Used Cp 700 Wechselbrücke for sale (6,943)

Condition: used, maximum load weight: 12,840 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 46 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0123587_1 – Manufacturer: Krone. * Double corner fittings * Roller shutter door (aluminum) * Keyhole system inside * Forklift accessible * Support legs fixed * Device for rail loading * Lashing points Storage container – weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Substructure with signs of wear and tear, some surface rust. Isolated paint flaking on components of the demountable body. Isolated surface rust on components of the demountable body. Deformations/stops on components – see pictures. Dwsdpfxeznix Ns Adrja Dimensions are approximate. Offer subject to change; we reserve the right to sell in the meantime. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2011, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2011, Vehicle No. G0123829_1 – Manufacturer: Krone. * Double-deck configuration Djdpezniyyjfx Adrswa * Simple corner fittings * Contour marking on side/rear * Load certificate Code-XL * Roll-up rear door (aluminum) * Keyhole system inside * Forklift-compatible * Front wall recess * Device for rail loading * Lashing recesses * Lashing points Double-deck configuration without double-deck load beams (available at an extra charge!). Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Partial paintwork. Subframe with signs of wear. Valid UVV certificate. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 14,000 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,615 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,930 mm, Year of construction: 2007, Wagon-No. G0119287_SAMPLE - Manufacturer: Krone. * Basic corner fittings * Forklift accessible * Front wall recess * Fixed support legs * Facility for rail loading * Lashing pockets Dwjdpfxjzniuws Adrsa * Lashing points Delivery time upon request! Technically ready for operation, no further repairs required. Undercarriage shows signs of use, some surface rust present. Occasional paint chipping on parts of the swap body. Isolated rust on various components of the swap bridge. Deformations / bumps on components - see pictures. Multiple available! Dimensions are approximate. Offer subject to prior sale, prices are net ex location D-59302 Oelde. Further details on request by phone or email:

Condition: used, maximum load weight: 12,840 kg, overall weight: 16,000 kg, first registration: 01/2003, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, loading space volume: 46 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2003, Wagon No. G0123976_1 - Manufacturer: Krone. * Double corner castings * Roller shutter door (aluminium) * Internal keyhole system * Stackable * Forklift accessible * Telescopic support legs Dodpfx Adezniwxsrewa * Rail transport device * Lashing points Storage container weatherproof, secure lock, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY AVAILABLE. Technically operational condition, no further repairs needed. Undercarriage shows signs of use, partial rust formation. Occasional paint peeling on swap body components. Isolated rust formation on components of the swap body. Deformations / impacts on components – see photos. Dimensions are approximate. Offer is non-binding, subject to prior sale. Prices are net, ex location D-59302 Oelde. Further details upon request by phone or email.

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2023, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,760 mm, Year of construction: 2023, Wagon No. G0115525_1 - Manufacturer: Krone. * Simple corner fittings * Contour markings side/rear * Code XL cargo certificate * Aluminum roller shutter door * Forklift accessible * Fixed support legs * Rail loading facility * Lashing options Djdpfx Aeznivnodrswa LASI CODE XL !!!. Multiple units available!. Like-new condition!. Delivery time: IMMEDIATELY. UVV (German accident prevention regulations) valid. Dimensions are approximate. Offer subject to change without notice. Prices are net ex works, D-59302 Oelde. Further details are available by phone or email:

