Used Co2 Reducer for sale (3,935)

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bedpfx Ajvvkfdobtjll

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Processing System: Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications. -Material Compatibility: -Mild Steel, Aluminum, Stainless Steel. -Working Thickness Range: -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. Bodji E Tkaspfx Abtell TFON – Excellence in Edge Processing and Surface Preparation.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, warranty duration: 12 months, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement Bsdpsh D Rnhsfx Abtoll - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish , English)

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions. Bedpfxsxu Dipo Abtell

Condition: used, machine/vehicle number: LC534, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) Bjdpfx Abovxz Alotoll The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles. Drying Tunnel CAMES TNN1 (2001) The drying tunnel blows high-efficiency air over the bottles, thoroughly drying them before they move to the next production step. Thus, this step ensures that the bottles are ready for labeling and packaging. Capsule Distribution and Application Capsule Distributor NORTAN (1997) The distributor feeds capsules continuously to the capsuling machine, thereby minimizing dow...

Condition: new, Year of construction: 2026, The TRM Series Turbo Mills is an advanced grinding system used primarily in the recycling of electronic boards and cables for the effective crushing and grinding of these materials. Plastics, metals, and other components found in electronic boards and cables are reduced to fine particles and transformed into recyclable raw materials thanks to this machine. With its high-speed rotors, the Turbo Mill carries out the grinding process, reducing materials to micron sizes through friction and impact forces. ✅ Superior Grinding Performance – Friction & impact forces ensure ultra-fine particle sizes. ✅ High-Speed Rotors – Maximum efficiency in material reduction. ✅ Durable & High-Efficiency – Designed for continuous, long-term operation. ✅ Eco-Friendly & Sustainable – Ideal for electronic waste recycling. 🔸 Choose the Right Model for Your Needs! Technical Specifications 🔹 TRM S1 Power: 15 kW Rotor Diameter: 380 mm Length: 1420 mm Width: 700 mm Height: 700 mm Weight: 660 kg 🔹 TRM M1 Power: 30 kW Rotor Diameter: 500 mm Length: 1680 mm Width: 820 mm Height: 920 mm Bsdpfov Hm S Iox Abtell Weight: 870 kg 🔹 TRM L1 Power: 45 kW Rotor Diameter: 620 mm Length: 1790 mm Width: 940 mm Height: 1040 mm Weight: 1000 kg

Condition: new, Year of construction: 2026, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications. -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety. -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality. Key Specifications: -Minimum Material Size: 80 × 80 mm. Bjdpfx Absqzxhyetjll Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. Bodpfjvlwkxex Abtsll 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Condition: used, Year of construction: 2009, Horizon VAC-100m Air-Suction Collator Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacity without investing in completely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Key Features: Cost-efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and allows you to expand existing systems efficiently. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly expand your collating capacity to up to 60 stations. This enables efficient handling of large jobs and a significant increase in your production capacity. Reliability: With error prevention features such as misfeed, double-feed, and jam control, the VAC-100m ensures that your production runs smoothly and without interruptions. Specifications: - Technology: Touch & Work (via VAC-100a) - Number of stations: 10 per tower - Expandability: Up to 6 towers (60 stations) - Error prevention: Misfeed, double-feed, and jam control - Job memory: 9 storage slots for repeat orders - Programs: Double cycle (non-stop operation), sheet insertion (single and double), booklet making program, block program, selective collating - Sheet size: Max. 500x350 mm; Min. 148x120 mm - Paper weight: 40-250 g/m² - Loading capacity: 55 mm per station - Performance: Up to 9,500 sets/h - Power: 230V; 50/60Hz - 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Bjdsu Sy Uuopfx Abtsll Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Complete meat grinding set The set on offer is a complete meat grinding station built around the NOMA NOWICKI W-130 AL angle grinder, manufactured in 2025. Besides the grinder itself, the set includes a W-130 column bin lift that makes it easy to load raw material directly from bins into the machine’s throat, W-130 tool trolleys, a complete set of sieves/plates, and spare parts, making the offer a ready-to-use, self-contained production station. How does the NOMA NOWICKI W-130 AL grinder with bin lift work? Meat raw material is placed in a tool trolley, which is then raised by the column bin lift and tipped directly into the grinder’s feed hopper, eliminating manual carrying and lifting of heavy raw material. Inside the machine, raw material is moved by a feed screw to the cutting assembly, where knives and sieves/plates (selected according to the desired grind size) reduce it to a uniform structure ready for further processing — meat batters, stuffings, sausages, or burgers. The angle design of the W-130 AL grinder allows for a compact station layout and ergonomic operation, while its solid stainless and acid-resistant steel construction makes it easier to maintain a high hygiene standard. Key advantages of the NOMA NOWICKI W-130 AL set The column bin lift significantly streamlines raw material logistics at the station, reducing operator physical strain and shortening the time needed to load successive batches of meat. The addition of W-130 tool trolleys allows smooth movement of raw material between production stages, and the included set of sieves/plates enables quick changes to the grind size of the processed product without needing to purchase additional tooling. Manufactured in 2025, the set on offer is virtually new, and the included spare parts provide extra assurance of continuous station operation from the very first days of use. Technical specifications of the NOMA NOWICKI W-130 AL set NOMA NOWICKI W-130 AL grinder Manufacturer: NOMA Nowicki Machinery Model: W-130 AL Serial number: 08025235 Year of manufacture: 2025 Powe: 13 kW in 1st gear, 20 kW in 2nd gear Power supply: 3 x 400 V / 50 Hz Grinder dimensions (L x W x H): 1650 x 1550 x 1670 mm Bodpfx Abezxf Afetsll Construction material: stainless and acid-resistant steel Compliance: CE, Made in EU Set components W-130 column bin lift – dimensions: 1150 x 1200 x 2850 mm W-130 tool trolleys Complete set of sieves/plates Spare parts Overall set dimensions (L x W x H): 2350 x 1750 x 2850 mm Application of the NOMA NOWICKI W-130 AL set The set is used in meat processing plants, butcheries, slaughterhouses, and facilities producing stuffings, sausages, burgers, and pâtés — wherever, in addition to the grinding itself, efficient logistics of feeding raw material into the machine matter. The column bin lift makes the station well suited to working with large batches of raw material delivered in transport containers.

Condition: as good as new (ex-display), machine/vehicle number: MCC101A260T7E00B, Manufacturer: Danfoss Product type: VLT MCC 101 sine-wave output filter Type code: MCC101A260T7E00B Part number: 130B4125 Input/output voltage: 3 × 525–690 V Rated current: 260 A at 50 Hz Rated current: 246 A at 60 Hz Rated current: 195 A at 100 Hz Frequency: 50/60 Hz Maximum output frequency: 100 Hz Switching frequency: 2 kHz Inductance: 480 µH Capacitance: 198 µF Power loss: 1,300 W Protection class: IP00 / open chassis Maximum ambient temperature: 45 °C Weight: approximately 315 kg Serial number: 000168-423 Made in Germany Bjdpfx Abjzw Enxetell CE and UL marked The Danfoss VLT MCC 101 sine-wave filter is designed for installation on the output side of a frequency converter. It suppresses the switching-frequency component and provides a near-sinusoidal motor voltage, reducing stress on motor insulation and bearings as well as audible motor noise. Suitable for industrial high-power drive applications and use with compatible Danfoss VLT frequency converters. Condition: Surplus unit. Please refer to the photographs for the actual condition and scope of supply. The buyer is responsible for verifying compatibility with the intended frequency converter, motor and application.

