Used Schmedt Fälzelgerät / Back Lining Machine for sale (69,369)

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 PAPER MACHINE + STOCK PREPARATION / DEINKING PLANT + GOEBEL U16M !contact for full details and photos! Package sale of an integrated paper production installation in Hainsberg, Germany. The package includes the PM 5 paper machine, its associated stock preparation and deinking plant, and a Goebel U16M roll slitter rewinder. PM 5 was originally built in 1985 and modernised several times. Main sections: approach-flow system – PAMA; headbox – Voith; Fourdrinier section – PAMA; top-wire former – Valmet; press section – PAMA; dryer sections – PAMA; SpeedFlow system – Voith; after-dryer section, calender and Pope reel – PAMA. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion/modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications: • Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm • Maximum speed: up to 600 m/min • Maximum gross capacity: up to 150 tonnes/day • Basis-weight range: approx. 45–130 g/m² • Grades produced include office, copy, writing, printing, envelope and newsprint papers • Installed electrical power: approx. 2.5 MW • Steam consumption: up to approx. 16 tonnes/hour Stock preparation/deinking plant: • Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions Fedpfx Apjz Hvmhj Depn • Essential components listed in the available technical documentation are reported to remain installed on site • Older Siemens S5 and Teleperm control and automation system Goebel U16M: built in 2005, machine no. 053-9031. Working width 2,800 mm; maximum speed 2,000 m/min; maximum unwind diameter 2,000 mm; maximum rewind diameter 1,500 mm; minimum cutting width 150 mm. Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator. Operating status: Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults known. None of the equipment has been restarted or tested under production conditions since shutdown. Current functionality has not been verified. Fampa Roller – offered as is (brake-control system defective; out of operation since end of 2024) RPM LAMB – offered as remaining equipment/components (incomplete, partly dismantled; out of operation since 2025) Maximum capacities depend on paper grade, raw material and operating conditions. Inspection by appointment. Price on request.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Fpsdpfx Apex D Tbmo Djn YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Fpedpow I Um Hefx Ap Den Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Fjdpozb A Rgjfx Ap Dspn

Condition: good (used), Year of construction: 1983, Pitch 32 mm Motor output 1,8 kW Weight 240 kg Fpodpfozfqk Ijx Ap Dsn Number of boring spindles 21 St.

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm Fsded Supgspfx Ap Djpn machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90L0865829G_00, overall weight: 1,000 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, The CMS Proxima is an automatic horizontal edging machine (dry edging machine) from CMS Glass Technology for processing glass edges. Processing length: The maximum working length per cycle is approximately 2.6 to 2.7 meters (larger panes can be accommodated). Glass thickness: Can process glass from approximately 4 to 19 mm. Fjdpfx Ajz E Axzep Dspn It can be operated either as a stand-alone unit (with a simple setup table) or in combination with tilting float cutting tables or laminated safety glass (VSG) cutting tables.

Condition: used, 1.0 piece. Nozzle for injection into the parting line. Fsdpfx Apjzxtcyo Depn Manufacturer: ARBURG For machine models 270.

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Fodpfjif Sg Sex Ap Djpn Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: ready for operation (used), Year of construction: 2006, Canol make up pastry line Canolino 5.2 highly specified make-up line for the production of puff pastry, yeast dough and Danish pastry. This Canol Canolino 5.2 is equipped with an independent dough calibrator, ensuring precise dough thickness and consistent product quality. Reliable industrial line suitable for a wide range of bakery products. Fpjdpfx Apezd Tc Dj Djn year of build 2006 length overall: 678 cm conveyor belt width: 650 mm independent dough calibrator cutting station dosing machine with 4 dosing nozzles roll winder guillotine cutting knives, folding shoes etc. pictures BEFORE cleaning

Condition: used, Year of construction: 1999, Rondo Doge Rondolino make up pastry line year of build 1999 table length overall 380cm conveyor belt width 635mm Fpodpfexvx Tfjx Ap Don cutting station filling depositor guillotine ZGM635.A pictures BEFORE cleaning

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: SCHTEC WM740 four-head automatic welding machine, rarely used and in like-new condition, including WM620 corner cleaning automaton, cooling station, and automatic turning arm. If purchased together with the SMC350 machining center and Pressta two-head automatic screwing unit, which are also listed in your advertisements, the package price is EUR 180,000. For further information, please feel free to contact me. Fodpfjyzimcex Ap Depn

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm Fpsdpfx Aev Hm A Tsp Den -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices Fedpfx Apew I Unwj Dspn 1 foot switch Availability: short term Location: Röllbach

Condition: used, Year of construction: 1975, used hole line drilling machine Model Scheer DB 20 table size 1400 x 630 mm 1 drill beam a 21-spindle, 32 mm pitch height adjustment 40-100 mm Spindle distance max 640 mm, Working length 700 mm per cycle by moving the workpieces max. 2656 mm throat 550 mm Motor 1.8 KW 1 stop rail with immersion stops Weight approx. 240 kg Fpsdpfsri R Hasx Ap Den

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Fpsdsxghngopfx Ap Dsn Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine Fodpfjd Tm Hnjx Ap Djpn -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW Fpodpfxsy Saw Hs Ap Dsn - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL Fpedpfx Apsz Eh Egj Den 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We are offering this very well-maintained Roque packaging line, year of manufacture 2020. Fjdpox Uqn Iofx Ap Dspn This line consists of the following components: - ROQFOLD 1.3 - RFD-1101 (year 2020): Generation 1.3 folding and packaging unit by ROQ - ROQPACK 27X45 - RPK-1062 (year 2020): packaging machine by ROQ - ROQLABEL P&A - RTQ-1038 (year 2020): label printer - ROQBAG 22X40 - RBG-1044 (year 2020): packaging machine for pre-made film bags by ROQ - 2 x outfeed conveyor belts - Labelling software and dongles - Complete operating manuals in German and English If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Fodpfxevwfqqo Ap Dopn

Condition: good (used), functionality: fully functional, Swing type row drilling machine, 19 spindles, pneumatic clamping Fodpfx Aex Rbkljp Dspn

Condition: ready for operation (used), Year of construction: 2021, operating hours: 288 h, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and capping system + rinser, infeed conveyor, and automatic labeling machine from the manufacturer ENOS! The machine is being sold due to a changeover to aluminum cans. The system is fully operational and has been internally maintained according to the manufacturer's instructions. Note: The seller will handle the dismantling of the machine. The buyer is only responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour Bottle format: 33cl long neck, crown cap 26mm With the same diameter of 60.4 mm, various bottles are possible (automatic height adjustment) MACHINE DETAILS Usage: 282,000 bottles filled Operating time: 288 filling hours Fpedpfx Aozh Dtbop Don Input voltage: 400 V Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling machine

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. Fpjdpfx Apjy Uquho Djn The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: excellent (used), Drilling machine for turned components Triade Fpodpfxsyabz Io Ap Djn Number of drilling units: 3 Drilling depth: 100 mm per side