Used Trimill Vu 2313 for sale (123)

Condition: used, Year of construction: 2005, load capacity: 2,000 kg, lifting height: 6,330 mm, total length: 2,080 mm, 4-way forklift Baumann EVU 20/13.12/63TR.9.5 Drive Electric Year built 2005 Fpjdszzfzajpfx Ap Den Lifting height (mm) 6,330 Lifting weight (kg) 2,000

Condition: used, axle configuration: 3 axles, suspension: air, Year of construction: 2018, Year of manufacture: 2018 Suspension: air suspension Rear axle 1: Double wheels Fpedpjz Hw Dbjfx Ap Den Rear axle 2: Double wheels Rear axle 3: Double wheels; Steering Empty weight: 11.940 kg Carrying capacity: 36.000 kg GVW: 48.000 kg 3 asser Steering axle Long 1320 cm extendable up to 1919 cm Width floor 254 cm Winsch

Condition: used, functionality: fully functional, machine/vehicle number: 6624656, Year of construction: 2018, operating hours: 2,313 h, load capacity: 1,400 kg, lifting height: 3,700 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 1,830 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6624656 Mast type: Triplex Fodpfx Apjuhxkae Djpn Condition: Reconditioned without warranty Technical condition: very good Battery Volt: 24V Battery Ah: 250Ah Battery year of construction: 2018 Description: Toyota SWE140 No.: R0357 Year of manufacture: 2018 Operating hours: 2313 The device is visually and technically in very good condition. Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Fpjdpfx Apsvvkc As Den Storage location: Nattheim

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Fpsdpfx Asx R A A Nsp Den Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm Fedpfxsx Ap Ito Ap Dspn - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: refurbished (used), functionality: fully functional, Nordson Problue hotmelt unit equipped with an automatic filling system (Fulfill). This unit comes standard with two hose connections but can be supplied with four hose connections upon request (surcharge €750). The offer includes the unit with the filling system; a suction lance and a hose with container are not included but can be supplied separately. Work safely, cleanly, and with less manual effort using this fully operational hotmelt glue unit. Fpedpfsxtc Twex Ap Dsn

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Fpodpfxjzwu Die Ap Den Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Fedpfsrivwfsx Ap Dspn Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: excellent (used), Novumax H2R 625 / 600 kW heating boiler Buderus/Viessmann Fjdpfxeywzx Ao Ap Dopn

Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth. The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye. Fpjdsvv Nwxjpfx Ap Den As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network.

Condition: new, machine/vehicle number: 9151, Year of construction: 2024, operating hours: 3 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: diesel, mast type: triplex, construction height: 2,313 mm, Equipment: sideshift, .: 9151 Device details: Year of manufacture: 2024 Load capacity: 3500 kg Lifting height: 4700 mm Read operating hours: 3 h Free lift: 1460 mm Mast type: Triplex Mast height: 2313 mm Length/Width/Height: 2800 / 1235 / 2230 mm Operating weight: 5215 kg ---- Equipment: * Protective roof * 3rd valve * 4th valve * Full free lift * Work lights front ----- Attachments: * Sideshift * Load guard ---- Further device information: ---- Operating hours are generally indicated as read hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and cleaning machines are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to seeing you! We speak English Interim sales and errors for this offer are expressly reserved. Fpsdpfotw Az Dsx Ap Don In the dealer business, the device is sold in its CURRENT condition, not refurbished. All information without guarantee, errors and changes reserved.

Condition: good (used), Year of construction: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC Control: FANUC 160i Software: Quinto 4.3 Activated software options (option numbers): 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel range: +150°/ -60° C’-axis swivel range: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0 – 10,000 rpm Max spindle power: 26 kW HSK 80 interface Max. number of wheels: 6 Workpiece spindle head: Vmax: 180°/s Drive power: 1.6 kW Fpodpfju A Dn Njx Ap Den ISO 50 interface Precision (resolution): Linear axis resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3,100 mm Width: 1,915 mm Height: 2,190 mm Weight: 8,500 kg U-axis is integrated with steady rest, clamping cylinder, and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic collets Technical data subject to change without notice

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Fpedpfxek S Dt To Ap Den Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), mileage: 66,266 km, power: 120 kW (163.15 HP), first registration: 04/2017, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 7,200 mm, total width: 2,100 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,500 kg, Year of construction: 2017, Equipment: AdBlue, Bluetooth, air conditioning, airbag, central locking, electric window regulation, onboard computer, power assisted steering, traction control, trailer coupling, General information Cab: single Registration number: 40-BJL-1 Technical information Engine capacity: 2.143 cc Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Front axle: Max. axle load: 1850 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Max. axle load: 3500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 3.196 kg Carrying capacity: 1.804 kg GVW: 5.000 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Functional Tipper: Back Maintenance, history and condition APK (MOT): New APK (MOT) upon delivery Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - Heated door mirrors - Lane assist - Leaf spring suspension - Radio/Cd/Audio system - Twin wheel axle Fpedpfx Ajycgmujp Don = Remarks = Video of the vehicle in operation: Very neat and in mint condition Mercedes Sprinter 516 CDI GVW 5,000 KG N2 WB 433 Tipper Air conditioning Lane Assist 66,000 km verifiable

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Fsdpfx Apsx R Dtpj Djpn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Fjdpsrivv Eefx Ap Dspn Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, functionality: unexamined, total width: 300 mm, conveyor belt width: 290 mm, -KOM 1550- Offered here is a magnetic belt conveyor. The technical data can be found in the images and on the nameplates. Note: The chip conveyor is available from our stock and can be inspected under power. Motor: Manufacturer: SEW Eurodrive Type: R43-VU01 Fpsdpfx Apoyvfqlj Don

Condition: excellent (used), max planing width 770mm Fodpfx Apjv H U Nbe Depn max planing height 200mm additional 5 spindle 220mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Fpodpfx Ajrivxcjp Don Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: used,

Condition: new, pressing force: 280 t, 280 t servo double-column heated press with heating plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled an order for two identical machines. This gives you the opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown depict similar, previously built machines from the factory and are for reference purposes only. Technical data & information: ==== General information Press force: 280 t Design: servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides Clear width between uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 900 mm Overall height approx.: 3,500 mm Width incl. control cabinet approx.: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Fixed lower table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Pump capacity: 72 l/min Motor power: 10 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Travel measurement: encoder Pressure measurement: data recording ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure-holding function for up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heating element control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Stroke limitation via Leuze measuring rod and monitor Fpjdpfxoyynale Ap Den Two-hand operation Ram return via operating button Light curtain protection front and rear up to 2,500 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems by Sick / Pilz / Keyence / Datalogic ==== Additional included features 40 mm thick base plate with chamfered ramp 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression molding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, lamination processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression molding press, press with heating plates, industrial machine, special machine, tool adjustment press, tryout press, tool try out press.

Condition: new, pressing force: 1,100 t, 1100 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled their order for two identical units. This provides an opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under attractive terms and with comparatively short delivery times. The photos shown display similar, already completed machines from the factory and are for reference purposes only. Technical Data & Information: ==== General Specifications Press force: 1,100 t Design: Servo Double-Column Heated Press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides (Ø 150 mm) Clear opening between columns: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. shock absorber and heating plate: 1,000 mm Overall height approx.: 4,600 mm Width incl. control cabinet approx.: 3,250 mm Depth approx.: 1,700 mm Weight approx.: 41,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,600 × 1,100 mm Ram with T-slots: 1,500 × 1,100 mm Heating plate: 1,100 × 1,100 × 140 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic unit: Duplomatic Hydraulic pump: Bosch Rexroth / Baumüller / Servo Pump capacity: 240 l/min Fpodpfjyyna Sox Ap Den Motor power: 32 kW Servo hydraulics: included Control system: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Position measurement: encoder Pressure measurement: digital data acquisition ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure holding up to 15 minutes Electrically heated plates up to 250 °C Heating power: 60 kW Temperature monitoring and heating rod monitoring via monitor Piece counter Alarm management Downstroke accuracy: 0.1 mm Travel limitation via Leuze measurement rod and monitor Two-hand operation Ram return via control button Light curtain safety front and rear up to 1,900 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems from Sick / Pilz / Keyence / Datalogic ==== Additional Included Features 40 mm thick base plate with chamfered ramp 4 vibration damping pads Energy-saving servo hydraulics Applications: Heated presses, compression moulding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical moulded parts, lamination processes, industrial large-scale production, special purpose machinery manufacturing Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression moulding press, press with heating plates, industrial machinery, special-purpose machine, tool trial press, tryout press, tool try out press

Condition: refurbished (used), overall weight: 3,500 kg, Dimensions : 1.300 x 3.500/2, double decker Fodpfeq Ttm Usx Ap Djpn Cross brace, complete with springs, spring brackets, electric motor and motor console, completely overhauled in the workshop and new bearings

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 230 kg, hopper volume: 200 l, FOOD-GRADE BAG EMPTYING HOPPER Fpsdpfow Sddisx Ap Den Upward-opening vertical door Transparent plexiglass inspection window Food-grade EPDM door gasket Round tubular handles Removable grid – 5 mm thickness, 20x20 mm mesh size 3 suction pipes Ø60 mm with reduction to Ø50 mm, adjustable suction flow rate as specified Connection for level sensor G1"1/2 (positioned in the last third) Completely manufactured in AISI 304 stainless steel Total weight: 230 kg Internally polished finish