Drive: Elektro 80V Battery: 80 V/ 930 Ah (2016) Charger: 80 V - not tested Tyres: Superelastik SE 355/50 - 15 (10%) / 21 x 8 - 9 (0%) Service weight: 7.450 kg Length: 3.100 mm Width: 1.400 mm Year of manufacture: 2013 Operating hours: 15.004 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Full cabin ATTACHMENTS Iodpjz Aqh Ujfx Aiyobb Sideshift, Fork positioner Internal no.: 1309204 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H Isdpfjyzr Nmsx Aiyobb • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, Kemper SPL 50 spiral mixer Dough capacity: 80 kg Flour capacity: 50 kg Timer with two clocks Iodpoz A Siwofx Aiysbb Two speed settings Bowl rotates clockwise/counterclockwise Mobile with locking mechanism

Condition: used, Planetary mixer Rego P 50 Condition: used, functional Robust and precise planetary, mixing, and kneading machine Iedpfx Ajz A Suaoiyebb Stepless speed control via lever Height adjustment via hand crank Timer Stainless steel safety guard with safety sensor Bowl lighting Includes 50-liter bowl and kneading tool

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp Ijdjzmt Ufepfx Aiyebb 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust combined jointer and thicknesser, SCM Type 2250. The machine impresses with its heavy-duty, solid construction, a planing width of 500 mm, and long jointer tables. The fold-up jointer tables allow for quick switching between jointing and thicknessing. Technical data: +Manufacturer: SCM +Type: 2250 +Planing width: approx. 500 mm +Total length of jointer tables: approx. 2,200 mm +Maximum thicknessing height: approx. 235 mm +Minimum thicknessing height: approx. 3 mm +Maximum material removal in thicknessing: approx. 8 mm +4-knife cutterhead +Cutterhead speed: approx. 4,500–5,000 rpm +Motor power: 5.5 kW +Two feed speeds: approx. 7.5 and 15 m/min +Fold-up jointer tables +Swiveling fence Ibjdpezz Nt Hefx Aiyeb +Automatic workpiece feed in thicknessing +Dust extraction connection: 150 mm +Weight: approx. 890 kg +Space requirement: approx. 2,200 × 1,350 × 1,100 mm Scope of supply: +Operating manual +Parts list +Setting gauge +Replacement knives The machine is in used condition. Inspection and a test run are possible by prior appointment. Loading and transport can be arranged upon request. Location: 39340 Haldensleben Price: €4,350 net

Condition: used, functionality: fully functional, Used Drilling and Milling Machine FAMUP TCS 50 Iedpfx Aijzx S H Doysbb

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 3,048 mm, feed length Y-axis: 813 mm, feed length Z-axis: 762 mm, controller model: NGC, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, 50-taper spindle with a 2-speed gearbox. Customizable to meet your specific requirements. Iodpfx Aszr U S Njiysbb Ideal for working with tougher materials and larger-diameter cutting tools.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 9443, total height: 3,160 mm, ram adjustment: 64 mm, total width: 1,300 mm, total length: 2,470 mm, conveyor belt width: 160 mm, pressing force: 50 t, control cabinet height: 1,100 mm, control cabinet length: 1,250 mm, control cabinet width: 400 mm, type of input current: AC, stroke adjustment: 1,651 mm, clearance between the columns: 250 mm, working width: 950 mm, input voltage: 380 V, overall weight: 8,600 kg, control voltage: 24 V, conveyor belt thickness: 4 mm, pressure: 5 bar, compressed air connection: 10 bar, input frequency: 50 Hz, punching force: 50 t, BRUDERER BSTA 50HL (500 kN, year of manufacture 1990, order no. 9443) HIGH-PERFORMANCE STAMPING PRESS 100-1000 SPM Technical data Ibjdpfx Aozq Sdyjiyeb Press manufacturer: BRUDERER AG, Frasnacht, Switzerland Machine model: BSTA 50 HL Serial/order number: Order no. 9443 Year of manufacture: 1990 Total weight approx.: 8,700 kg Soundproof cabin: W 3,460 × L 2,331 × H 3,910 mm (optional extra) Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Support plate – width × depth: 940 × 650 mm Base plate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip feed width: 250 mm Feeder: BBV 195 - 85 Feed angle: 90 degrees Max. strip thickness: 4 mm, strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 380 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder): approx. 2,471 mm Press depth: approx. 1,302 mm Press height: approx. 3,165 mm Price including transport in Europe Original technical documentation and circuit diagrams Optional: Sound-insulating safety cabin/enclosure

Condition: good (used), Year of construction: 2011, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Ibsdpszpd Etjfx Aiyeb

Condition: ready for operation (used), Year of construction: 2018, Universal Machine Center 5 axis simultaneous DMG DMU 50 Year 2018 Travel X500 Y450 Z400mm Heidehhain iTNC530 Swivel Rotary Table Ø630x500mm NC B axis -5 to 110 degree NC C axis 360 degree x 0.001 Spindle 18,000 rpm Ibjdpfxszvlglj Aiyob ATC 16, SK40 taper Direct Measuring X,Y & Z axis Electronic Handwheel

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Year of manufacture: 1998 Iodpfx Aozvyg Hjiyebb

Condition: used, functionality: fully functional, machine/vehicle number: 516029002148, Year of construction: 1999, operating hours: 6,424 h, load capacity: 5,000 kg, lifting height: 2,800 mm, free lift: 1,580 mm, fuel type: electric, mast type: duplex, empty load weight: 6,828 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: 516029002148 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire condition: 40 - 60% Rear tire condition: 80 - 100% Ibodpfx Aioz Dcm Aoysb Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: SBS Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: German Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 2,800 mm Mast: Duplex Free lift: 1,580 mm Version: Suitable for containers Battery: 80 V / 930 Ah, year 2019, manufacturer SBS Battery condition: 80–100 % Equipment: Side shifter, 3rd and 4th hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 2,800 mm Mast: Duplex Free lift: 1,580 mm Version: Container suitable Battery: 80 V / 930 Ah, year 2019, manufactured by SBS Battery condition: 80–100% Equipment: Side shift, third and fourth hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shifter, 3rd valve, 4th valve, rear work light, front work light, load backrest.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Ibodpfx Aoy Anifoiyeb

Condition: used, Year of construction: 1995, Planetary mixer Rego P 50 Iedpfsz A Savox Aiyebb Robust and precise planetary, mixing, and kneading machine Stepless speed control via lever Height adjustment via hand crank Timer Stainless steel safety guard with safety sensor LED bowl illumination Includes 50-liter bowl and kneading hook

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, CNC Lathe TAKISAWA TMM 250 – Twin-Spindle, Y-Axis, Live Tooling Manufacturer: TAKISAWA Model: TMM 250 Control: Fanuc 180is-TB Year of manufacture: 2004 5. MACHINE SPECIFICATIONS Capacities Workpiece turning diameter: 780 mm Standard turning diameter: 220 mm Max. turning diameter: 350 mm Max. turning length: 800 / 200 mm (flange) Distance between spindle ends: 1130 mm Bar work capacity: 76.2 / 50.8 mm (left/right spindle) Travel X-axis travel (upper turret): 265 mm Y-axis travel (upper turret): ±50 mm Z-axis travel (upper turret): 760 mm A-axis travel (right spindle side): 800 mm X-axis travel (lower turret): 228 mm Z-axis travel (lower turret): 760 mm Spindles Number of spindles: 2 Spindle speed: 4,000 rpm (left, right) Number of gear stages: 1 Min. spindle index angle: 0.001° (Cs-axis) Spindle nose size: JIS A₂-8 / A₂-6 (left/right spindle) Ibedeyx S Iqjpfx Aiyjb Taper bore (type, no.): 90 × 1/20 taper // 75 × 1/20 taper (left/right spindle) Spindle bearing inner diameter: 120 / 100 mm (left/right spindle) Spindle bore diameter: 86 / 63 mm (left/right spindle) Machine Description High-performance CNC lathe with twin spindles and two turrets. The machine enables simultaneous machining with both turrets on one spindle (4-axis machining), making it ideal for complex turning/milling operations. Highlights - 2 spindles with C-axis - 2 turrets (VDI 40) - Y-axis on upper turret (±50 mm) - Live tooling - FANUC CNC control (32 bit) - Touchscreen operation - Double holders possible (up to 60 tool positions) Technical Data Left spindle: Power: 15 / 22 kW Torque: max. 433 Nm Speed: up to 4,000 rpm Spindle bore: 86 mm Bar capacity: 76 mm Right spindle: Power: 11 / 18.5 kW Torque: max. 326 Nm Speed: up to 4,000 rpm Spindle bore: 63 mm Bar capacity: 51 mm Tooling: 2 turrets with 15 positions each Max. 15 live tools per turret Tool drive power: 3.7 / 5.5 kW Tool speed: up to 4,000 rpm Equipment - FANUC AC servo drives - 10.4" colour LCD with touchscreen - Rigid tapping - Automatic central lubrication - Coolant pressure: 4 bar (optional 6 bar high-pressure pumps) - Fully enclosed machine housing with work area lighting - CE compliant Additional Equipment Chucks: Left: Schunk HSL 315 Right: SMW BBM 250 Automatic work area door (pneumatic) Chip conveyor (hinged belt, right) High-pressure coolant pumps (6 bar each turret) Manual tool setter 3-colour signal lamp Machining Data Turning length: 760 / 200 mm Tool torque: max. 35 Nm Condition Used, fully functional – well-maintained industrial machine.

