Used Sicmi Pcl 70 A for sale (73,524)

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 12500 € 240 € 150 to fix 150 mm 780 mm 1000 mm 1900 mm 1200 mm 2450 (PSS: 2600) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 Dedexviu Tepfx Adrekr PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00

Condition: excellent (used), Catalogue number 7737 Dkodpfx Aezrnvzjdror TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right Dkodpfjzrpr Dex Adrsr as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-400-70 Year of manufacture: 2010 Serial number: 214269 Djdpfx Adox Eirworokr Control system: Control system: Arburg Selogica Direct Operator panel: operator terminal Control cabinets: complete control and power supply cabinets Clamping unit parameters: Clamping force: 400 kN Injection unit parameters: Screw diameter: 18 mm Part handling system: Manufacturer: ARBURG Type: Multilift Number of axes: 3-axis extraction robot Moulded part transport: Cycle conveyor – length/width: 2,000 × 800 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Dodpex Eirqsfx Adrskr Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: used, functionality: not functional, Year of construction: 2007, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, fork carriage width: 2,100 mm, empty load weight: 10,784 kg, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Standard Technical condition: Used for spare parts Front tire type: Superelastic Front tire size: 355/65-15 Rear tire type: Superelastic Rear tire size: 3.00-15 Description: R70-70 - Forklift for spare parts Full cabin Dksdpfxeza Iy Do Adrjr Forklift for spare parts

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Year of Manufacture: 2018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters For sale is a used Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber with touchscreen control. The testing chamber was developed for professional temperature and climate testing and is ideally suited for environmental simulations, material testing, quality assurance, research, as well as development and stress tests. Technical Data: Type: ClimeEvent C/340/70/5 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 7 K/min Temperature Change Rate (Cooling): approx. 7 K/min Max. Heat Compensation: approx. 3000 W Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Humidity Deviation (Time): ±1 to ±3 % RH Temperature Deviation (Climate Mode): ±0.1 to ±0.3 K Temperature Homogeneity (Climate Mode): ±0.5 to ±1 K Refrigeration System: Refrigerant: R449A / R23 Refrigerant Quantity: 2.50 kg / 0.75 kg Electrical Data: Dksdpfx Adozrwyisrsr Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Dimensions: External Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal Dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: Touchscreen Control Stainless Steel Interior Large Viewing Window Interior Lighting Water-Cooled Version Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Accessories as Shown in Pictures Shipping Data: Shipping Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Shipping Weight: approx. 650 kg Condition: Used Optical condition as shown in pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: • Functional check and replacement of necessary components • Refilling with legally compliant refrigerant if necessary • Leak test with certificate • Documented test run after successful inspection. Availability: upon agreement. Scope of delivery as pictured. Subject to change, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Year of Manufacture: 2018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters Dodpfx Aezrtz Ajdrjkr For sale is a used Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber with touchscreen control. The testing chamber was developed for professional temperature and climate testing and is ideally suited for environmental simulations, material testing, quality assurance, research, as well as development and stress tests. Technical Data: Type: ClimeEvent C/340/70/5 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 7 K/min Temperature Change Rate (Cooling): approx. 7 K/min Max. Heat Compensation: approx. 3000 W Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Humidity Deviation (Time): ±1 to ±3 % RH Temperature Deviation (Climate Mode): ±0.1 to ±0.3 K Temperature Homogeneity (Climate Mode): ±0.5 to ±1 K Refrigeration System: Refrigerant: R449A / R23 Refrigerant Quantity: 2.50 kg / 0.75 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Dimensions: External Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal Dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: Touchscreen Control Stainless Steel Interior Large Viewing Window Interior Lighting Water-Cooled Version Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Accessories as Shown in Pictures Shipping Data: Shipping Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Shipping Weight: approx. 650 kg Condition: Used Optical condition as shown in pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: • Functional check and replacement of necessary components • Refilling with legally compliant refrigerant if necessary • Leak test with certificate • Documented test run after successful inspection. Availability: upon agreement. Scope of delivery as pictured. Subject to change, errors and prior sale.

