Used Bernardo Ps 250 S / 400 V for sale (91,733)

Condition: excellent (used), Year of construction: 1999, Sliding table saws Longitudinal and transverse saw for ps 400 Longitudinal and transverse saw for ps 400 Second hand 1999 Make: Longitudinal and transverse saw for ps 400 Model: Longitudinal and transverse saw for ps 400 Description: Longitudinal and transverse saw for ps 400 Producer of GOMAD Model / type of the machine ps 400 Year of production 1999 Machine category Longitudinal and transverse saw Main shield adjustable up / down and at an angle shield for the shield with sidecar cutting length on the trolley 1500 mm cutting width at the guide 1000 mm main engine 6 kW dimensions of the top 1020 x 1120 mm with extension Hodpfx Agegap Szoujn with extension with a podcinakiem max diameter of the scoring blade 120 mm scoring spindle diameter 22 mm 0.75 kW scoring engine 3 types of rotation speeds 2800/4000/5000 rpm brake diameter of the extraction port 120 mm dimensions (length / width / height) 250 x 120 x 120 cm weight 935 kg

Condition: new, machine/vehicle number: 408ba9a39bbb8087056d6e563, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° / D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Hjdpfx Agji Ri Dasusn 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of approval / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized

Condition: new, Description: High precision and stability for the highest cutting quality Smooth belt running thanks to balanced flywheels with rubber coating Adjustable HSS precision three-roller guide for the saw blade top and bottom for exact cutting results Two cutting speeds for different applications and materials Precise parallel stop with double clamping and quick fixation Quiet induction motor, maintenance-free and robust Restart protection: prevents unintentional start-up after a power failure Convenient tilt adjustment of the gray cast iron saw table for precise tilt cuts thanks to gear rim guide Quick release lever and tool-free door opening for easy saw blade changes Blade tension indicator with scale for checking the blade tension Tool-free height adjustment of the saw blade guard LED work light to illuminate the interface External suction possible for low-dust work Drawer for easy disposal of the collected sawdust Extendable table extension for safe processing of large Workpieces Cutting radii with circular cutting device (accessory) Regrinding surfaces and curved saw cuts with belt grinding device (accessory) Base frame with wheels for comfortable position changes Technical data: Dimensions: 665 x 980 x 1600 mm Support surface: 560 x 400 mm Working height with base frame: 1000 mm Saw table swivel range: 0 - 45 ° Cutting height: 170 mm Passage width: 307 mm Cutting speed: 410 / 880 m/min Saw band length: 2240 mm Nominal input power: 900 W Output power: 660 W Weight: 79 kg Scope of delivery: Hedpfx Aevwf Naegujn Band saw BAS 318 Precision DNB Universal band saw blade A6 Base frame Parallel stop Angle stop Extraction adapter (for Ø 44, 58, 100 mm) Dust container Push stick

Year of construction: 2014, condition: like new (used), ø 40-250 mm, central clamping Hjdpfjutc Afox Agusn Synchronization of the saw carriage via servo motor. Stroke extension

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Hodoh Rdxnepfx Aguon Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Extraction capacity of filter unit at spigot*: 3550 m³/h (free-eye) Total power consumption*: 0.88 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 73 db(A) Dimensions L/W/H in mm: L 1283 / W 1020 /H 595 Colour: RAL 7035 Weight: 170 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms (oil mist separator). Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. Hsdpfxsh Rdypo Aguon The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements Hjdpjum Uzaofx Aguen - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11115, Foiling machine for PE foil for profiles Hedpfx Aexght Asguen

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. Hsdpfx Ajv Er Nisguon With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Technical data: Manufacturer: Siemens Hedpfxjyv Inuj Agusn Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Mechanical size: 200L Mounting type: B3 Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Condition: excellent (used), For sale: Industrial electric motor by renowned manufacturer KSB Aktiengesellschaft. The motor is in good technical condition and fully operational. It features a robust construction and is designed for demanding industrial applications. Technical specifications: Manufacturer: KSB Type: 1LA7163-4AA66-ZX77 Power: 11 kW Supply: 3~ 400/690 V Frequency: 50 / 60 Hz Speed: 1460 rpm (50 Hz) Protection class: IP55 Insulation class: F Mounting: IM B35 (flange + feet) Hjdpfjyvi Hfox Aguen Cos φ: approx. 0.84 Weight: approx. 85 kg Condition: Used Fully functional Normal signs of use (visible in the photos) Good condition