Condition: used, functionality: fully functional, Coolant system manufactured by JUNG, type HF 50. Iedpozzpxvjfx Aiyebb

Condition: repair required (used), functionality: not functional, Pictures show : 2-spindle drilling head , pneumatic clamping device , hydraulic feed device . Ijdpez Ad N Eefx Aiyebb Technical data : Continuous drilling capacity 50 mm Normal drilling capacity 65 mm Spindle motor , pole-switchable 3 / 5 kW 4 infinitely variable speed ranges Gear stage 1 50 - 375 and 100 - 750 rpm Gear stage 2 100 - 750 and 200 - 1500 rpm Distance from spindle nose to table approx. 800 mm Spindle stroke 200 mm Column diameter 160 mm Projection 325 mm Entire table 650 x 500 mm Height approx. 2.1 m Normal weight approx. 0.7 to . Equipment and scope of delivery : - Table clamping from the front - Coolant device - Electric cabinet - without table height adjustment - Hydraulic feed device - the hydraulic unit is missing ! (drill feed can be operated manually via a cross lever)

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm Ibodpfxjzyu Ums Aiyjb control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Condition: like new (used), - Capacity: 1600 x 50 tons - NC control (touchscreen) - 2 hydraulic cylinders Ibedpezfv Ufefx Aiysb - Foot pedal operation - Light curtain safety system - Emergency stop - Lighting - Documentation - 400V

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Isdpfx Aoxwxc Ajiyobb Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Ibjdpfx Ajzt Skxsiyeb

Condition: used, functionality: fully functional, Used dryer 46000 LT/MIN Dominick Hunter CRD2760 (Parker). Ibsdpfx Aiszh Elrsysb

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,145 mm, total length: 3,100 mm, total height: 3,390 mm, table width: 986 mm, table length: 1,820 mm, overall weight: 4,200 kg, Equipment: documentation/manual, Morse 5 taper in the spindle, max. drilling capacity in steel Ø 50 mm, arm length 1250 mm, base clamping surface 1820 x 986 mm, max. Ø boring capacity in steel – without guide: 120 mm, with guide: 200 mm, spindle stroke: 310 mm, vertical arm travel 750 mm, spindle speed: 16 steps, range: 28-2500 rpm, feed rate 0.05 - 2 mm/min, 16 steps, spindle motor power at 1430 rpm: 4 kW, total power consumption 6 kVA, machine dimensions L x W x H: 3100 x 1145 x 3390 mm, machine weight 4200 kg, the machine can be fully tested in our warehouse in Přerov upon agreement. Ijdpfxozzfbae Aiyebb

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Ibedpoz Dfr Ujfx Aiyeb Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air.