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2011, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2011, Vehicle No. G0123830_1 – Manufacturer: Krone. * Double-deck configuration * Simple corner fittings * Contour marking on side/rear * Load certificate Code-XL * Roll-up rear door (aluminum) * Keyhole system inside * Forklift accessible * Front wall recess * Fixed support legs * Device for rail loading * Lashing recesses * Lashing points Dedjzniygopfx Adrjwa Double-deck configuration without double-deck loading beams (available at an extra cost!). Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Partially painted. Substructure with signs of use. Valid UVV certificate. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change; we reserve the right to sell the item in the meantime. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced during normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Djdpfsycf D Sox Adrewa Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants from the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Dwodjmqlguepfx Adrsa CORMAK: Technology that drives your success! Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Weight 120 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or small production line? The CORMAK LUFT 700 screw compressor is the perfect choice. With a 5.5 kW motor and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air required for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. This model is designed for continuous operation, making it ideal for demanding applications such as tire service centers, smaller automotive workshops, and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter and more stable operation. The LUFT 700 features a direct-drive system, providing significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution guarantees optimal utilization of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and process control. Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. Dwsdpeza Aptsfx Adrsa The combination of the proven reliability of an induction motor with intelligent control makes this screw compressor an extremely efficient, economical, and flexible source of compressed air, perfectly suited to the dynamic needs of modern industry. High-quality CORMAK screw compressors, such as the LUFT 700 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven engineering solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to withstand even the most intensive operating conditions. In CORMAK screw compressors, such as the LUFT 700, a key component ensuring reliability and optimized operation is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 5.5 kW Power supply: 400V / 50Hz Air delivery at 0–6 bar: 690 L/min Air delivery at 6 bar: 650 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 630 L/min Outlet connection (G): 1/2" Dimensions: 1445 × 610 × 1410 mm Weight: 200 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Dodpfx Aoycg Ryodrewa Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Dwsdpsrh E Erjfx Adrea Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER Dwedsycg I Sepfx Adrsa SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Djdpfxsyguq Ao Adrswa Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. Dodpeyguirjfx Adrswa The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Dedpjrh E Disfx Adrswa Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Dsdpfjzqdagjx Adrowa Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Equipment: Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! Dwjdpfx Aezm Rziodrja The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, functionality: fully functional, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (L x W x H) in mm: 4,500 x 1,150 x 700 Width including drive: 1,050 Conveyor length in mm (retracted): 4,500 Conveyor length in mm (extended): 12,500 Conveyor width in mm: 700 Conveyor height in mm: 640 Load capacity between 2 supports in kg: 20 Support roller axle type: Steel Support roller diameter in mm: 40 Support rollers per axle: 1 Support roller material: Steel Roller pitch in mm (retracted): 50 Roller pitch in mm (extended): 115 Drive: 10 x motor stations Motor manufacturer: SEW Dedpfozrr U Iox Adrswa Motor specifications: 0.12 kW (total 1.2 kW), 230 V Conveyor speed in m/s: 0.7 Net weight: 360 Special features: Emergency stop, Schuko plug, Steinmetz circuit Condition: used / fully functional Functional test: OK

Condition: good (used), Year of construction: 2003, functionality: fully functional, Offered is a Clipper Poly Clip PDC 700, year of manufacture 2003. The machine is in good condition, fully functional, and immediately ready for use. Includes thread dispenser and loop former (caliber 28 to 115 mm). Further information upon request. Payment in cash or advance payment. Sale only to commercial customers, no warranty or guarantee. Dwsdpfsxh Hprex Adrea

