Used Cardiomyocyte Analyzer for sale (121)

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Blsdpfx Amsfy T Arjnji Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Bodpfsflq Spex Amnjli Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Bodpfxsfz Dt Ne Amnjli Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. Bljdpsfz I D Djfx Amnji In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. Blodpsfz I Edofx Amnji In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Bedpfsflmdwsx Amnsli - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Bjdpfjfz Nb Tjx Amneli Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Bsdsfz U S Eopfx Amnsli - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, operating hours: 40,000 h, Krones Contifeed Preform Feeder The Krones Contifeed preform feeder is designed for the precise and efficient feeding of PET preforms into the blow molding machine. It operates using a roller sorter system that gently handles preforms of various sizes, ensuring they are properly aligned before entering the blow molder. The Contifeed system offers quick and infinitely variable adjustments, allowing it to accommodate different preform types and sizes with minimal manual intervention. The system is available in three different lengths to match the output of the blow molding machine and includes options for automatic adjustment, making it highly flexible and adaptable to different production requirements. The design also includes features like automatic troubleshooting and easy access for maintenance, ensuring high operational efficiency​. Krones Preform Check Inspector Blodpfjvgvl Rex Amnsi The Krones Preform Check Inspector is a sophisticated, inline inspection system designed to ensure the quality and integrity of PET preforms before they enter the blow molding process. Recognizing that the quality of the final bottle is heavily dependent on the condition of the preform, this system plays a critical role in maintaining high production standards and reducing waste in bottling operations. The Preform Check Inspector utilizes advanced vision technology, incorporating high-resolution cameras and specialized lighting to conduct a comprehensive analysis of each preform. As preforms pass through the inspection station, they are subjected to multiple checks that assess various quality parameters. These include detecting surface defects such as scratches, dents, or contaminants, as well as identifying dimensional inaccuracies like ovality or variations in wall thickness. One of the key features of the Preform Check Inspector is its ability to perform 360-degree inspections. This is achieved by rotating each preform in front of stationary cameras, allowing for a complete examination of the entire surface area. This comprehensive approach ensures that even minute defects, which could compromise the integrity of the final bottle, are reliably detected. The system is also equipped with specialized software algorithms that analyze the captured images in real-time. These algorithms are calibrated to distinguish between acceptable variations and actual defects, minimizing false rejects and ensuring that only preforms that truly fail to meet quality standards are removed from the production line. This precision contributes to optimal material utilization and cost efficiency. Integration with the overall production line is seamless, as the Preform Check Inspector can communicate with upstream and downstream equipment to synchronize operations. In the event of detecting a defective preform, the system can trigger reject mechanisms to remove the faulty item without interrupting the flow of production. Additionally, the system’s data logging capabilities allow for tracking defect rates and identifying patterns, which can be invaluable for quality control and process improvement initiatives.

Condition: new, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMC 80 FD duoBlock Year of manufacture: NEW Control system: Celos with Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1050 mm Z-axis: 850 mm Main spindle: Tool interface: HSK-A 100 Speed range: 12,000 rpm Drive power (100/40%): 52 / 42 kW Max. torque: 430 / 300 Nm Rotary table: Table diameter: 800 x 630 mm Max. table speed: 30 rpm (milling) / 800 rpm (turning) Tool changer: Number of tool positions: 123 Technical features & accessories: - Universal milling head with controlled B-axis - NC milling/turning table with pallet carrier - Rotating pallet changer, 2 pallets - Coolant tank 980 l - Oil and emulsion mist separator system - Chip conveyor - Rotating viewing window - Taper cleaning station with rotating brushes for HSK tool holders - Control panel for the tool magazine of the loading station with a 15-inch TFT screen - Internal coolant system (IKZ), frequency-controlled 10 bar – 80 bar / 31 l/min through the spindle center (AD) - Flushing gun for chip flushing - Cooling device with compressed air through the spindle center - Optical infrared probe Renishaw PP60 (OMP 60) - Tool measurement in the work area Blum Laser DIGILOG - Tool breakage monitoring, mechanical version - 3D quickSET - Sensor package i4.0, consisting of: MPC – Machine Protection Control, SGS spindle growth sensor, IKZ flow monitor - Condition Analyzer - proTIME - 4-color signal light - Operating mode 4 - Accuracy package - Electronic handwheel - Energy meter for CELOS - Safety package for power failure - L-probe package 2 (Renishaw) / L-measurement Blsdpsy U Hlpsfx Amnsi Accessories, illustrated tools and clamping devices are only included in the scope of supply if this is stated in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Year of construction: 1999, condition: good (used), functionality: fully functional, SPECTROLAB M8 SPECTROMETER, designed for analyzing the composition of materials using advanced spectrometry technology. Bsdpfxjzbtvgo Amneli The system enables the identification and analysis of elements and/or the composition of materials for industrial applications, quality control, and material classification. It is used to measure aluminum and copper. • Analysis range/technology: optical emission spectrometer (Spark OES) that measures Si, Fe, Cu, Mn, Mg, Zn, Ni, Cr, Pb, Sn, Ti, Ca, P, Sr, V, Al. The equipment has been operating under normal industrial conditions until 2020. Suitable for material analysis, quality control, and characterization of compositions in industrial environments.