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, number of axes: 3, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets Bjdpfx Absyffgrjtoll • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Blodpfx Aszm Hr Rsbtjl Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: used, Year of construction: 2003, Technical details: x-travel: 3600 mm y-travel: 900 mm z-travel: 820 mm b-axis: -100 - +100 ° control: Siemens 840 D tool changer with: 30 Plätze rapid traverse:: 100 m/min rapid traverse:: 60 m/min. table-size: 4200 x 900 mm table load capacity: 4200 kg total power requirement: 92 kW Weight approx.: 30 t Blodpfezi Nc Rjx Abtjl dimension machine xH: 4,6 x 8,7 x 3,3 m The DECKEL MAHO DMF 360 Linear is a highly dynamic 5-axis travelling-column machining center designed for the complete machining of large and heavy workpieces. Thanks to the linear drive in the X-axis, the machine achieves very high rapid traverse speeds and reduced non-productive times, making it particularly suitable for toolmaking, mold making, and general mechanical engineering. Travelling-column design for high stability when machining long workpieces Linear drive in the X-axis with rapid traverse speeds up to 100 m/min 5-axis machining with NC swivelling milling head (B-axis) Large travels for machining components longer than 4 meters High precision through direct measuring systems and thermally symmetrical machine design *

Condition: used, Year of construction: 2008, Technical details: voltage: 400 V/A total power requirement: 26 kW weight of the machine ca.: 690 kg coolant device: 134a dimensions L x W x H: 1,75 x 0,8 x 2,0 m The Riedel L16/29-TR3.24 cooling unit is an industrial water chiller manufactured by Riedel Kooling (Glen Dimplex Deutschland GmbH). It is commonly used for cooling laser machines, for example in TRUMPF laser systems. Device type: Industrial water chiller / laser chiller Bedpfxjyt Na So Abtell Application: Cooling of CO2 lasers, machines, and industrial equipment Design: Air-cooled liquid chiller Refrigerant: R134a *

Year of construction: 1992, condition: used, Technical details: x-axis: 150 mm z-axis: 400 mm diameter: 420 mm air pressure - required: 6 bar tool diameter: 420 mm total power requirement: 0,5 kW weight of the machine ca.: 290 Kg space requirement approx.:: 2,0 x 1,5 x 2,0 m Tool Holders Included: SK50 Tool Holders SK40 Tool Holders VDI50 Tool Holders The ZOLLER V420 is a high-precision tool presetting and measuring machine designed for the accurate measurement and presetting of cutting tools used on CNC milling machines, machining centers, and CNC lathes. By measuring tools outside the machine, setup times are significantly reduced, machine productivity is increased, and machining accuracy is improved. Main Applications ·Tool length measurement ·Tool diameter measurement ·Radius measurement Bledszbrtdspfx Abtjl ·Cutting edge position measurement ·Tool angle measurement ·Runout inspection ·Measurement of milling, drilling, and turning tools Advantages ·Reduced machine downtime ·Faster setup procedures ·Increased productivity ·Improved machining accuracy ·Reduced scrap and setup errors ·Reliable transfer of tool data to CNC machines Typical Features ·High-precision optical measuring system ·Digital measurement display ·Tool holder interface for various systems (SK, BT, HSK, etc.) ·Data transfer to CNC controls ·Tool data management ·High repeatability and accuracy Typical Areas of Use ·Tool rooms ·CNC machining centers ·Manufacturing facilities ·Precision engineering ·Quality control departments *

Condition: used, Year of construction: 1999, Overview This SASIB SIMONAZZI (today SIDEL) EUROSTAR 80/20 is an isobaric rotary filling and crown-capping monoblock for glass bottles, equipped with 80 filling valves (pitch 110 mm) and a 20-head Arol crown capper. The machine currently fills cider and carbonated soft drinks at up to 8 g/l CO2 in glass formats from 25 cl to 1.5 L. It is still installed and under power, remains in production until end of October 2026 (week 43), and can be visited in operation on request. Technical data - Manufacturer: SASIB SIMONAZZI (today SIDEL) - Model: EUROSTAR 80/20 - Year of manufacture: 1999 - Machine type: isobaric filler capper (monoblock) for glass bottles - Filling valves: 80 (pitch 110 mm) - Capping: 20 Arol crown heads, crown 26 and crown 29 (2 cap distributor bowls) - Products: cider, carbonated beverages (up to 8 g CO2) - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 22,000 bph (25-50 cl), approx. 16,000 bph (75 cl), approx. 12,000 bph (1.0-1.5 L) - Dimensions: approx. 560 x 430 x H 305 cm - Weight: approx. 13,700 kg - Power supply: 27.11 kW installed - Air supply: 8-12 bar, approx. 795 Nl/min Equipment - Format change parts for the listed formats (star wheels, guides, conveyor curves) - Spare parts package - OEM technical documentation and machine layout drawing Not included: cap feeding system, CIP, product mixer. Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Bodpfx Aozic Efobtsll Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2015, functionality: fully functional, Heavy-duty pallet decoiler with integrated precision straightening head, designed to feed coiled strip material into stamping lines and other downstream processing. The large 1500 mm rotating table handles full pallet-mounted coils up to 3000 kg, while the 9-roll straightener (5 lower driven + 4 upper) ensures a flat, stress-relieved strip ready for production. Both turntable and straightener are independently driven via frequency inverters, allowing precise speed and tension control. Ideal for stamping operations where coil material is delivered on pallets rather than mandrels — eliminating the need for separate coil cars and reducing changeover time. Technical Specifications Table diameter 1500 mm Table load capacity 3000 kg Max. table rotation speed 10 rpm Bledpfx Abjzav Ngjtol Strip speed 10 m/min (at core Ø 300 mm) Stamping direction Left to right Winding direction CW or CCW (selectable) Max. strip thickness 1.5 mm Max. strip width 220 mm Turntable drive motor 2.2 kW, inverter-controlled Turntable bearing Four-point bearing Straightener head 9 rolls (5 lower + 4 upper) Roll diameter 40 mm Lower rolls All driven Straightener drive motor 0.75 kW, inverter-controlled Electrical connection 3×400V + N + PE, 50 Hz, 16 A Dimensions (L × W × H) 2250 × 1500 × 1700 mm Weight ~750 kg Paint finish RAL 7035 light grey, structured

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Bedpfx Aezvc N Rebtell Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: good (used), Tool holder, milling holder, milling tool Bjdpfxsc Il Exe Abtoll -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 7x recordings available -Price: per piece -Total length: 155 mm -Weight: 0.8 kg/piece

Condition: used, Year of construction: 2004, machine/vehicle number: SO137, Used Sidel Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel Combiblock is a synchronized blow-fill-cap monoblock engineered for high-efficiency, reliable, and high-quality container production within used bottling lines and industrial packaging environments. Built in 2002, this integrated system combines a rotary PET blow molder, a high-precision gravity filler, and a robust capping turret into a single space-saving frame. The blowing section features 16 cavities for continuous operation and is equipped with an air recovery system to improve energy efficiency. The filling zone includes a pressurized clean cabin with filters, while the capping system handles advanced tethered closure profiles. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: Sidel / Arol CombiModel: SBO 16 Series 2 (Blower) + Sidel ALSIM (Filler) + Arol (Capper)Year: 2004Machine type: Synchronized Combiblock (Blow-Fill-Cap)Container material: PET BlowerCavities: 16 (molds not included)Blower Type: RotaryNeck finish set: AlaskaAir Recovery System: IncludedChiller: Not includedFiller Valves: 63 mechanical valvesFilling Type: Gravity fillingRotation Direction: Counter-clockwiseHygienic Enclosure: Pressurized cabin with air filtersCapper Heads: 12 headsCap Distribution System: Pick & Place SupportedCaps: Plastic pre-threaded caps (GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g - drawing available)Machine Condition: Fully overhauled at the end of 2024Advanced Automation & Control SystemsThis rotary platform supports steady, continuous motion for stable heating, blowing, and filling cycles. The isobaric gravity filling system utilizes 63 mechanical valves to ensure low-turbulence filling, while the integrated pressurized cabin with air filters guarantees a clean environment for sensitive beverage production. Integrated machine controls streamline changeovers and monitoring, while the air recovery system enhances sustainability and lowers compressed air consumption. Quick adjustments for the Alaska neck finish and the specialized Arol pick-and-place cap distribution system reduce downtime across multi-format industrial packaging operations.Production Line Integration CapabilitiesThe Combi system is designed for seamless integration into a complete beverage production line. By combining the Sidel SBO 16 blower, the ALSIM 63-valve gravity filler, and the Arol 12-head capper into a single monoblock, it eliminates intermediate air conveyors, reducing footprint and container scuffing. It pairs effectively with downstream packaging machinery and can operate inline with main conveyors, inspection systems, and labeling equipment. The machine is well suited for PET bottle handling and can be configured for a range of bottle sizes depending on installed molds and process parameters.Machine Condition & Maintenance HistoryThe complete Combi configuration was fully overhauled and refurbished at the end of 2024, supporting reliable, ready-for-operation performance for used bottling line projects. As a second h... Bjdpfx Abszccgdjtell

Year of construction: 2026, condition: new, functionality: fully functional, The combination of FTJ-1175 jaw track crusher and FTB-1550 scalper screen are stone crushing and screening systems, which are often used in quarries, mines and construction sites. This type of equipment is designed for crushing and screening of hard rocks. Here are the general features of these two FABO equipments combined and serve as a single line FTJ-1175 Tracked Jaw Crusher: - Capacity: Ideal for crushing hard rocks and stones with high capacity. - Mobility: Thanks to its crawler structure, it moves easily in difficult terrains. - Jaw Opening: Thanks to its wide jaw opening, it easily crushes large-sized materials. - Efficiency: It offers long-lasting use with its energy-saving engine and durable construction materials. FTB-1550 Tracked Scalper Screen - Screening Capacity: Suitable for pre-screening of large volume and coarse materials. - Dimensions: Features a 1550 mm wide screen system, allowing for larger material capacity. - Durability: With its wear-resistant construction, it can be used in heavy-duty operations. - VariousScreening Options: Different sizes of screens allow separation of various material sizes. Advantages of the Combination: 1. High Performance: Crushing and screening of the material is done quickly in the same system. 2. Mobility: The crawler structure provides portability and offers the possibility of use at different sites 3. Operational Ease: Integrated operation on a single line saves labour and time. 4. Various Applications: Suitable for quarries, recycling plants and large-scale construction projects. With impressive crushing capacity, reduced operating costs, and simple maintenance, this combination is a reliable, high-performing solution for any project Blsdpfx Abezx U Rlstsl FABO’s innovative technology guarantees exceptional efficiency and performance, giving your projects a strong competitive edge.

Condition: excellent (used), WOLFKING TSM 400 + DANFOTECH ID.NO. 2842 Wolfking TSM 400 liter paddle mixer with cooling Co2 with associated Danfotech CH 300 meatbin lift. Bljdpfx Asu Ivwtobtjl Dimensions 200 x 165 cm Height 270 cm. Height to edge 150 cm.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Bsdovvi Rfjpfx Abtoll

Year of construction: 2019, condition: used, General Information The MobyLift is a practical tool for ergonomically lifting, transporting, and positioning products such as doors, table tops, and other panels. From an operational perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, and prevents back problems, thereby reducing work-related absences. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our expertise to create a practical tool. The MobyLift MC-120-H consists of the following modules: Blsdpsv Dauwjfx Abtjl - Mobile base frame - Electric lifting and tilting system - Automatically operating vacuum unit - Wireless electric control The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into several portable modules after it is switched off. This makes it very convenient to load and unload the MobyLift or move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator, which allows the battery status to be continuously monitored. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilting angle, front to back: 37°, electrically operated - Swivel angle - head joint on both sides: 90° - Rotation angle - head joint: 360° continuous - Lateral displacement: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim