Used Cts Cw-40/16 for sale (33,816)

Condition: ready for operation (used), Year of construction: 2014, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATS 585 Kedpfsy Nd Tyex Af Hedt total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - ?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control "ATS 585" * Rear stop positioning (X-axis) * Depth adjustment positioning (Y1, Y2 axes) * Ability to program various programs * Swiveling control panel, front left * Tool and program library - NC electric-motor-driven material/backgauge (X-axis) * With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER "RX" safety device - front - 2x side, swiveling safety doors - 1x freely movable double foot control - Operating instructions Also included in the scope of delivery (pre-installed): - 1x brand-new / split set of upper tools * UKB 11,200 mm - 2x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand-new / split set of lower tooling * UKB 21.207 - 2x 835 mm * V-openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Kdodpfx Afszg Ty Ue Hst Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2018, operating hours: 2,000 h, DKP400v1(2018) + KR16(2008) + KRC2(2008) Kdjdpfx Asrn S S Rjf Hst

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. Ksdpeulpmzsfx Af Hedt This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: excellent (used), Machine package 30 pcs 110V + A voltage converter (110V to 230V), a robust extension cable, and a 4-way socket distributor are included in the price. 1.Hilti TE35 2. Hilti TE 40 AVR 3.Hilti DEG 4. Hilti WSR 1400-PE 5. Hilti DC 230 Kdedjvzcrmopfx Af Het 6. Hilti SD 2500 7. Hilti ST 1800 8. Hilti SD 2500 9. Hilti SD 2500 10 Hilti SI 100 11.Kress HMX 24 600W 12.Kress HMX 24 600W 13.Kress HMX 24 600W 14. Hilti TE 6S 15. Hilti DEG 16. Hilti TE2 17. Hilti WSJ 850-ET 18. Hilti WSJ 850-ET 19. Hilti SR 16 20. Hilti SR 16 21.Hilti SR 16 22.Hilti SR 16 23.Hilti SR 16 24. Hilti UD 30 650W 25. Hilti UD 30 650W 26. Hilti UD 30 650W 27. Hilti TE2 650W 28. Hilti TE2 600W 29. Hilti DEG 30. Hilti ST 1800 600W

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C Ksdpfx Afezg Ty Io Hodt The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Kdodpfx Aswbt Uqef Hjt Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: used, CTS Type: TS-70/600-13 Water-cooled temperature test chamber Type series: TS-70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from 120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Kodpfozg Tzfox Af Hsdt Electrical connection: 400/3P/N/PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Kjdpfolpadyex Af Hedt Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Kdedpsw Rqwtofx Af Hot

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, total height: 2,100 mm, total width: 2,000 mm, total length: 2,620 mm, temperature: 160 °C, control cabinet length: 2,620 mm, control cabinet height: 2,100 mm, control cabinet width: 2,000 mm, power: 40 kW (54.38 HP), type of input current: three-phase, operating temperature: 160 °C, input voltage: 400 V, input frequency: 50 Hz, Drying oven Width: 2000 mm, Depth: 2620 mm, Height: 2100 mm Electrically heated, 380V, 40 kW, up to 160 degrees Celsius. The drying oven is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. Kdodpfx Aszvcgcef Hot Location: Neusäß near Augsburg.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Kdsdpfxszu T Sms Af Het Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: refurbished (used), HEINEMANN DN 400 TV 16 CNC LATHE DISTANCE BETWEEN CENTERS: 4500 MM MAX. SWING OVER BED: 870 MM MAX. SWING OVER CROSS SLIDE: 610 MM SPINDLE SPEED: 1400 RPM SPINDLE BORE: 130 MM AUTOMATIC TURRET: 12 STATIONS Kedpfx Afozzdvpj Hodt SPINDLE MOTOR POWER: 85 KW MACHINE COMPLETELY OVERHAULED AND RETROFITTED CNC CONTROL: SIEMENS EQUIPPED WITH AUTOMATIC STEADY REST IN CYCLE

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Kodpfx Aezh D E Rjf Hjdt Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 1979, Packing aid for folder-gluer machines Japack 40-1 Box length: 80-535 mm Box width: 50-400 mm Kedpfx Afjw H N U Ro Hsdt Standard, motorized curve on the right / back-up conveyor with vibrator, contactless proximity switches, laser counter, motorized height adjustment, packing pattern: 1-4 rows/layers, resulting in 16 possibilities. Overhaul 2025: cleaned, inspected, painted, new belts.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Kedpfx Afozt Iace Hsdt Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate Ksdpfeziizyex Af Hjdt 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 Kdjdezvrf Ijpfx Af Hst CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of construction: 2002, Heckert CWK 400 D, year 2002, Siemens 840 D control, X/Y/Z travel 650/650/650 mm, 240-position tool changer, HSK 63 spindle taper, spindle speed up to 10,000 rpm, internal coolant supply 30 - 50 bar, NC rotary table Ø 460 mm, six-pallet changer 500 x 400 mm, chip conveyor, new spare spindle, 25 HSK holders. Ksdpfx Afsw Uf Hkj Hedt