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package Bsdpey Rglnofx Amnjli A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Complete object description can be found in the documents.

Condition: used, CFS CombiGrind 2000/250 grinder-mixer Capacity: 2000 l Throat diameter: 250 mm Power: 75 kW Electrical supply: 400 V 50 Hz Dimensions: 3200 mm x 1900 mm x 2800 mm Bljdpfx Aey Alwgemnsi Equipped with an infrared MultiTrack analyzer. It analyzes fat, protein, and water content in meat.

Condition: new, Year of construction: 2026, travel -z axis 1200 mm travel -x axis 360 mm Weight 3250 kg NESTO 4 Axis Pro Cnc Wood Lathe Machine TECHNICAL SPECIFICATIONS - Work Piece Dimension Max Diameter 360 mm - Max length 1200 mm - Control Unit TPA Control Unit (ltalian) - Z Axis Movement 1200 mm - X Axis Movement 360 mm - Long Axis Speed (Z) 70 m/min - Short Axis Speed (X) 30 m/min - Vertical Axis Speed (Y)20 m/min - Lathe RPM 4500 rpm (Direct Drive) - lnstalled Power 20 KW - Lubrication Unit ILC Automatie Lubrication - Piece Clamping Pneumatic Piston (7 Bar) - Piece Length AdjustmentEasy adjustment with remote control (keyless, boltless) - Cutting Blade Hardened Triangle Blade Made of Special Steel - Cutting Blade Hardened Rounded Blade Made Of Special Steel - Cutting Blade Debarker Blade - Spindle Motor ATC (Automatie tool changer) 24000rpm spindle (5 Pcs tool changer) - Drawing Program ltalian Cad-Cam Program Special for Our Machine (Pegasus 4 Axis Cad & Cam Program) - Machine Dimension Length: 3870mm * Width:2450mm * Highest: 2150mm - Weight 3250 kg GENERAL SPECIFICATION High-resolution Panasonic Japanese servo motors are used in our machine. The axis that rotates the part has the "Direct Drive" function and can work with a 5 kW servo motor at 4500 rpm. Precision ball screws and nuts are used in all axes. Workpiece length setting can be adjusted with a single knob. This ensures time savings and long-term linearity of the tailstocks. The control unit has a remote control function. In addition, with functions such as job sequencing, detailed reports and display of the three- dimensional state of the workpiece, the TPA control offers the user great convenience. Structure Of Chassis With its reinforced, vibration-free and stable chassis design, it provides accuracy over long production cycles and remains reliable for your machining needs. lt has an impressive frame design that provides reliable precision in operation. Ax1s Movements All axes are driven by servo motors. They allow precise acceleration at high speed. High quality and high precision rails, carriages and racks are used to prevent the movement of the axes from being affected by the slightest vibrations. Central Automatie Lubrieation Unit Automatie Tool Measurement Unit lt is a unit that makes an automatic measurement to measure the length of the cutter located at the end of the spindle motor and milling in the Z axis with the correct dimensions, and can store this information through the control unit. lt offers a convenience that eliminates the need for the user to enter measurements during the change of cutter. Tpa Control Unit (ltalian) TPA control unit has Windows based industrial computer. lndustrial computers enable trouble-free operation in the most demanding conditions. Main features of TPA Controller: lt has Ethercat communication system. -Detailed reporting is available. -lt provides ease of use thanks to its specially designed interface. Thanks to its built-in wireless feature, it allows remote access by connecting to the internet. In this way, you can receive your after­sales support needs instantly from our after Sales Team. CAD/CAM SOFTWARE/ PEGASUS CAD & CAM Cad/Cam Software/ Pegasus Cad & Cam Bedpfxeyk Ia Ss Amneli lt is a specially designed Cad Cam program to be used in our machine. Pegasus Cad Cam Drawing program is a versatile software that can be used by designers and engineers to create, modify and analyze 3D models. This softwa...