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Equipment included: • SHINI robot Hsdpey Duzqofx Agujn • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,700 h, pressing force: 337 t, overall weight: 24,000 kg, travel distance X-axis: 800 mm, controller manufacturer: DELEM, controller model: DA-66W, number of axes: 6, This 6-axis GASPARINI PSG 330/4000 Variante C was manufactured in 2007. It features a bending force of 330 tons and a useful bending length of 4100 mm. The machine includes a stroke of 400 mm and an X-axis travel of 800 mm. If you are looking to get high-quality bending capabilities, consider the GASPARINI PSG 330/4000 Variante C press brake we have for sale. Contact us for further details. - Distance Between Uprights: 3600 mm- Stroke: 400 mm- Installation Height: 600 mm- Throat: 500 mm- Approach Speed: 0 - 200 mm/sek- Return Speed: 0 - 125 mm/sek- Working Speed: 0 - 8.5 mm/sek- X-Axis Speed: 300 mm/s- X-Axis Accuracy: ±0.05 mm- R-Axis Stroke: 250 mm- R-Axis Speed: 160 mm/s- R-Axis Accuracy: ±0.1 mm- Z-Axis Speed (Option): 1000 mm/s- Z-Axis Accuracy (Option): ±0.25 mm- Z-Axis Repeatability (Option): ±0.15 mm- Motor Power: 30 kW- Oil Tank Capacity: 420 L- Recommended Hydraulic Oil: Shell Tellus Oil TX 46- Machine Weight: ca. 24 Ton- Table Width: 90 mm- Working Height: 965 mm- Hydraulic Components: Rexroth- Electrical Components: Telemecanique- Pneumatic Components: SMC- Control Unit CNC: Delem DA-66W- Safety System: Nuova Elettronica DFS Laser Beam - RX (Type 4 Safety Device)- Power Supply: 400V / 50Hz- Machine hours: 20,700 / 2,000,000 strokes- CNC controlled Z1-Z2-Z5 with 6-axis control DA - 66 W- Tool holder with upper and lower jaw clamping system Technical Specification Hsdpey U Hwrofx Aguen Bending Length 4100 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 20220915004, fuel type: diesel, motor manufacturer: Perkins 4008TAG3, General information Field of application: Construction Weights Empty weight: 7.970 kg Functional Hsdpfxjx Nl A Nj Aguen Generator capacity: 1.250 kVA Dimensions of cargo space: 455 x 205 x 244 cm CE mark: yes Other information Fuel consumption: 188 Liter / Hour at 75% Load Generator: Leroy Somer 50.2 M6 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 1450 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, The engine is new, unused, and comes from stock. In very good condition, ready for operation. Technical data Manufacturer: EMK Model: KAE2A132M 4B3E2K Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 400 / 690 V Frequency: 50 Hz Efficiency class: IE2 Protection rating: IP55 Duty type: S1 Insulation class: F Design: IM B3 Weight: approximately 54 kg Hsdpfx Agoyv R Nnjuon

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 2,53,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Hodpfjv Uqwdex Aguon Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 300 mm feed: 30-830 / 23-625 mm/min. turning speeds 45 - 1660 U/min distance spindle /table 60 - 460 mm rapid traverse Z Achse 750 mm/min throat 95 - 575 mm total power requirement 3.0 kW weight of the machine ca. 1505 kg range L-W-H 1740 x 1860 x 1900 mm Hjdpfx Aexaak Tegusn - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool

Condition: new, functionality: fully functional, input voltage: 400 V, tool diameter: 50 mm, spindle mount: MK 4, actuation type: electric, rotational speed (max.): 2,200 rpm, rotational speed (min.): 55 rpm, table width: 800 mm, table length: 260 mm, overall weight: 800 kg, Equipment: CE marking, rotational speed infinitely variable, The GB 55 SK NC VARIO drill press is equipped as standard with a large cross table and a 2-axis digital readout, allowing not only drilling but also precise milling operations. The automatic spindle feed and tapping function significantly enhance the capabilities of the machine. Stepless spindle speed adjustment is available within the range of 55–2200 rpm. Thanks to its robust construction and large drilling capacity, this model is well-suited for series or industrial production. The NC version features a programmable controller for setting, among other things, drilling depth, spindle speed, and automated tapping. Drilling capacity is 50 mm, tapping up to M42. Key features: - NC version with programmable controller for setting drilling depth, spindle speed, and automatic tapping, etc. - 6-range automatic spindle feed, adjustable electromagnetically including tapping function - Rigid machine construction ensures vibration-free operation - Powerful drive motor suitable for continuous operation - 2-axis digital display for high machining accuracy Hjdpfxoytfuxe Aguen - Heavy-duty base plate with T-slots and integrated coolant system - Comprehensive standard equipment - Quiet machine operation thanks to hardened and ground gears - Safety covers meet latest CE standards - Automatic tool ejector - Quick tool change enabled by the automatic ejector - Electronic indicators for drilling depth and spindle speed as standard - Stepless speed adjustment Technical Specifications: - Maximum drilling capacity: 50 mm - Drilling capacity in castings: 60 mm - Maximum tapping capacity: M42 - Drill chuck capacity: 1–13 mm / B16 - Spindle taper: MK 4 - Spindle speed min.: 55 rpm - Spindle speed max.: 2200 rpm - Speed change: stepless (55–348/348–2200) - Drive transmission: gear - Automatic spindle feed range: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev - Drilling table tilt: -45° to +45° - Max. distance spindle/column: 380 mm - Max. distance spindle/table: 480 mm - Max. distance spindle/base: 1165 mm - Quill stroke: 210 mm - Column diameter: 150 mm - Table size (width): 800 mm - Table size (depth): 280 mm - Cross table travel (X x Y): 415 x 290 mm - T-slots (number, size): 14 mm - Motor power S1 100%: 3.0 kW - Voltage: 400 V - Dimensions (W x D x H): 1230 x 1240 x 2310 mm - Weight approx.: 800 kg Scope of delivery: - 2-axis ES-12H LCD digital display - Cross table - Drill chuck 1–13 mm / B16 - MK4 / B16 arbor - Reducing sleeves MK4/3, MK4/2, MK3/1 - Coolant system - Tapping mode - Electromagnetic spindle - Automatic tool ejector - LED lighting - Movable guard - Electronic indicators for drilling depth and spindle speed - Stepless spindle speed adjustment

Condition: new, functionality: fully functional, input voltage: 400 V, tool diameter: 32 mm, rotational speed (max.): 3,200 rpm, rotational speed (min.): 75 rpm, table width: 500 mm, table length: 455 mm, overall weight: 340 kg, Equipment: CE marking, The GB 35 HSV bench drill is a professional machine designed for drilling in metal, wood, and plastics. It features a high spindle speed (75–3200 rpm) and comprehensive equipment to ensure precision and work efficiency. Motor power: 1500 W, automatic spindle feed, tilting drill table, cooling system, and LED work light. Standard equipment includes automatic spindle feed Robust base plate for machining large workpieces 2-range motor with 12 speeds up to 3200 rpm Supplied with a 3–16 mm / B16 quick-release chuck Large drilling table with T-slots (14 mm) Simple and quick speed change via lever operation High precision due to ground gear wheels in the transmission Feed operation switched via clutch Reverse function enabling tapping operations Drill head tiltable 180° and rotatable 360° Cooling system and LED lighting included in delivery Technical specifications Maximum drilling capacity: 32 mm Drilling capacity in cast: n/a mm Maximum tapping capacity: M20 Drill chuck: 1–16 mm / B16 Spindle taper: MK 4 Spindle speed min.: 75 rpm Spindle speed max.: 3200 rpm Speed change – number of steps / stepless: 12 Transmission type: Gear drive Automatic spindle feed range: 0.10 / 0.18 / 0.26 mm/rev Table tilting range: -45° to +45° Drill head swing: 180° & 360° Max. spindle-to-column distance: 295 mm Max. spindle-to-table distance: 775 mm Max. spindle-to-base distance: 1185 mm Quill stroke: 125 mm Column diameter: 115 mm Table size (width): 500 mm Table size (depth): 455 mm Base working surface: 375 x 365 mm T-slots (number, size, spacing): 14 mm Motor power: 1.5 / 2.2 kW Continuous duty motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions (width): 630 mm Dimensions (depth): 700 mm Dimensions (height): 2050 mm Weight approx.: 340 kg Scope of delivery Quick-release chuck 1–16 mm / B16 Drill chuck arbor MK 4 / B16 Reducing sleeve MK 4 / 3 Guard Service tools Digital depth display Hedpjytft Iofx Agusn Cooling system LED lighting

