Used Aft 13 / 25 for sale (25,328)

Condition: used, empty load weight: 8,462 kg, maximum load weight: 27,538 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2018, suspension: air, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedpfjy Apigex Aptekt - .

Condition: used, empty load weight: 8,270 kg, maximum load weight: 27,730 kg, overall weight: 36,000 kg, first registration: 03/2019, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, Dkedsy Apkqjpfx Aptot ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional Dkedpfx Aswxvadjptst You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Dsdjv D Abtopfx Aptokt

Condition: new, For inquiries about the attachment, Mr. Herden will be pleased to assist you by phone. Seppi M. BMS 125 Forestry Mulcher / NEW / in stock & immediately available Price: €30,690.00 net / €36,521.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulching attachment for excavator mounting - Ideal machine for mulching in hard-to-access areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm Ø - For excavators from 13 to 30 t - For installation on various mounting plates - Drive designed for hydraulic motor, depending on carrier oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge across the entire hood length - Front and rear chain guards - Height-adjustable support skids in sandwich construction, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool holders - Replaceable rotor stub shafts OPT 465 M-BOOST angled-axis piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required oil flow: 80 - 170 l/min Three hydraulic lines required: supply, return, and drain. The unit is supplied without hoses, connectors, or mounting plate. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden will be pleased to assist you by phone. Financing quote available on request. We are official sales and service partner for DMS, Westtech, Gierking GMT, OilQuick, Weber MT, Holp, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale! = More Information = Please contact Marius Herden for more information. Dedpfx Apjyii Tzjtskt

Condition: used, mileage: 17,255 km, power: 335 kW (455.47 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #365 MB ACTROS 2546 6x2/ Kroll ADR Suction Vehicle, K 1.0 - 13.5 / 36 PESP Body KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5/36 PESP * 14,500 liter tank capacity (air volume) * 10,000 liter sludge volume | 3,500 liter emulsion chamber * 1,000 liter rinse water volume (non-pressurized) * Discharge with sliding piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on driver’s cab * Reversing camera * Navigation system * Air conditioning * Coolbox Vacuum system CVS VacuStar W1300, approx. 1,200 m³/h at 400 mBar * Suction hose cassette with telescopic boom and 20m DN100 High-pressure system Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60m DN 13 * Approx. 60m rinse hose DN 13 Special features ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Remote-controlled suction connection pre-piston chamber DN100 * Manhole DN500 on left side * HP lance * Noise protection cladding for the pumps left and right * LED environment lighting * Remote control with two batteries * Tiltable debris container * Reversing camera * Ladder with bracket and anchor points * Advertising board on left and right of tank Dodpfsxa T Ryox Aptekt Technical Data GVW 26,000 KG * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Optional Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, Equipment package: ADR, Right exterior mirror with shunting position, 220 Ah battery, brake connections standard and DuoMatic, interactive multimedia cockpit, electrical preparation in cab 24V / 100 A, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3-leaf, front windshield tinted with band filter, hazardous goods version ADR type FL, 12-speed transmission - Type: G 211-12, 3-piece fender, 3-piece fender with splash guard, fuel tank: 510 L aluminum, left, cool box/cooler, 2-cylinder air compressor, reinforced engine brake, steered trailing axle 9 t, liftable, double PTO MB 123-11b/1c, programmable special module, wheelbase variant 4300 mm, frame overhang 1650 mm, rain sensor, acoustic reversing alarm and warning beacon (external warning signal), additional remote control key (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver’s seat velour, cab seats: both-sided armrests passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver's seat, exterior sun visor, steel rims 11.75x22.5 (on front axle), socket 24V / 25A in passenger footwell, additional socket 24V in passenger footwell, steep shoulder rims 11.75x22.5 (on trailing axle, reinforced), preparation for 4 environment cameras (display on vehicle monitor), preparation for additional headlights, seat belt warning device passenger, seat belt warning devices, transmission oil cooler For further details and/or pictures, please contact us directly. You will find a large selection of other vehicles for BUYING or RENTING at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively...

Condition: good (used), Max width between claws 1200mm Max diameter of processed material 500mm Dkodpfjtn Rw Njx Aptet

Condition: used, Year of construction: 2009, Used Machine Year of Manufacture: 2009 Features and Technical Specifications: Professional crosscut, rip, and miter saw Motor Power: 1.8 kW Power supply: 230 V Blade speed: 4,200 rpm Blade diameter: 255 mm Turntable diameter: 328 mm Maximum cutting capacity: 80 × 305 mm Miter adjustment: up to 45° to the left and right, and up to 60° to the right Saw head tilt: from -45° to 45° Locked positions: 0° / 15° / 22.5° / 31.6° / 45° to the left and right, and 60° to the right Cutting capacity at 45° tilt to the left: 42 × 305 mm Cutting capacity at a 45° tilt to the right: 35 × 305 mm Cutting capacity at a 45° miter to the left: 80 × 204 mm Cutting capacity at a 60° miter to the right: 80 × 147 mm Combined cutting capacity to the left: 42 × 204 mm Combined cutting capacity (right): 35 × 147 mm Dimensions L × W × H: approx. 1,200 × 1,130 × 700 mm Weight: approx. 24.2 kg Dkedpfxszy D Agj Aptst Base plate and turntable made of die-cast aluminum Pull function for wide workpieces Laser projection to display the cutting position Workpiece supports that extend on both sides Folding stops for repeated length cuts Adjustable, tall aluminum stops Screw clamp for securing workpieces Adjustable cutting depth limit Fine adjustment of the angle setting Saw blade guard Chip collection bag Easy saw blade change Suitable for cutting ceiling moldings and crown moldings