Condition: used, This listing is for the AATI Fragment Analyser capillary electrophoresis system The unit is in full working condition and is ready for immediate use The AATI Fragment Analyzer is an advanced automated capillary electrophoresis system designed for precise analysis of DNA and RNA fragments. Developed by Advanced Analytical Technologies Inc. (AATI), the instrument provides high-resolution sizing, quantification, and quality assessment of nucleic acid samples. Widely used in genomics, molecular biology, and next-generation sequencing workflows, the system streamlines fragment analysis by replacing traditional gel electrophoresis with a faster, automated process. It allows laboratories to process multiple samples simultaneously, delivering reproducible results with minimal manual intervention. The instrument supports a variety of assay kits for DNA and RNA analysis, enabling applications such as NGS library quality control, PCR fragment verification, and RNA integrity assessment. With integrated software for data analysis and reporting, users can easily visualize fragment distribution, concentration, and size profiles. Key Features: Automated capillary electrophoresis for DNA and RNA analysis Bedeyr Nl Sepfx Amneli High-resolution fragment sizing and quantification High-throughput sample processing Ideal for NGS library QC, PCR product analysis, and RNA quality checks User-friendly software with clear electropherogram and gel-style outputs The AATI Fragment Analyzer is a reliable solution for laboratories requiring accurate nucleic acid fragment analysis with improved efficiency and reproducibility

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! Bledpfskwct Ujx Amnji ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2025, condition: new, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Efficiency, high productivity, and good customer communication are our top priorities. Accordingly, we focus on existing machines on the market, analyzing and optimizing problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Power: 50 Hz 360 V Power consumption: 1.64 kW Air pressure consumption: 1 m3/10 bar / 1 min. Peeling: 40 - 80 pieces / min Blsdpjrci U Hsfx Amnsi Peeling diameter: 35 - 100 mm of unsorted onions

Condition: good (used), Year of construction: 2015, Manufacturer: LAR Model: QuickTOCultra Description: TOC Analyzer Year of manufacture: 2015 Bsdpew I Ddhjfx Amnjli

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Bsdpfsyhfg Dex Amnoli Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Year of construction: 2025, condition: new, Autonomous RS1 and modular RS2 containers in the CompoFlow system represent the latest solutions for the biological processing of organic waste. Designed for mobile and decentralized biowaste collection (RS1), as well as stationary operation at composting facilities (RS2). Perfect for ensuring a controlled process of composting, biodrying, and biostabilization, along with efficient organic waste logistics. Each composting system is tailored to the individual needs of the client. After analyzing the material intended for processing, we specify the required number of containers and the necessary composting capacity. Made in Poland – Eco-friendly – Durable – Certified – EU compliant Composting significantly increases recycling rates. Bledpfx Asikq Eyjmnsi RS TEAMTECH Sp. z o.o.

Condition: used, functionality: fully functional, Agilent 7500 Series G3155A Inductively Coupled Plasma Mass Spectrometer. The Agilent 7500 ICP/MS (Inductively Coupled Plasma Mass Spectrometer) is a cutting-edge analytical instrument known for its exceptional sensitivity and performance. With detection limits that go down to parts per trillion for most elements, the 7500 ICP/MS offers unparalleled sensitivity, enabling the accurate quantification of trace elements in various sample matrices. The instrument's wide dynamic range spans from sub-ppt to high ppm levels, accommodating diverse sample concentrations without compromising accuracy or precision. Capable of analyzing up to hundreds of samples per day, the 7500 ICP/MS provides rapid throughput, facilitating high-volume sample analysis in research, environmental monitoring, and industrial applications. Featuring robust interference removal capabilities and excellent stability, the instrument delivers highly accurate and precise quantitative results, ensuring confidence in analytical measurements. The Agilent 7500 ICP/MS is compatible with various sample introduction systems, including autosamplers and chromatographic interfaces, allowing for the analysis of complex sample matrices such as biological fluids, environmental samples, and geological materials. The Agilent 7500 ICP/MS is the instrument of choice for laboratories and research facilities requiring sensitive, fast, and quantifiable elemental analysis across a wide range of applications, including environmental monitoring, geochemistry, pharmaceutical analysis, and materials science. Blodpouaxzisfx Amnoi Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, OlympusIX70-S8F Inverted Fluorescence Phase Contrast Microscope. This Olympus IX70 microscope is capable of phase contrast, DIC, and fluorescence. It comes with an ergonomic tilting binocular head with 10x eyepieces. The microscope has a front and side photo port for adding a camera. The 0.5 N.A. condenser has DP10 and DP20 DIC prisms and Ph1, PhC phase annuli installed with the IX-LWPO polarizer. The 5 position fluorescence turret contains WIBA, and NU fluorescence filters. Also included is the IX-AN analyzer and U-DICT DIC prism. The microscope has a built in 1.0x / 1.5x mag changer. Bljdpfjuax T Sox Amnoi Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Mettler Toledo ReactIR-4000 AUTOCHEM Spectrometer S-1206-0900A MCT Mid-Band Detector FTIR Analyzer Lab with S-1506-0001A Power Supply with Software. In situreal-time data collection- Investigate chemistry and processes in real-time, directly in reactor. Mid-infrared technology - Deduce reaction pathways, mechanisms and kinetics with the spectral information. ReactIRTMReaction Analysis Software - Determine reaction performance, conversion, completion. Analyze and monitor virtually all classes of chemical reactions. Sealed Optics - Operates safely in fume hoods, mounted either on bench top or wall. CompactTower Design - Preserves valuable lab space. Bsdeua Hdrepfx Amnjli Product Specifications: Mid FTIR (4800 to 450 cm-1) analyzer Compact size Sealed optics Temperature stabilized Pinned in-place detector modules Good working condition. Please check out our other listings as well.

Condition: excellent (used), Brabender Model: 920000 Brabender AQUATRAC® Station – Moisture Analyzer – Laboratory with Precisa Analytical Balance 0.1 mg – 120 g For sale is an AQUATRAC® Station by Brabender Messtechnik – a professional laboratory device for precise determination of water content in powders, granulates, and other solid materials. The device is ideally suited for quality assurance, research, and production, and is used worldwide in industrial and laboratory settings. Features: • Precise thermogravimetric moisture measurement • Integrated touchscreen • Internal data storage • USB and Ethernet interfaces • Robust industrial/laboratory construction Technical data: Model: 920000 Year of manufacture: 2019 Mains voltage: 85–265 V AC Frequency: 47–63 Hz Power consumption: approx. 0.6 kW Connections: 3× USB, Ethernet Dimensions: approx. 60 × 45 × 35 cm (W×D×H) Weight: approx. 30–35 kg Precisa Analytical Balance 0.1 mg – 120 g Description: For sale is a high-precision analytical balance from Precisa (Switzerland), 321 LS Series / Type 120A. The balance is ideally suited for laboratories, pharmacies, research, industry, or education. Thanks to the enclosed glass draft shield, very precise and stable measurement results are possible – even for the smallest weights. Technical data: Max weighing range: 120 g Readability: 0.0001 g (0.1 mg) Minimum weight: 0.01 g Digital display Bjdpfeyayuyox Amnoli Tare function RS232 interface Power supply: 12 V DC / 6 W Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Bodpfx Aswnxupsmneli Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.