Used Citizen M16 Iii for sale (1,184)

Condition: good (used), Year of construction: 1998, Striebig Automat III TRK, manufactured in December 1998 Technical details: Power: 4.4 kW (5.98 hp) Input voltage: 400 V Input current: 12 A Cutting height (max.): 2,200 mm Iedpfjznncmex Adletl Cutting width (max.): 4,300 mm Saw blade diameter: 300 mm Speed (min.): 4,750 rpm Overall length: 5,400 mm Total weight: 1,000 kg Location: available from stock in 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Iedpfx Aezlktpjdlstl Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Travel : 205 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] Itedpfx Aowh Ac Dsdlel SECONDARY OPERATION - Number of positions : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.269 x 1.160 [mm] - Machine height : 1.693 [mm] - Machine weight : 1.800 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : IEMCA Genius 118 - Number of turning tool holders : 4 - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 4 Itjdpfxeuhaw Is Adlel - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12 [mm] - Max. machining length : 135 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12 [mm] - Z stroke : 120 [mm] - Spindle speeds : 7000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 5 END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500 X 770 [mm] - Machine weight : 1400 [kg] EQUIPMENT - CNC : Fanuc - 3 colors status lamp - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Electric transformer

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Bobst Media III A 2 Matic – in good condition! Year of manufacture: 2000 4-point system Crashlock HHS ULT300 Itodpfx Aezxxg Dsdljl A wide range of attachments/elements are available for adjusting the machine. The machine can be viewed and tested during operation.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, turning length: 200 mm, spindle speed (max.): 15,000 rpm, controller model: Fanuc Series 31i, counter spindle speed (max.): 10,000 rpm, Equipment: bar feeder, TECHNICAL DETAILS Maximum bar diameter: 16 mm Maximum turning length: 200 mm Main spindle speed: 15,000 rpm Sub-spindle speed: 10,000 rpm Main spindle drive: 2.2 / 3.7 kW Sub-spindle drive: 0.55 / 1.1 kW Number of axes: X1, Y1, Z1, Z2, C1, C2 MACHINE DETAILS Control unit: Fanuc Series 31i Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,610 x 1,050 mm Ijdpsywu Ecsfx Adlotl Machine weight: 1,950 kg EQUIPMENT Fully functional C-axis on both spindles Bar feeder: IEMCA Genius 118 Type 37 LL Guide bushings (complete set) Fixed and driven tool holders High-pressure pump: 20 bar / 2 channels Comprehensive set of guide bushings Bushings for IEMCA bar loader in various diameters

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Itsdpfx Asxw Uqvedlsl Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 215 mm, travel distance Z-axis: 762 mm, overall weight: 3,300 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details. • Swing over table: 220 mm Itodpfxezuy T Ds Adljl • Distance between centres: 500 mm • Maximum machining diameter: 200 mm • Maximum workpiece weight between centres: 50 kg • Maximum workpiece weight in chuck: 20 kg • Grinding wheel dimensions: Ø305 × 25 × Ø127 mm • Grinding wheel speed: 1,880–2,210 rpm • Maximum peripheral speed: 30 m/s • X-axis rapid feed: 4,000 mm/min • Grinding head swivel angle: ±30° • Z-axis rapid feed: 8,000 mm/min • Minimum input increment: 0.0001 mm • Workhead spindle: Combined dead and live spindle • Workhead centre taper: MT No. 3 • Workhead through-hole diameter: Ø18 mm • Workhead speed: 10–500 rpm • Workhead swivel angle: +30° to -90° • Tailstock spindle travel: 20 mm • Tailstock centre taper: MT No. 3 • Coolant tank capacity: 120 litres • Lubricant tank capacity: 3 litres • Machine dimensions: 2,851 × 1,735 × 1,710 mm • Power supply: 200 V, 50 Hz, 3-phase, 3-wire • Total connected load: 15 kVA / 10.5 kW • Maximum full-load current: 50 A • Largest motor: 5.5 kW / 22 A • Control circuit: AC 100 V / DC 24 V • Condition: Operational

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Itodpoz Ata Hefx Adlol Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2000, loading space width: 40 mm, total length: 9,400 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Year of construction: 2000, Equipment: ABS, = Additional options and equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Drum brakes = Notes = 2000 Van Hool 20FT/30FT ADR (EX/II, EX/III, FL, OX, AT), ABS/EBS, SAF axles with drum brakes, 1st axle is a lift axle, 385/65-R22.5 tires (L: 4/13/8mm; R: 6/14/7mm), unladen weight 3,950 kg, max. gross weight: 39,000 kg, Dutch registration. = Further information = General Information Mileage: 228,518 km Registration number: OG-37-KJ Axle configuration Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 25%; Tyre tread right: 40% Rear axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 90% Rear axle 3: Tyre size: 385/65 R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 45% Weights Unladen weight: 3,950 kg Payload: 35,050 kg Gross weight: 39,000 kg Iodpfxez Dbg Us Adletl Functionality Body brand: Van Hool 3B2015 Condition General condition: average Technical condition: average Visual appearance: average Further information Please contact Arne Honingh for more information.