Condition: like new (used), Year of construction: 2022, operating hours: 19,220 h, functionality: fully functional, Upon request, you will receive the extensive photo collection of the machine. Upon further inquiry, video recordings of the machine in full working order will also be provided. Manufacturer: HELLER Model: CP 6000 Year of manufacture: 2022 Machine type: Horizontal 5-axis milling-turning center Control system: Siemens SINUMERIK 840D sl Tool interface: HSK-T 100 Technical data: Travel in X-axis: 1,000 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,300 mm Pallet size: 630 x 630 mm Max. pallet load: approx. 1,400 kg Max. workpiece diameter: 1,000 mm Max. workpiece diameter with limited Z-axis travel: 1,580 mm Max. workpiece height: 1,200 mm Number of axes: 5 Machining: 5-sided and 5-axis simultaneous machining Turning machining: horizontal, vertical and angled Rotary table: directly driven torque rotary table Rotary table axis: 360° continuous Pallet changer: integrated, automatic Spindle: Spindle design: PCU 100 PowerCuttingUniversal Tool interface: HSK-T 100 Max. spindle speed: approx. 8,000 rpm Max. spindle power: approx. 60 kW Max. torque: approx. 1,146 Nm Spindle lock for turning machining Swivel range of the spindle head: approx. +15° to -190° Tool magazine: Tool positions: 340 Max. tool diameter: approx. 280 mm with free adjacent positions Max. tool length: approx. 600 mm Max. tool weight: approx. 25 kg Automatic tool changer Equipment: Siemens SINUMERIK 840D sl CNC control system Integrated pallet changer 5-axis simultaneous machining Milling, drilling, threading and turning machining Directly driven torque rotary table KNOLL coolant and filter system Chip conveyor Mobile chip container Work area and/or oil mist extraction Work area flushing Separate operator and operating data terminals Dimensions of the base machine: Length: approx. 7,750 mm Width: approx. 5,450 mm Height: approx. 4,400 mm Brief description: Dwjdpfezmn Adjx Adroa Universal horizontal 5-axis milling-turning center for complete machining of complex workpieces in a single setup. The HELLER CP 6000 enables powerful milling, drilling and turning operations as well as horizontal, vertical and angled turning machining. Equipped with Siemens SINUMERIK 840D sl, HSK-T-100 spindle, directly driven torque rotary table, integrated pallet changer and KNOLL coolant and chip handling system. All technical data are approximate and non-binding. Subject to errors, changes and prior sale.

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement. Dwedozrl A Eepfx Adrsa

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container with refrigeration dryer and level-controlled condensate drain with sound insulation hood with CEE plug with metal buffer set for compressed air tanks Technical data: Dsdperxu Ersfx Adrjwa Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 15995729164, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 3,400 kg, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 2,340 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 2,500 mm, 2013 DMG Mill Tap 700 Made in Germany. Dedpfx Aozmggnedrowa Equipped with below options 24000rpm spindle, 25 tool station (5th Axis) LEHMANN EA-507 CNC Rotary Table Production package TSC 20bar Chip conveyor Renishaw probe OMP 60 + OTS tool setter Main Spindle needs repair Technical Specifications Year of Manufacture: 2013 Control Unit: Siemens 840D Solution line X-Axis Travel: 700 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm Table Size: 840 x 420 mm (Max load: 400 kg) Spindle Taper: BT 30 / BBT 30Spindle Speed: 24,000 rpm Tool Changer (ATC): 25-station pick-up system Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Machine Weight: Approx. 3,400 kg Overall Dimensions: 1,650 x 2,340 x 2,500 mm Included Accessories / Equipment pL LEHMANN EA-507 CNC Rotary Table (5th Axis) with complete cabling/integration.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Djdpfx Aezmfxiodrswa Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, tank capacity: 50 l, total height: 1,033 mm, total width: 735 mm, total length: 1,279 mm, water tank capacity: 50 l, battery voltage: 12 V, gradeability: 2 %, sweeping width: 700 mm, battery capacity: 210 Ah, empty load weight: 240 kg, SSM 700, Handheld Scrubber-Suction Machine Battery-powered model with two disc brushes, electric drive, and a working width of 700 mm. Trailing scrubber-suction machine with extensive functionality for complete control over cleaning operations. Maximum productivity of up to 3150 m²/h. Approximately 3.5 hours of battery runtime allows for uninterrupted operation. Two cleaning programs are pre-installed; one program can be customized according to requirements. Intuitive and simple control via a central rotary knob. All-purpose cleaning brush reduces cleaning agent consumption. ECOselect mode: Cleaning in sensitive areas is possible by reducing the noise level, lowering energy consumption, and increasing operating time by up to 20%, reducing water consumption and brush wear, and lowering maintenance costs for the motors. Combination of optimized positioning of the vacuum motor, sound insulation, and separation of the airflow for a very quiet machine, allowing for a further reduction of the noise level in ECOselect mode. Dwedpfx Ajzqultedrja Adjustable handle for comfortable and easy operation. Integrated, easily accessible battery charger. Electrical components are optimally protected. Easy access for cleaning and maintenance. Brush heads are interchangeable, meaning that only one machine with different brush heads is needed instead of multiple machines.