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dksdjg U Uv Rjpfx Aptjt Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Dkjdpfx Apsff Hdfotet Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. Dodscnw U Dopfx Aptskt All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Djdjzu Akrepfx Aptskt Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: excellent (used), Year of construction: 2022, Wheel diameter 510 mm Cutting height 350 mm cutting width 500 mm Motor output 3,5 kW Table dimensions 640 x 500 mm Table tiltable 0-45 Grad machine weight ab. 295 kg Dksdpfx Asztz R Ueptjt

Condition: used, Unicraft PHW 2508 pallet truck or hand-operated forklift for the internal transport of pallets, mesh boxes and heavy loads. Its robust design, smooth steering and compact build enable reliable and manoeuvrable operation in warehouses, workshops and production facilities. Technical data: Dksdpfeztvvfex Aptjt - Load capacity: 2.5 t - Lifting range: 85–200 mm - Fork length: 1,150 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Djdpfsyak Dljx Aptekt Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Year of construction: 1995, condition: ready for operation (used), There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995. Dkjdpfx Asipv D Ujptjt

Year of construction: 2019, condition: ready for operation (used), Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible. Dkjdpfezcyrdox Aptot

Condition: excellent (used), Year of construction: 2018, VPS 100/2500 cardboard cutting machine – fully functional Fully automatic production of outer packaging from continuous cardboard Application: Packaging of high-quality aluminum rims with precisely fitting packaging to prevent slipping Working width: up to 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.5–7 mm Tool width: approx. 45 mm Operating hours: 13,072 in a single-shift operation Accuracy: Longitudinal cuts: ±0.2 mm Length tolerance: ±1.5 mm/m Packaging size: 600 × 600 × 300 mm Output: approx. 55 s per packaging unit Bottom/lid construction Production of individual packaging for exclusive forged wheels. Bottom with corner locks to hold the rim upright Lid according to FEFCO 0331 If required, development of tightly fitting packaging concepts in consultation with the customer Packaging design Integrated software for creating your own packaging designs Database with approx. 250 packaging designs The machine processes continuous cardboard fully automatically. The patented multi-tool performs creasing, scoring, perforating, and cutting using the single-point principle. The material-friendly creasing technology prevents the cardboard from splitting. Perforations are performed using an oscillating knife with a freely adjustable perforation level. Cuts are made with a toothed knife on a rubberized roller, creating clean, fiber-free cut edges. All tools are adjustable by servomotor. Machine construction Welded construction 6 multi-function tools for longitudinal processing (optional up to 12) 1 transverse processing tool 2 rubberized rollers Segment-controlled overpressure Control: Industrial PC Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) Windows 10 IoT Enterprise Beckhoff TwinCAT 3 21" multi-touch panel Control cabinet integrated Dkjdpozmbi Dsfx Aptot Software functions: Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Monitoring of residual lengths Production data acquisition (CSV) Plain text error messages Automatic cardboard changer Automatic selection of the optimal cardboard web width. Standard with two positions, expandable to six or, with side-by-side function, to up to twelve web widths. Additional cardboard magazines expand the system with additional web widths and have their own sensors and residual length management. Box designer Programming software for customer-side workstations for the free creation and programming of individual cardboard designs. General condition The system is in good overall optical and technical condition. The machine cladding, safety devices and conveyor components are complete and intact. No visible damage, corrosion or significant signs of wear can be detected. Maintenance performed internally by the company via SAP-PM Every 6 months electrically Every 3 months mechanically

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator Dkjdpfx Aoznkx Dsptst If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: Dkjdpfxotpnple Aptet - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Condition: new, Year of construction: 2025, Cutting length: 5100 mm Cutting height: 2200 mm Cutting depth: 60 mm Scoring saw: yes Feed: manual Horizontal cut display: digital Vertical cut display: digital Saw blade diameter: 300 mm Adjustable material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Dsdehpma Eepfx Aptjkt Machine length: 6300 mm Machine depth: 1800 mm Machine height: 3100 mm Weight: 850 kg

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system Djdpfjxxz E Nox Aptekt -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

Condition: good (used), Year of construction: 2021, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums Dodpfjx E Riyex Aptskt -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW -Dimensions: 500/470/H1100 mm -Weight: 10 kg

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation Dkjdownrf Uopfx Aptst - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: reconditioned (used), machine/vehicle number: 2433345525, functionality: fully functional, Suction nozzle, 125 mm Nominal volume flow rate 884 m³/h Motor power 2.2 kW, 16 A Mobile Weight approx. 194 kg L x W x H: 1000 x 840 x 1650 mm Container size 730 x 660 mm Manual vibration Dkjdpfxjiw D U No Aptst