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW Itjdjy Dc I Sjpfx Adljl • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: used, mileage: 2,60,959 km, power: 100 kW (135.96 HP), first registration: 02/2016, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro5, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Hello! We are pleased to welcome you. We would like to offer you the following vehicle with the equipment listed below: Please be sure to include your telephone number in your message! * Driver's cab seats: double passenger seat, multi-functional with storage compartment * Glove compartment with cooling function * Airbag on driver's side * Exterior mirrors, electrically adjustable and heated * Anti-slip regulation (ASR) * Body/superstructure: platform body, double cab * Engine: 2.3 L - 100 kW dCi diesel * Wheelbase: 4332 mm Itedpoz Dqc Sefx Adlsl * Smoker's package * Low emissions according to emission standard Euro 5 * Seat cover/upholstery: fabric * Seats in the driver's cab: 2nd row, 4-seater bench * Seats in the driver's cab: driver's seat, height-adjustable * Start/stop system for engine * Heat-insulating glazing Our services: - Fresh TÜV (technical inspection) + emissions test - Nationwide delivery - Test drive possible at any time - Attractive financing options - Vehicle trade-in Opening hours also on Sundays by appointment.

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 in very good condition. Itedpfx Adjzpyq Ejlol

Condition: used, functionality: fully functional, Year of construction: 1966, Mechanical plate shear Manufacturer: Scharringhausen, Type: KS/S 2.100x5 Itodpfjz Ayyysx Adljl Year of manufacture: 1966 Technical data Manufacturer: Scharringhausen Type: KS/S-III Year of manufacture: 1966 Sheet width: 2,100 mm Sheet thickness: 5.00 mm Horsepower: 15 Voltage: 380 Rounds per minute: 1450 Dimensions: L 3,700 x W 1.20 x H 1.60 m Weight: approx. 2 tons Equipment - Wiring diagram - Foot pedal All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, overall weight: 3,200 kg, This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm Itsdpfx Aoyi Einodlsl • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7000 rpm • Max. Back-spindle power: 2 kw • Gang rotary tool: 5 fixed tools • Turret tools: 10 positions • Bar feeder: iemca boss 332 e/r type 37ll • Equipment: chip conveyor.

Condition: like new (used), functionality: fully functional, Z1015201800 Z1010880270 Itjdoxy I D Uepfx Adlol etc.

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 RMVI-3030-1-014 RMVI-3030-1-013 RMVI-3030-1-012 RMVI-3030-1-011 Isdpjxy Imiofx Adlotl MR-2002-4-27

Condition: used, Year of construction: 2011, Slider length: 3000 mm Itjdpfx Adszdza Dslel Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Year of construction: 2021, condition: excellent (used), Latest model Tomra Odenberg Halo III optical grader. Perfect for sorting greens, misshapes, mechanical damage, surface blemishes and size outliers. Very low running hours, only used for a short time and then put in to dry storage. Rare opportunity - find another one as new as this. Itodexvt Htopfx Adlsl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 21047A, spindle speed (min.): 10,000 rpm, turning length: 210 mm, overall weight: 2,050 kg, bar passage: 20 mm, equipped with Iemca Boss 338HD/32 barfeed new in 2017 – fixed and rotating bushing – evacuation of long pieces through the sub spindle + external apparatus – chip conveyor – some collets and guide bushings – Fanuc 32i-B Control. Iodpswt Th Isfx Adletl

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Itedpfx Adoz Dhnrelel Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Itedpfxoznc S Aj Adljl Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: excellent (used), Year of construction: 2004, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex 200 MkIII • Control: Mazatrol PC Fusion 640 MT Pro • Year: 2004–06 • Serial No.: 169996 • Network: LAN connection • Condition: The machine is in very good technical condition and has been very well maintained. • Mainly used for machining aluminium and plastic. • Max. turning diameter: 530 mm • Max. turning length: 1,000 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 580 mm • Y-axis: 160 mm • Z-axis: 1,045 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW • C-axis: 360° full interpolation Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant B-axis • Angular range: -30° to -190° • Full indexing Tooling and Magazine • Tool magazine: 40 positions • Tool measuring arm: Yes • Tailstock: MT5 Auto • Chuck: Kitagawa B-210, 10-inch 3-jaw chuck • Collet chuck: SMW AUTOBLOK KSB-MB-A60 Itsdpfxezwhdco Adlol • Smartshift BASE quick coupling for robot • Parts catcher: Yes • Parts collector: Yes • Chip conveyor: Mayfran • Bar feeder: STC Super 65 Included Documentation • Photos of the machine • Video of the machine in operation • Service history (photo) • Manuals • Electrical diagrams • Complete machine manuals • Complete programming manuals • Complete maintenance manuals Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 1,000 mm length • 40 tool positions • Through-spindle coolant • Integrated robot interface (Smartshift BASE) • STC Super 65 bar feeder

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Ijdpfx Ajy Ar Niedljtl Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer Iedpfxoywlifo Adletl High quality books with sharp spine definition Comprising: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt