Used Coils for sale (1,110)

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Pgjdpfowvv Rqjx Aahou Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Pgjdpfx Aajwirz Ejhju Variant with pneumatic pressure arm (CMC P3 4000 600 M D1300) € 21.800,--

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: semi-automatic, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, pressure (min.): 5 bar, overall weight: 4,600 kg, total length: 3,000 mm, total width: 2,000 mm, total height: 1,800 mm, Equipment: centralized greasing system, Coil cutting line Italy + Strip straightener Max sheet thickness up to 3 mm Max cutting width 600 mm Sets of cutting knives (over 50 pieces) Internal coil dimensions 400-550, external up to 1500 mm Coil weight up to 5 tons Uncoiler and coiling of cut materials with spacers. Pneumatic removal of the coil from the uncoiler + cold rolling machine for sheets (to achieve narrow thickness tolerances) max material width 130 mm The machine is in production but not used We can also offer a crane with a crane for lifting the coil, which is sold separately Pgsdpfx Aow Tb Egsahou

Condition: new, Year of construction: 2024, functionality: fully functional, coil width: 1,250 mm, Material width 1250 mm Coil weight 5 t Material thickness 0.5 – 1.5 mm Pgodpfx Aowur Ebsaheu Coil inner diameter 490 - 560 mm Number of feed rollers 3

Condition: used, empty load weight: 6,500 kg, maximum load weight: 31,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2011, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, suspension: air, tire size: 385.55 r 22.5, color: red, Year of construction: 2011, Equipment: ABS, sem centered French schmitz varios, 3 disc axles, 9.0 m coil pit, height adjustable penumatic lift from 2.80m to 3.0 m, cover uncover, din xl loading, year 2011, rear doors, galvanized frame, VARIOUS UNITS AVAILABLE EQUAL-CONCESSIONARY INTERDRIVE SRL-PARMA Psdpfx Aajqpdqiohsgu

Condition: new, Year of construction: 2024, neu 2024 7314 prompt, Zwischenverkauf v Türkei 14800 € 284.16 € 1 2500 kg 1300 mm 450 mm 550 mm 600 mm 80 mm 1600 mm 1550 mm Pgsdpfx Aajwirrkjhsu 2000 mm 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder

Condition: good (used), functionality: fully functional, empty load weight: 8,600 kg, maximum load weight: 29,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 01/2025, loading space length: 1,360 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, suspension: air, tire size: 385.65 r 22.5, color: blue, Year of construction: 2015, Equipment: ABS, sem tecnokar talento, double-sided tipper with coil hole, 3 disc axles with 1st liftable and 3rd steering, abs, pneumatic suspension, abs, 130cm sides that open with hydraulic pistons, 13.80m long, steel platform, year 2015, rear door with book opening, stainless steel tool boxes, ADR, tare 86q.li, wood holder, excellent condition, inspected until 07.31.2025 - INTERDRIVE SRL DEALER - PARMA Pjdpfx Aasvlx Raehegu

Condition: used, Year of construction: 1988, gebraucht 1988 070009 prompt, Zwischenverkauf v Pgsdswirq Tepfx Aahju Deutschland 1600 € 400 mm 700 mm 1500 mm 2050 mm 820 mm 1000 mm with brake with 2 spare mandrels

Condition: good (used), functionality: fully functional, empty load weight: 10,300 kg, maximum load weight: 28,700 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 07/2013, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,980 mm, suspension: air, tire size: 435.50 r 19.5, color: red, Year of construction: 2013, Equipment: ABS, Luek semi-trailer, 4-axle flatbed with frame, 4 axles with 3rd and 4th steering and 1st liftable, air suspension, ebs, removable and storeable rear ramps under the 2.50m long flatbed, mega frame with predisposition for lift and lower and sliding cover and uncover, flatbed with coil hole, and lateral and central rulasi uprights, fifth wheel height hooks from 96cm to 1.05m, internal height 2.98m, year 2013, 15 pairs of rud hooks on the 8 ton flatbed, inspected until 05/31/2025 - INTERDRIVE SRL DEALER - PARMA Pgodpfovcdi Ajx Aaheu

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12100 € 232.32 € 2500 kg Pgsdpfjwirqasx Aahsu 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 600 M D1300) € 14.800,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

Condition: good (used), functionality: fully functional, empty load weight: 7,500 kg, maximum load weight: 31,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2018, Equipment: ABS, Semi-curtained French Hupac P385 with French curb with sliding cover and side tarpaulins, wooden floor with 8.50m coil hole, 10 pairs of uprights, ro-ro ship hooks, ADR EXII, year 2018, 2 units available unless sold, regular inspection until 10/31/2025 - INTERDRIVE SRL DEALER - PARMA Pedpfx Aovcc Nzjahegu

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,-- Psdjwirp Aspfx Aahsgu

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm Pgjdpfjwirp Nex Aahou 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 400 M D1300) € 14.500,--

Condition: new, neu 070143 November 2025, Zwischenve Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive Pgjdjwirz Sepfx Aahsu mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control

Condition: new, neu Pgodpfxswirmuo Aahou ca. 10 Wochen ab Auftrags Türkei 6900 € 133.17 € 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC DOWN HOLDER SUPPORT ARM

Condition: new, Year of construction: 2025, neu 2025 070116 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm Podpfx Aaewv H Awjhjgu motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control WITH PNEUMATIC DOWNHOLER

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t Pgodpfx Aaod Ha Hcohou stroke: 1.000 mm

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t stroke: 1.000 mm Podpfx Aslimrxjahjgu

Condition: new, machine/vehicle number: cd0062ee491e6794168ccb01a, empty load weight: 8 kg, maximum load weight: 26 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r 19,5, Further information Chassis semi-trailer In proven HANGLER welded construction made of high-quality steel with UP-welded side members tapered towards the front. Frame neck height 120 mm, with double center bar. Z-profile cross members punched through on the side member with floor panels (larger spacing) and with welded special side frame.2 kingpins to DIN 74080, replaceable, with grinding plate beveled to the front, made of high-quality sheet steel. EC front turning radius 2,040 mm. Sliding plate continuously welded from saddle plate to front plate *inside* 18 pairs of lashing eyes embedded in the outer frame, 2.5 tons each 8 pairs of lashing eyes embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side collision protection Plastic mudguards with splash protection mats Underride guard Impact protection at the rear Spare wheel holder for 1 e-wheel, with wheel mounting kit Pjdpfx Aei Riw Hsahegu 3 Plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Aluminum ladder 3 300 mm, loose Pair of recessed stanchion pockets Piece of stanchions Storage compartment for plug-in slats on one side in FR left, below loading area Storage compartment for drop sides underneath the cargo bed, open, if technically possible Coil trough/inclined loading device Coil trough 8,000 mm long with cover and rubber pad. Cover 35 mm. With inclined loading bars and supports suitable for FR 80/80/4, complete stanchions 80/80 incl. lower reinforcement supplied Hydraulic sloping loading device with 4 crossbars:Hydraulic supply via tractor unit by means of 2-pipe pump system (forward/return) with 2-fold Faster coupling mounted on bulkhead (hoses are connected to Faster coupling from below).Sloping loading bars (FR 180x100x8 mm) with integrated extension part can be locked in height. Multi-stage hydraulic cylinders, each beam with cardanic suspension Incl. outriggers - adjustable - with bolt safety device underneath the loading area5-fold control block for operating the sloping loading device and for folding device sliding roof.1 set of boiler floor holder with height-adjustable support bolts for different boiler floor diameters, incl. shelf.1 piece of stop protection for sloping plate - for securing to the front! Axles + suspension SAF disc brake axles Offset axle spacing mm Air suspension Brake system 2-line compressed air brake system Aluminum air reservoir Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Wabco, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle - driving stability system Wheels and tires 435/50 R 19.5, manufacturer's choice Factory silver steel rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 additional LED work light(s) at the rear, switched via reversing light 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, detachable with plug 1 rotating beacon with holder, detachable Floor Screen printing plates approx. 3

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 50 kg Part suitable for: machines Type number: 542-2341, 591-8630, 540-7019 CAT320 Hydraulic oil system Caterpillar TRANSPORT DAMAGE - NEW OEM : 542-2341, 591-8630, 540-7019 Article nr.: S081013001N-veiling Hydraulic oil system Caterpillar Pjdpfx Asxip Tioahegu

Condition: new, Year of construction: 2024, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 5 mm, coil weight: 4,000 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness copper (max.): 5 mm, sheet thickness brass (max.): 5 mm, cutting speed: 40,000 mm/min, product height (max.): 3 mm, working width: 600 mm, type of input current: three-phase, total width: 3,500 mm, total length: 12,000 mm, total height: 2,200 mm, Coil Slitting Line Satılık Rulo Sac Dilme Hattı 0.5 - 3 mm Thickness x 600 mm Width x 6 Ton Coil Weight Pgsdpfx Astpviqjahou Ideal line for production of Galvanized Grounding Strip production. Topraklama şeridi imalatı e dar bant dilimleme işlemleri için ideal bir hat. Please contact for further details. #coil #slitting #coilslitting #slittingline #uncoiler #decoiler #slit #recoiler #tensioner #coilprocessing #earthing #grounding #grounding #GalvanizedGroundingStrip #GroundingStrip #Strip #topraklama #topraklamaseridi

Year of construction: 1995, condition: used, RSB 360: Semi Automatic Pgsdpfx Aegnh Scoahju SU 700: Standart Machine Punch dies available: 3:1, 2:1 ring wire, calendar, coil, plastic comb, tear-off perforation

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Pgjdpfx Aaexlcp Nohsu Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: ready for operation (used), Fröhling Stainless Steel Cut to Slitting Line Technical Data: Material: Stainless Cr Ni and Cr steel strips The slitting knife spacers worth 70,000 euros will be included with the machine as a complimentary gift. Coil Width: 12 – 500mm Cut Length: Free cutting Thickness: 0.30 – 2.5 mm Tensile strength: Max. 80 kp/mm² Elongation: Max. 50% at 80 kp/mm² Strip thickness: 0.2 – 2.5 mm Raw strip width: Max. 500 mm Number of cuts: 12 and more, 9 cuts at 2.5 mm thickness 12 and more at 0.2 – 2.0 mm thickness Line speed: 0–75 m/min for strip thickness 0.2 – 2.5 mm 0–150 m/min for strip thickness 0.2 – 1.0 mm Feeding speed: 15 m/min Coil weight: Max. 4500 kp Line direction: From left to right (viewed from operator side) The slitting knife spacers worth 70,000 euros will be included with the machine as a complimentary gift. Blade List Size Quantity 5 mm 33 6 mm 32 7 mm 59 7.70 mm 10 8 mm 330 5,4 mm 15 6 mm 20 7 mm 20 8 mm 20 10 mm 24 15 mm 20 20 mm 20 1 mm 20 1,05 mm 20 1,1 mm 20 1,15 mm 20 2 mm 20 3 mm 20 Psdpfx Aewbt Iqeahjgu 4 mm 15 5 mm 15 5,15 mm 15 5,2 mm 15 5,3 mm 15

Condition: excellent (used), Stainless Steel Cut to Length Line • Coil Weight: 2 tonnes • Coil Width: 100 – 500mm • Cut Length: 150 – 500mm • Thickness: 0.30 – 1.0mm • Max Coil O/D: 500mm Pgodpewbzbxofx Aahsu