Used Tdg Solutions Tdg Solutions - Pgi 1000 for sale (13,813)

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm Dkjdpox Rqkuofx Aptot 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ML0313-000510, turning length: 1,275 mm, turning diameter: 481 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, The machine has only been in operation for approximately one year! MACHINE DETAILS Power supply: AC 380 V, 3 phases, 50/60 Hz Rated power: 36.11 kVA Full load current: 54.87 A Machine weight: 6,900 kg FEATURES CNC control with operator panel Tool turret Tailstock Spindle chuck Enclosed working area Long-bed design CE marking The following data is taken from a manufacturer's data sheet. The seller assumes no liability for its accuracy: TECHNICAL DETAILS Standard spindle chuck, main spindle: 12″ Maximum turning diameter: 481 mm Maximum turning length: 1,275 mm Travel distances Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Travel X-axis: 260 mm Travel Z-axis: 1,350 mm Main spindle Spindle speed max.: 2,800 rpm Spindle power max.: 35 kW Spindle torque max.: 1,613 Nm Tool changer Number of tools: 10 MACHINE DETAILS Dodpfxszf I Sco Aptjkt Dimensions & Weight Dimensions (L x W x H): 4,633 x 2,394 x 2,110 mm Machine weight: 6,900 kg

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Dodpfxjxy R Eze Aptekt

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 155847, Round grinding machine Knuth RSM 1000, year of manufacture 2012, fully functional, with internal grinding attachment. Condition: fully functional Year of manufacture: 2012 Location: West Saxony Price: on request Technical data: Manufacturer: Knuth Werkzeugmaschinen GmbH Type: RSM 1000 Serial number: 155847 Power: 9.5 kW Grinding length: 1,000 mm Grinding diameter: up to 320 mm Center height: 180 mm Dimensions: L 3,600 × W 1,650 × H 1,800 mm Machine weight: approx. 3.7 t Equipment: Digital 2-axis position display (DRO) Internal grinding attachment (standard) Dsdpozyltmsfx Aptokt Steady rest (standard equipment) Central lubrication system Coolant system Description: For sale is a Knuth RSM 1000 round grinding machine, manufactured in 2012, with a digital 2-axis position display. With a grinding length of 1,000 mm and a grinding diameter of up to 320 mm, the machine is suitable for both single-part machining and small-batch production. It comes standard with an internal grinding attachment and a steady rest for machining long workpieces. The machine is fully functional. Inspection and test run possible at the location in West Saxony by appointment. Price: on request Other machines available from site liquidation Takeover of the location negotiable.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Dkedpfx Apjx I Akustot Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG Dedpfx Apozzd Rtjtskt max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: CD072150, Hosokawa Solids Container Scale BSG – Batch Discharge Scale – Year of Construction 2021 Dksdpozim D Sefx Aptst For sale is a Hosokawa Solids container scale, type BSG, for the precise gravimetric batch dosing of powders and bulk materials. The system was manufactured in 2021 and is in very good used condition. It consists of the container scale with discharge, a stainless steel filter housing with cartridge filters, a weighing system, an Endress+Hauser level sensor, and Nord geared motors. An operating manual is available. The control system and switch cabinet are not included in the scope of supply. Technical Data Manufacturer: Hosokawa Solids Solutions GmbH Type: BSG Container Scale (Batch Discharge Scale) Year of Construction: 2021 Container Volume: 30 dm³ Container Tare Weight: approx. 75 kg Max. Product Temperature: 50 °C Max. Total Weight: approx. 150 kg gross The machine is suitable for the dosing of powders, granules, and other bulk materials in the plastics, chemical, food, and recycling industries. Inspection can be arranged at any time. Loading can be organized.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: 0i PLUS, product length (max.): 2,805 mm, number of axes: 3, This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details. • Condition: New, 0 operating hours • Control unit: FANUC 0i PLUS with 15” touchscreenCapacity • Chuck size: 6 inch • Max. turning diameter: 300 mm • Max. turning length: 510 mmAxes / Travels • X-Axis rapid traverse: 30 m/min • Z-Axis rapid traverse: 36 m/min Dodpfx Apey Ex A Uotokt • Number of linear axes: 2 (X / Z) • C-axis: Spindle positioning for milling and drilling operationsMain spindle • Max. spindle torque: 127 NmSub-spindle • Sub-spindle: Yes • Max. sub-spindle speed: 6,000 rpmTurret • Turret stations: 12 / 24 • Rotary tool speed: 6,000 rpmIntegrated options • Automatic tool setter • High-pressure coolant system: 7 bar Additional equipment • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Dedpfx Aozw Tzyoptekt Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 mm

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new Dksdpfxsyrr Rws Aptjt • Chuck size (main spindle): up to 15" (380 mm) (not included) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No

Condition: good (used), Year of construction: 1972, Turntable diameter: 1000 mm Dodpfjzzc Uqox Aptokt Torque at the spindle: 900 Total power requirement: 17 kW Machine weight (approx.): 6.1 t

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 52.000 RUNNING HOURS CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) Dkodpfox Agmyox Aptst DISMANTLED AND STORED IN POLAND, LASK CITY.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Dkodpeyxc Twjfx Aptot

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe • Pneumatic pressure shoe with "creep feed" function Dodpfxozvuy Io Aptskt • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Applications: • Calibrating and leveling solid wood components • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Very good used condition, fully functional. Dodpfx Ajxmuzmjptekt Item location: 75053 Gondelsheim See pictures Shipping by freight carrier or collection

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Dksdpfxey Dcd He Aptjt

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Dsdpfxozwwyae Aptskt Max. open height: 1050 mm Min. mold height: 350 mm Opening stroke: 700 mm

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i Series, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 750 II was manufactured in 2023. It features an impressive X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,800 × 750 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 750 II vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Table size: 1,800 × 750 mm • Spindle motor power: 28 / 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle air curtain • Tool holder type: BIG PLUS BT40 • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Machine enclosure: Full splash guard with top cover • Tool load monitoring • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics) Dkedpfezlg Amex Aptjt • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • Data server & memory card: 1 GB • AICC II – 200 blocks • iHMI easy operating system (EZI & machining cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Coolant tank on right side • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Machine lifting hooks

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. • Optional: • 5 pcs. External turning tool holders SQ20, BMT 55 (500-0696) • 2 pcs. Facing tool holders R/L (500-0701) • 1 pc. Double external turning tool holder HS/GS (500-0868) • 2 pcs. Double external turning tool holders HS (500-0705) • 1 pc. Parting tool holder (500-0709) • 7 pcs. Boring bar holders; BMT 55 ID 32 (500-0698) • 2 pcs. Triple internal turning tool holder GS (500-0707) • 2 pcs. Cover IK (500-0711) • 1 pc. Reducing sleeve set Boring (n/a) • 2 pcs. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. Adapter set PRECI-FLEX ER25 (BMT 55P) (500-0523) • 2 angled externally cooled external heat sinks Eppinger • 2 straight externally cooled external heat sinks Eppinger Additional Information As new, showroom model Technical Specification Dedpfjyrtbqjx Aptokt Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1972, total width: 1,700 mm, total length: 3,100 mm, total height: 1,600 mm, Colour: Green Empty weight: 2.500 kg Price: On request - Year: 1972 - Documentation available: No - CE certificate present: No - Serial number: 1011/447 - Drive system: Conventional - Grinder type: Internal and external grinding machine - Drive system: Hydraulic - Power [kW]: 6.5 - Distance between centres [mm]: 1000 - Centre height [mm]: 175 - Grinding diameter [mm]: 350 - Max. grinding wheel diameter [mm]: 400 - Max. grinding wheel thickness [mm]: 50 - X-axis travel [mm]: 260 - Z-axis travel [mm]: 1300 Dodpfxezy H A Ao Aptokt - Swivel range [°]: 270 - Table width [mm]: 1590 - Table depth [mm]: 140 - Main spindle power [kW]: 3 - Min. spindle speed [rpm]: 1500 - Max. spindle speed [rpm]: 2200 - Transport dimensions: 3100mm x 1700mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2022, operating hours: 1,496 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, type of input current: AC, overall weight: 3,600 kg, power: 30 kW (40.79 HP), input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, 5-axis CNC lathe "DN Solutions model LYNX 2100LMSA" with sub-spindle, driven tools and CNC FANUC i-PLUS iHMI complete with "TOP model FUSION" bar loader. Dodpfx Apotq Ayljtjkt

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,350 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a possible chuck size of up to 8" (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details. Dksdpfoyrt E Nsx Aptst • As new, showroom model • Chuck size possible : 8" (204) No chuck included • Bar capacity: 65 mm • Y travel: 30 / 36 mm • Turret stations: 12 • Turret interface: BMT 45 • Guideway type: Linear guideway • Cooling system: Coolant pump 7 bar • Design: High-performance compact turning center with a space-saving design • Productivity: Fast idle times; tool turret with BMT interface • Application: Suited for producing small parts with high precision Additional equipment • Bar feeder interface • Chip conveyor • Parts catcher • Tool setter (electric) • Oil skimmer • 3-color signal light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is supplied with a standard basic package: turret fully equipped, base holder included.Optional: • 2 pcs. External turning tool holder BMT45 20x20 single (500-0665) • 1 pc. Facing tool holder BMT45 20x20 left/right (500-0668) • 1 pc. External turning tool holder BMT45 20x20 double left (500-0675) • 1 pc. Parting tool holder BMT45 20x20 single (500-0671) • 2 pcs. Internal turning tool holder BMT45 Ø32 single left (500-0680) • 1 pc. Internal turning tool holder BMT45 Ø20 triple (500-0678) • 1 pc. Cover IK (500-0642) • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set U Drill • 1 pc. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. PRECI-FLEX adapter set PRECI-FLEX ER20 (BMT 45P) (500-0524) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, fuel type: electric, gearing type: automatic, Pezzolato electric, 300 KW 22 KW hydraulic Model PTH 1000/1000 E Sales code C6905 The machine is still connected to the electrical power supply. Dedszwdriopfx Aptskt

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Djdpfeyit Ulex Aptekt

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. Dkodpfoyt Nm Eex Aptet The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!