Condition: like new (used), Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake Manufacturer: Bystronic Model: XACT Smart 160/3100 Serial number: XACT 22040SE Year of manufacture: 02/2022 Kdjdpoy U I Tbefx Af Het Technical specifications: Maximum pressing force: 1600 kN Maximum working length: 3100 mm Maximum stroke: 200 mm Rapid traverse speed: 140 mm/s Working speed: 1–10 mm/s Return speed: 115 mm/s Machine weight: 10,500 kg

Condition: used, mileage: 4,87,792 km, power: 120 kW (163.15 HP), first registration: 11/2012, fuel type: diesel, number of seats: 17, gearing type: automatic, next inspection (TÜV): 12/2025, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle today, subject to final sale, errors, typos, and prior sale: Mercedes Benz Transfer 45 Bus Sprinter 516 CDI (Vehicle No. 451) First registration: November 20, 2012 487,792 km Engine: 2,143 cc Kodoz A I R Rspfx Af Hjdt 120 kW / 163 hp Euro 5 EEV Permissible total weight: 5,000 kg Unladen weight: 3,045 kg Payload: 1,955 kg TÜV (technical inspection): 12/2025, emissions test: 03/2025 Sprinter 516 CDI 16+1 seats Automatic sliding door on the passenger side with extending step Double-leaf doors at the rear Central locking with remote control Fully automatic transmission 2 x electric windows, mirrors, heated mirrors Microwave Auxiliary heater 2nd fan Front armrests Heated driver's seat Radio/CD Emergency exit, among others, through a roof window Tachograph Tires: 195/75R16, approx. 40% tread Price: €10,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Kdodpswfg Ewjfx Af Het

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 11,558 h, load capacity: 1,600 kg, lifting height: 3,960 mm, free lift: 1,820 mm, fuel type: electric, mast type: duplex, construction height: 2,460 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,200 kg, total height: 2,460 mm, total length: 2,100 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.960 mm Closed height: 2.460 mm Free lift: 1.820 mm Mast: Duplex (2F396) Fork length: 1.200 mm Fork carriage: FEM 2B Drive: Elektro Battery: 48 V/625 Ah (2016) Charger: ohne/without Kedpfx Afez Apqns Hodt Tyres: Superelastik 18x7-8 (40 %) / 16x6-8 (50 %) Service weight: 3.200 kg Length: 2.100 mm Width: 1.100 mm Year of manufacture: 2006 Operating hours: 11.558 h Condition: ready to drive EQUIPMENT 3rd valve, Front work lights, Half cabin ATTACHMENTS Sideshift Internal no.: 1308826 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Kedpfxevt Tn Aj Af Hjdt Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: L3B031, IMA MISTRAL Y 16 Bottle/Can Air Rinsing Machine – Used, Immediately Available Machine Data: Model: IMA MISTRAL Y 16 Type: Automatic Bottle/Can Air Rinsing and Extraction Machine Serial No.: L3B031 Year of Manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Electrical Specifications: 220/380 V, 3 phases, 50 Hz Space Requirements: approx. 400 × 140 × 220 cm Description & Features: This rotary air rinsing machine is designed for pharmaceutical and medical applications, suitable for GMP-compliant internal cleaning of stable, round glass or plastic bottles using sterile compressed air. • Fully automatic bottle cleaning and extraction • Processes up to 200 containers per minute • Includes format parts for plastic bottles Ø 44 mm × height 95 mm • Additional formats included: Ø 40 × 55 mm, Ø 60 × 130 mm • Operation: Bottles are single-lane fed via conveyor and screw separator, transferred into a carousel, gripped by tongs, rotated 180°, and cleaned with nozzles (blowing) and extraction heads (suction). Bottles are then transferred to the conveyor for downstream processing. • Suitable for bottles and cans made of plastic and glass • High level of automation, GMP-compliant design Documentation & Manuals: • Operating manuals (German, English, Italian) • Electrical circuit diagrams • Layout drawings / guards layout • Spare parts catalog • Blowing diagram / electrical diagram Kjdpfx Asw Sfa Eof Hodt • FAT and SAT documentation • Machine and operator manual in German Scope of Supply: • Complete machine • Spare parts as per catalog • All original documentation (PDFs and printed documents) • Size parts for various bottle sizes Condition: • Used, from pharmaceutical production • Immediately ready for operation after installation • Available immediately Location: Çorlu, Turkey Price: On request