Condition: good (used), Year of construction: 2008, load capacity: 7,500 kg, Max. tool width: 3300mm Max tool height: 1630mm Table size: 1400x380mm / side Cas27Wn8Iy Load capacity: 15000 kg Dkedpfxeup Aapo Adrsr Turning load capacity: 7000 kg

Year of construction: 2001, condition: good (used), Manufacturer: Zeppelin Silo- und Apparatetechnik GmbH Type: Stainless steel silo Year of manufacture: 2001 Volume: 70 m³ per silo Dkedpfx Aszqkfpedror Material: Stainless steel Filling material: PA/PP granules Bulk density: 0.6 kg/dm³ Silo height: 12,500 mm Silo diameter: 3,000 mm Max. operating overpressure: 45 mbar Permissible underpressure: 5 mbar Max. operating temperature: 50 °C Max. insertion depth: 11,000 mm Wall friction coefficient: 0.3–0.4 Horizontal load ratio λ: 0.5–0.7 Bottom load factor cb: 1.5 Discharge factor eh: 1.2 Bulk material coefficient βG: 0.4 μH: 0.2–0.4 Available quantity: 3 silos

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Dksdpfozp R I Ijx Adrsr delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Dedpszp R Izjfx Adrokr

Condition: used, fuel type: diesel, Year of construction: 2010, 1 DAF XF truck with roll-off tipper / hooklift system for GERGEN JUNG GRK 21/70 Apollo containers Vehicle type: Truck Body type: Truck for on-road transport with roll-off system Manufacturer: DAF Truck Type: AT First registration: 06/02/2010 Mileage: 389,497 Fuel: Diesel Rated power: 375 kW / 510 hp Engine displacement: 12902 Dedpezqa U Tsfx Adrjkr Official license plate: FN AO 9000 TÜV (technical inspection): 12/25 Number of vehicle keys available: 1 General condition: as shown in the pictures and during inspection Equipment: as shown in the pictures and during inspection Available vehicle documents: Vehicle registration certificate I: yes Vehicle registration certificate II: yes Color: as shown in the pictures, during inspection Vehicle ID: XLRAT48MS0E873575 Condition: used

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0704551850, functionality: fully functional, // elumatec AS 70/45 - Speed switching from 12,000 rpm to 6,000 rpm for cutting thin-walled steel profiles // Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Dsdozti Unspfx Adrokr Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg We can ship the machine to your address.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber -70 °C to +180 °C | Year of Manufacture 2018 Description: For sale is a high-quality climate testing chamber from Vötschtechnik GmbH, model ClimeEvent C/340/70/5, year of manufacture 2018. This unit is suitable for demanding temperature and climate tests in laboratories, research institutions, development departments, and industrial quality assurance. Thanks to the large test chamber, the powerful refrigeration unit, and the precise temperature and humidity control, the system is ideal for material, electronics, and long-term testing. The water-cooled design ensures reliable operation even under high power requirements. Technical Data Manufacturer: Vötschtechnik GmbH Model: ClimeEvent C/340/70/5 Type of Equipment: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate: Heating: approx. 7 K/min Cooling: approx. 6.7 K/min Maximum Heat Compensation: approx. 3,000 W Temperature Deviation (over time): ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range: Temperature: +10 °C to +95 °C Humidity: 10 to 98 % RH Dew Point: -3 °C to +94 °C Refrigerant: R449A – 2.50 kg R23 – 0.75 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Design: Water-cooled Dimensions (approx.): External: 1,830 × 900 × 1,890 mm (H × W × D) Internal: 750 × 580 × 765 mm (H × W × D) Weight: approx. 650 kg Equipment: Color touchscreen control Stainless steel test chamber Internal lighting Large viewing window Water-cooled refrigeration unit Side cable entry Multiple shelf levels Ethernet interface USB interface Extensive accessories as shown in the photos Areas of Application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Automotive Aerospace Research & Development Quality assurance Aging and stress tests Condition Used. The unit is in good condition with normal signs of wear and tear, consistent with its age. Scope of Supply: Vötschtechnik ClimeEvent C/340/70/5 Accessories as shown in the pictures Service Dkjdpszquakefx Adror Shipping: Inspection is possible at any time by appointment. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder is possible for an additional charge. Subject to prior sale and errors.

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 33, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x New Iveco Daily vehicles with COC, available for immediate delivery, equipped with GSR systems. 1 x in black 1 x in white We are the representative of Ferqui in Germany. Ferqui is known for its high-quality fiberglass bodies. Ferqui has been building with fiberglass since the late 1960s and is therefore one of the pioneers in this segment. The vehicles have a permissible total weight of 7200 kg and are therefore covered by the Iveco warranty. Iveco C70 chassis with automatic transmission and 210 hp. Air-suspended rear axle, Telma auxiliary brake, LED headlights, auxiliary heater, luxury driver's seat with seat heating. - Iveco Daily - 2 x tour buses on Iveco C70 chassis - Air-suspended rear axle - Telma - Length 8.59 meters, width 2.50 meters, height 3.1 meters Dksdpfx Ajztl Ahodrer - Fiberglass body - Ribbed frame construction made of galvanized steel - Front air conditioning - Webasto air conditioning in the passenger compartment RT 190 = 19 kW (thus dual AC) - Double glazing - Panoramic windshield - Electrically operated front door with recessed entrance - Entrance height at the front, without lowering, maximum 300 mm - Emergency door at the rear - Total capacity for tour bus: 29 (28+1+1) - USB ports at each row of seats in the tour bus - Luggage compartment on the left and right in the tour bus - Fresh air vents at each row of seats with service set - Convector heater - Iveco auxiliary heater with water and timer Tour bus has a 4.2 m3 trunk - Rear trunk - Spare wheel compartment - 2 side trunk compartments - Exterior color: white Price per unit: 169,990.00 euros. Net export possible.

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Dedpfszrnc Iex Adrskr Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: used, Year of construction: 2018, operating hours: 893 h, Description: Self-propelled articulated telescopic work platform on tracks, electric drive or Lombardini (Kohler Comp.) 1-cylinder diesel engine, remote control for operating the tracks. Length: 4,250 mm, width with extended supports: 2,852 mm, own weight: 2,050 kg. Two-part articulated arm + telescopic arm + basket arm, max. working height: 17 m, max. working reach: 7.5 m, turret rotation 330°, max. permissible wind speed 12.5 m/s, hydraulic 4-point outrigger support. Work platform with electro-hydraulic proportional control and hydraulic leveling system, max. payload 200 kg/2 people, CE socket in the basket. Recorded operating hours: 893 h. Dodpfozthbmox Adrjkr John JHT 27.47 transport trailer with access ramp, first registration: 12/2019, permissible total weight: 2,700 kg. For sale to commercial customers only. IN THE EVENT OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations are our general terms and conditions (see legal notice).

Condition: used, maximum load weight: 29,770 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR – Walking Floor 70 cbm, fully equipped First registration: 06/2024 Mileage: 77,648 km Dimensions (L x W x H): 11,560 x 2,480 x 2,360 / 2,566 mm (tapered design) Saddle height: 1,250 to 1,300 mm Overall height: 3,900 mm SAF axles "Off-Road" with large disc brakes, 430 mm WABCO trailer EBS with RSS stability program Chassis: Fine-grain steel, hot-dip galvanized Forced steering on the 1st and 3rd axles, TRIDEC system with rod steering 3 central lubrication points, positioned externally Tire size: 6 x 445/65 R 22.5 Cargo Floor, AGRAR version, with 15-plank system, reinforced design, 10 mm WIRELESS remote control for floor and rear door Profile supports on the side walls, completely welded from the inside (grain version) 2 reinforced transverse braces Stainless steel wear plate at the rear, under the floorboards Front wall with cleaning door Hydraulic rear door with grain slide Hydraulic connections on the front wall and additionally on the support legs PNEUMATIC DIVIDER POSITIONER RENTING is the new BUYING; with us, it is also available immediately in a full-service rental. Dkedpfxozmqmrj Adrjr

Year of construction: 2019, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Test Chamber -70 °C to +180 °C | Year of Construction 2018 Description: For sale is a high-quality climate test chamber from Vötschtechnik GmbH, model ClimeEvent C/340/70/5, year of construction 2018. The system is suitable for demanding temperature and climate tests in laboratories, research institutions, development departments, and industrial quality assurance. Thanks to the large test chamber, the powerful refrigeration unit, and the precise temperature and humidity control, the system is ideal for material, electronics, and long-term tests. The water-cooled design ensures reliable operation even under high performance requirements. Technical Data Manufacturer: Vötschtechnik GmbH Model: ClimeEvent C/340/70/5 Type of Equipment: Climate Test Chamber / Temperature Test Chamber Year of Construction: 2018 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Dkodpfoznvxiox Adror Temperature Change Rate: Heating: approx. 7 K/min Cooling: approx. 6.7 K/min Maximum Heat Compensation: approx. 3,000 W Temperature Deviation Over Time: ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range: Temperature: +10 °C to +95 °C Humidity: 10 to 98 % RH Dew Point: -3 °C to +94 °C Refrigerant: R449A – 2.50 kg R23 – 0.75 kg Power Connection: 3/N/PE AC 400 V ±10 %, 50 Hz Rated Power: 8.6 kW Rated Current: 21 A Sound Pressure Level: approx. 57 dB(A) Design: Water-cooled Dimensions (approx.): External: 1,830 × 900 × 1,890 mm (H × W × D) Internal: 750 × 580 × 765 mm (H × W × D) Weight: approx. 650 kg Equipment: Color Touchscreen Control Stainless Steel Test Chamber Interior Lighting Large Viewing Window Water-Cooled Refrigeration Unit Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Extensive Accessories as Shown in Photos Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Automotive Aerospace Research & Development Quality Assurance Aging and Stress Tests Condition Used. The device is in good condition with typical signs of wear and tear consistent with its age. Scope of Supply: Vötschtechnik ClimeEvent C/340/70/5 Accessories as Shown in Images Service Shipping: Inspection by appointment is possible at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder is possible for an additional charge. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2025, operating hours: 2 h, power: 51 kW (69.34 HP), motor manufacturer: Hyundai, front tire size: 300/70 R20, rear tire size: 420/85 R24, Equipment: air conditioning, Technical information Number of cylinders: 4 Front tyre size: 300/70 R20 Rear tyre size: 420/85 R24 Dedpfx Adszrry Dsrekr Drive: Wheel Empty weight: 2.770 kg Condition Technical condition: very good Visual appearance: very good Other information Pto: 540/1000 Transport dimensions (LxWxH): Länge: 4.070 mm, Breite: 1.820, Höhe: 2.530 mm Additional information Please contact Tobias Mayr for more information = Additional options and accessories = - Front loader - Single wheels

Condition: used, mileage: 88,150 km, power: 132 kW (179.47 HP), first registration: 10/2018, fuel type: diesel, overall weight: 7,000 kg, next inspection (TÜV): 06/2027, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 6, loading space length: 3,100 mm, loading space width: 2,180 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), parking heater, soot filter, CTM steel three-sided tipper, loading dimensions i.e. 3100 x 2180 x 400 mm, 4 pairs of recessed lashing eyes in the floor, load protection grid behind the cab, Palfinger PK 7001-K loading crane behind the cab (year of manufacture 2018) with floor control and oil cooler, lifting capacity at max. 6.30 m / 870 kg, Kinshofer Type PZG 250 G two-shell grapple, nominal capacity 250 liters with endless rotary servo motor, cab with double cab passenger compartment, 4 doors and 6 seats, comfort driver's seat, driver airbag, Webasto auxiliary heater, air conditioning, electric windows (2-way), electrically adjustable and heated exterior mirrors, multi-function steering wheel, service interval display, radio/CD with Bluetooth, central locking with remote control, cruise control, ESP, lane change warning system, 6-speed manual transmission, 100-liter fuel tank, 24-liter AdBlue tank, digital tachograph, daytime running lights, fog lights, LED work lights on the cab roof at the rear left & right, rotating beacon on the cab roof left & right, trailer coupling with ball hitch, trailer socket 12 Volt / 13-pin, large plastic tool storage box on the side, right, spare wheel holder on the side, left, differential lock rear axle, GVW 7,000 kg / payload 1,750 kg, wheelbase 4750 mm, 1st owner, well-maintained by the workshop, good overall condition, not a rental vehicle!, Euro 6 engine, low noise, German vehicle with German documents, for sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! Dsdpfxjzr Sy Ro Adrekr

Condition: used, mileage: 88,150 km, power: 132 kW (179.47 HP), first registration: 10/2018, fuel type: diesel, overall weight: 7,000 kg, next inspection (TÜV): 06/2027, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 6, loading space length: 3,100 mm, loading space width: 2,180 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), parking heater, soot filter, CTM steel three-way tipper, internal loading dimensions: 3100 x 2180 x 400 mm, 4 pairs of lashing eyes recessed in the floor, headboard grid behind the driver's cab, Palfinger PK 7001-K loading crane mounted behind the driver's cab (year 2018) with remote control and oil cooler, lifting capacity at max. 6.30 m / 870 kg, Kinshofer type PZG 250 G dual-shell grab bucket, nominal capacity 250 l, with continuous rotation servo motor, cab with double crew compartment, 4 doors, 6 seats, comfort driver's seat, driver's airbag, Webasto auxiliary heater, air conditioning, 2x electric windows, electrically adjustable and heated exterior mirrors, multifunction steering wheel, maintenance interval display, radio / CD with Bluetooth, central locking with remote control, cruise control, ESP, lane departure warning system, 6-speed manual gearbox, 100 l fuel tank, 24 l AdBlue tank, digital tachograph, daytime running lights, fog lights, LED work lights on rear cab roof left & right, beacon lights on cab roof left & right, trailer coupling with tow jaw and ball head, 12-volt / 13-pin trailer socket, large plastic tool box on right side, spare wheel holder left side, rear axle differential lock, GVW 7,000 kg / payload 1,750 kg, wheelbase 4,750 mm, 1 owner, regularly serviced in workshop, good overall condition, not a rental vehicle! Euro 6 engine, low noise, German vehicle with German registration papers, sale to commercial customers only! All information without guarantee! Subject to errors and prior sale! Dkedpszr Sy Djfx Adrjr

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Dkedpovugv Asfx Adror Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Dedpfx Adozrwhgorekr Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz