Used Studer Internal Grinding Machine for sale (71,942)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive Ksdpfouxfu Njx Afdjnb - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm Knsdpfez Dvidjx Afdob workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: infinitely variable (elektronically) total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin *

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 31.211.014, center height: 225 mm, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 500 mm, workpiece diameter between centers: 500 mm, Equipment: rotational speed infinitely variable, Kellenberger UR 175x1000 CNC Kelco 70, fully functional Height increased from 175 to 225 (can be reversed) Machine no. 31.211.014, year of manufacture: 1987 Prepared for internal grinding attachment Knjdpfx Afjyyur Iodsb Accessories: 1x grinding wheel flange, left 1x grinding wheel flange, right 1x steady rest with various dressing tool holders 1x workpiece magnet 1x paper band filter No warranty, guarantee, or return Available immediately, ex works If required, transport can be arranged.

Condition: used, Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinder, center grinder -Image below: MK5 -grinding wheel mount: -Motor data: 0.3 kW 1380 rpm -Dimensions: 370/180/H480 mm -Weight: 36 kg Knsdpfxsd Atx Do Afdjb

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Knedpfst Ii Rrex Afdjb Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Knedpextdfbofx Afdjb Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h EQUIPMENT Touch probe (on 4th spindle position)

Condition: used, Year of construction: 1952, 220 mm ja Ksdpfoyn R Nwjx Afdjnb weight of the machine ca. 1,4 t

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 6861-0024, workpiece weight (max.): 250 kg, grinding length: 500 mm, grinding wheel diameter: 300 mm, total width: 4,600 mm, total length: 4,650 mm, total height: 3,580 mm, type of input current: three-phase, spindle speed (max.): 12,000 rpm, feed length X-axis: 500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 650 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, grinding spindle motor power: 50,000 W, grinding spindle speed: 12,000 rpm, overall weight: 9,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, input voltage: 400 V, space requirement height: 3,580 mm, MFG: Magerle (United Grinding) Model: MFP51 (MFP-51-50.65.65) Ksdpfxszwugdo Afdjnb Linear Axes Max X Travel = 500 mm Max X Travel Speed = 50000 mm / min Max Y Travel = 650 mm Max Y Travel Speed = 30000 mm / min Max Z Travel = 650 mm Max Z Travel Speed = 30000 mm / min Spindle Max. spindle power = 50 kW Max. speed = 12000 RPM Max. grinding wheel diameter = 300 mm Max. grinding wheel width = 60 mm Swivel Axles Swivel Range A = 210° Swivel Range B = 360° Swivel Range C = 360° Automatic 68-position tool change magazine portal magazine with inspection window and electromechanically interlocked loading station for manual loading of the tools. Ready to ship from Bangkok, Thailand

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,650 mm, total length: 4,100 mm, total width: 2,420 mm, feed length X-axis: 1,190 mm, feed length Z-axis: 390 mm, workpiece weight (max.): 525 kg, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 1,600 m/min, feed rate Z-axis: 2,000 m/min, table speed: 30,000 mm/min, spindle speed (max.): 4,000 rpm, overall weight: 5,400 kg, grinding spindle motor power: 37 W, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, rotational speed infinitely variable, ELB Smartline, fully functional, available for sale due to business closure. Please refer to the machine description for technical details. Kjdpfx Aez Dabwjfdjnb Additionally, oil mist separator, original packaging.

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Knsdpfx Aezz Hk Njfdob Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: good (used), Year of construction: 1981, Surface grinding machine, manufacturer ELB, type: SWBE 010 ND, year of manufacture 1981. Electromagnetic chuck: 1000 mm x 500 mm Grinding area: Length 1000 mm, width 550 mm, height 400 mm Kjdpfx Ajz Dv Exofdenb Grinding wheel: 500 mm x 50 mm Truing device Paper band filter Wet grinding system Electrical diagrams Space requirements: 4,000 mm x 3,000 mm, height 2,600 mm, weight approx. 3,500 kg.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased diameter and extended, hydraulic transverse movement! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau, and put into operation in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Diameter of workpiece protection ring max.: 800 mm Diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of internal grinding device on the table: max. 545 mm Transverse movement of workpiece spindle stock: max. 650 mm Swiveling of workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Transverse adjustment: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Kodpfx Ajzqcvtefdsnb Coolant system Coolant system: with magnetic separator Dimensions & Weight Machine: 4100 x 2200 x 2500 mm Europallet with accessories Coolant tank: 1700 x 800 x 750 mm on Europallet Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixators or machine feet Various grinding wheels Diamond dresser Large grinding plate Internal and surface grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, We have two CSEPEL FKP326-10 gear grinding machine as follows. 1)1991 (Changed new PLC dated on Oct. 2024) 2)1989 Included all the auxiliary tools and accessories. They are well in operation at site. Thank you very much. Best Wishes, Kedpfoz Am Nzox Afdenb Steve Bae

Condition: good (used), Year of construction: 1978, Knife grinding machine with 1300 mm grinding length, equipped with a swiveling magnetic rail. The machine is labeled Vollmer but was built by Reform. Function tested. Ksdpfeynt I Nex Afdenb

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Ksdpsw T Sd Tjfx Afdenb Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: ready for operation (used), Year of construction: 2001, DELTA LB 300 - Cup grinding machine - Grinding area max. 330x140mm - Speed range max. 2840 rpm - Max. distance table - grinding wheel 280mm - Distance grinding spindle / column approx. 300mm Knodpez Dix Ssfx Afdjb - Cup wheel dimensions 200x80x78mm - Drive power approx. 3 kW - Coolant system - Machine housing - Grinding wheel guard - Machine feet - Documentation Dimensions: L x W x H 0.7 x 1 x 1.8 meters / Weight 500 kg Errors and omissions excepted.

Condition: used, Year of construction: 1972, Max. pulling force: 10 tons Max. stroke: 1250 mm Knodpfecdtnhox Afdjb Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Throat depth: 470 mm Distance between die positions: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Condition: used, Year of construction: 2006, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm weight of the machine ca. 3,5 t Machine completely overhauled with 12 months warranty Mechanically and optically like new Photos from the last overhauled machine with different options Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter Knodpot Ii Nbjfx Afdeb -Internal grinding unit with belt drive -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l

Condition: refurbished (used), Year of construction: 2026, Kellenberger 1000U universal grinding machine, refurbished Technical details: - distance between centers : 1000 mm - centers height : 125 mm - grinding diameter: 250 mm - table orientation : -/+ 8 ° - universal wheelhead - grinding wheels dimensions : 400 x 50 x 127 mm - motor power : 3 kW - spindle speed : 1500 / 1700 / 2200 - orientation of grinding wheel holder headstock : 270 ° (3 x 90°) - boring for internal spindle : 90 mm - orientation of part holder headstock : 180 ° - spindle speed : 20 - 400 rpm - spindle internal cone : Morse 5 - motor power : 0,9 kW Knedpfjzxnf Ajx Afdob - inner cone tailstock : Morse 4 - tailstock sleeve travel: 30 mm - dimensions : 2860 x 1680 x 1670 mm - weight : 2500 kg Accessories/options: - automatic cycle works - tailstock - lubricating tank with pump - 1 internal grinding spindle - external grinding wheels - coolant tank with paper band filter type - wheel dresser - documentations - etc... The machine is partly overhauled, included: - new geometry - new electrical cabinet - bearings replaced - new painting - etc....

Condition: good (used), Year of construction: 1980, Grinding machine with an adjustable clamping bar, up to a maximum of 1200 mm. Maximum workpiece thickness: 30 mm. Knodpfxozczlrj Afdob

Condition: ready for operation (used), functionality: fully functional, grinding length 500 mm grinding width 200 mm workpiece height 250 mm Knjdez Aynwepfx Afdob table surface 600 x 200 mm grinding wheel dimensions 225 x 20 x 51 mm grinding spindle drive 1.5 kW table feed 1 - 20 m/min total power requirement 2.6 kW machine weight approx. 2 t machine dimensions approx. 2.6 x 1.6 x 1.8 m

Condition: ready for operation (used), functionality: fully functional, Vertical cup grinding machine DELTA LF 350 -Largest grinding surface approx. 155x360mm -Standard magnetic plate / Eclipse 350x150mm -Max. distance table / disc approx. 280mm -Distance grinding spindle / column approx. 315mm -Spindle speed 2840 rpm -Cup grinding wheel dimensions 200x80x78mm Knodpfx Aezz Sxlefdeb -Drive power 3 kW -Coolant system -Machine enclosure -Grinding wheel guard -Documentation Dimensions: L x W x H 0.7 x 1 x 1.8 meters / Weight approx. 550 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, coolant pump power: 150 W, grinding spindle motor power: 1,500 W, overall weight: 510 kg, grinding wheel diameter: 230 mm, For sale: Wadkin copy sanding machine in tidy condition with a wide working capacity. Kodpfx Afeyk S U Todenb

Condition: excellent (used), functionality: fully functional, Two Christen 2 - 32 drill bit grinding machines, sold as a package. Also available individually. Versatile grinding options up to diameter 32. In very good condition, not repainted. Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen. Ksdez Dbcpjpfx Afdjnb

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Knsdpfx Ajzhma Defdeb Condition: very good, machine geometrically and mechanically overhauled (see geometry report)