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Technical specifications Max. drilling capacity: 32 mm Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Hodpeytdy Tofx Agusn Spindle taper: MK 4 Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools

Condition: new, Year of construction: 2026, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 420 mm, turning length: 1,000 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, overall weight: 1,145 kg, Equipment: rotational speed infinitely variable, The Smart 410 Pro Vario Universal Lathe is a professional machine designed for light and medium-duty turning operations. By combining advanced electronics with robust mechanics, this model provides an ideal solution for mechanical workshops, toolrooms, and maintenance departments. Bed made from cast iron, induction-hardened and precision-ground Mechanical foot brake reduces downtime Removable bridge allows machining of larger workpieces Quiet and smooth operation thanks to hardened and ground gear wheels Simple and quick adjustment of feed and speed Solid construction ensures vibration-free performance Sliding tailstock system for taper turning, handwheel with high-precision scale (0.02 mm) Central switching system for feeds and threading, with leadscrew and feed shaft Modern main spindle bearing with precision angular contact ball bearings 3-axis digital display included as standard Infinitely variable spindle speed adjustment via inverter with digital display for optimal adaptation to the workpiece Centres distance: 1000 mm Centres height: 210 mm Swing over bed: 420 mm Swing with bridge removed: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle nose: DIN 55029, D1-6 Min. spindle speed: 30 rpm Max. spindle speed: 3000 rpm Spindle speed range - number of steps / stepless: stepless (30–550 / 550–3000) Longitudinal feed range: (17) 0.05–1.7 mm/rev Cross feed range: (17) 0.025–0.85 mm/rev Metric threads: (42) 0.2–14 mm Inch threads: (45) 2–72 TPI Tailstock quill diameter: 50 mm Tailstock quill travel: 140 mm Tailstock taper: MT 4 Motor power: 5.5 kW Voltage: 400 V Dimensions (width): 2090 mm Dimensions (depth): 1050 mm Dimensions (height): 1600 mm Weight approx.: 1145 kg Scope of delivery: 3-jaw chuck DK11-200 mm / D6 Hsdpfsyr I Sqex Aguen Face plate 350 mm Fixed steady rest – max. passage 135 mm Travelling steady rest – max. passage 65 mm Coolant system 4-way tool post Micrometric longitudinal stop Threading dial Magnetic brake compliant with CE standards Electromechanical spindle brake Filled with Shell Tellus 46 oil Halogen work light Change gears 2 centering centres Chip tray Service tools 3-axis digital display Infinitely variable spindle speed Legally required safety guards Full operating documentation in Polish CE Certificate 24-month warranty for all components at no extra cost

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device Hsdpsxaazxjfx Aguen - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: new, Year of construction: 2026, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Hedpevxhi Eefx Agujn Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: sendzimir galvanized L-profile dim.: (see below) 298 x 81 mm (4 round holes Ø 9 mm) 250 x 30 mm (one oblong hole) center-center round hole: 278 | 50 mm shelf distance: approx. 250 mm Weight: approx. 0,600 kg / pc. 04x hexagon bolts, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8 Hodpoi Dtcnsfx Aguen General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, Year of construction: 2026, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 56 mm 90º maximum cutting depth 80 mm Hjdpfxjvxhhbe Agujn Movable table travel 620 mm Cutting width on the right side of the saw 610 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 400V Weight 125 kg Dimensions 1090×1330×910 mm Manufacturer: Cormak