Used Elumatec Sbz 130/01 for sale (13,370)

Condition: ready for operation (used), Abel EM-025Z0110-SG electromagnetic diaphragm pump SN:3001302-01 + Lenze GST06-2M VAL 090CM4 spur gear + M55AP090M045E00CT three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Rjdpfji D Eykox Akwou

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components Rodpoy Hkd Hefx Akwsu 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2008, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: ABB, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 130 kg Arm Reach: 3200 mm Model Type: IRB6640 Controller: IRC5 Model Year: 2008 Rodpfx Asw Nalkokwsu Condition: Used Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teachpendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: excellent (used), Year of construction: 2015, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: ABB, controller model: IRC5 M2004, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Rodew Nakyopfx Akwju Specifications Payload: 130 kg Arm Reach: 3200 mm Model Type: IRB6640 Controller: IRC5 Model Year: 2015 Condition: Used Included: Manipulator + IRC5 Control Cabin + All Wire Sets We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: IRB6640-130/3.2 IRC5, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully functional: including robot arm, controller, all cabling, and teach pendant. Comes with our warranty and a comprehensive 77-Point Protocol inspection performed by our in-house robotics engineers. Brand: ABB Model: IRB6640-130/3.2 Controller: IRC5 Payload: 130 kg Rodpfx Akoy Edrujwju Reach: 3.2 m General use: Heavy-duty, floor-mounted Applications: Material handling, machine tending, spot welding, among others. Optional: We can supply the robot with the ABB IRBT6004 linear track (up to 32 meters if required). Supplied complete including 7th axis drive unit in the robot controller, motor, cable chain, grease pump—fully functional and ready to operate. IRS Robotics® Refurbishment: - 77-Point Protocol – fully tested and inspected on our test benches - New oil/grease, new batteries - Fully cleaned and repainted in your desired RAL color - Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About us: We are your reliable partner for refurbished A-brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. Worldwide shipping available.

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: Redpfx Asyf Uy Uskwsu From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: used, mileage: 1,59,324 km, power: 96 kW (130.52 HP), first registration: 09/2022, fuel type: diesel, empty load weight: 2,173 kg, maximum load weight: 1,327 kg, overall weight: 3,500 kg, tire size: 235/65 R16C 115R, next inspection (TÜV): 09/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 20,590 mm, total width: 25,470 mm, total height: 59,810 mm, Year of construction: 2022, front tire size: 235/65 R16C 115R, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, ABS, driver's airbag, number of seats: 3, ASR, car phone with hands-free kit for mobile, onboard computer, tinted windows, front and rear parking sensors, electric windows left and right, 6-speed manual gearbox, high roof, air conditioning, engine Euro 6, multifunction steering wheel, entertainment: radio, cruise control, central locking, heated windscreen, leather steering wheel, Airline rails, wooden floor, interior trim, wide rear step, 270-degree rear wing doors, lashing eyes, timing belt replaced at 155,000 km Redpfx Akjy N Ef Dsweu

Condition: used, Year of construction: 2014, functionality: unexamined, controller model: IRC5, Mechanical arm IRB6640-130/3.2 Year of manufacture: 2014 For further information, please do not hesitate to contact us. Redpey D Uuwsfx Akwju

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00587, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 6640-130/3.2 manufactured in 2012.11. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-130/3.2 Model Number: IRB-6640 Year of Manufacture Robot: 2012.11 Warranty term (months): 12   Payload (kg): 130 Reach (mm): 3200 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1340   Controller: IRC5 Year of Manufacture Cabinet: 2012.11 RCC Length (m): 14   Teach Pendant: DSQC679 Rsdpfxoyzklaj Akweu Teach Pendant Cable Length (m): 15

Condition: ready for operation (used), Year of construction: 2010, overall weight: 1,340 kg, load capacity: 130 kg, arm reach: 3,200 mm, number of axes: 6, This 6-axis ABB IRB 6600-130/3.2 was manufactured in 2010. It features a maximum payload of 130 kg and an impressive reach of approximately 3200 mm. Designed for various applications such as material handling and welding, this robot arm offers versatility and efficiency. If you are looking to get high-quality automation capabilities, consider the ABB IRB 6600-130/3.2 robot arm we have for sale. Contact us for further details. • Voltage: 3 × 400 V • Frequency: 50–60 Hz Redpfx Akeyxm Tbswju • Rated current: 20 A • Short circuit current: 6.5 kA @ 400 V • Controller weight: 150 kg • Payload: max. 130 kg • Repeatability: ±0.05 mm • Mounting: floor-standing • Typical applications: material handling, palletizing, machine tending, welding, assembly

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00586, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 6640-130/3.2 manufactured in 2012.11. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-130/3.2 Model Number: IRB-6640 Year of Manufacture Robot: 2012.11 Warranty term (months): 12   Payload (kg): 130 Reach (mm): 3200 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1340   Controller: IRC5 Rsdjyx Hmzopfx Akwou Year of Manufacture Cabinet: 2012.11 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00579, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 6640-130/3.2 manufactured in 2011.04. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-130/3.2 Model Number: IRB-6640 Year of Manufacture Robot: 2011.04 Warranty term (months): 12   Payload (kg): 130 Reach (mm): 3200 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1340   Controller: IRC5 Rodpoywrirefx Akwsu Year of Manufacture Cabinet: 2011.04 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130 t Year of manufacture: 2008 Shot weight: 475.9 g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Shot weight: 475.9 g Clamping force: 130 t Mould platen dimensions: 745 x 745 mm Tie bar spacing: 470 x 470 mm Ejector force: 22.6 kN Rsdpfx Akoynzrpswju Mould height: 300 mm Opening stroke: 600 mm Max. platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control: MC5 Equipment: - accumulator - euromap 67 interface - 2 x pneumatic valve - hydraulic core on moving platen

Condition: excellent (used), Year of construction: 2009, load capacity: 130 kg, arm reach: 3,200 mm, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 130 kg Arm Reach: 3200 mm Rodswran Eepfx Akweu Model Type: IRB6640 Controller: IRC5 Model Year: 2009 Working hours: 35.180 Condition: TESTED & PAINTED & BATTERY CHANGED Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: excellent (used), 130mm meat grinder in excellent condition. Redpfx Asyw A Hujkwou

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Rjdpfx Aeu Hxm Uskwsu Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, color: yellow, Year of construction: 2018, operating hours: 757 h, 757 operating hours – Wacker Neuson EZ17 mini excavator – Total weight 1,800 kg – Engine 13.8 kW – includes 3 buckets – 2 additional hydraulic functions = Additional information = Rodoyxwxnopfx Akwsu Year of manufacture: 2018 Drive: Tracks Contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Redpoxd Tv Dofx Akwju Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: new, bending length: 1550sheet thickness: 4.5upper roll diameter: 130 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.117,-- - Special voltage EURO 480,-- - Material feeding table Rsdpfx Aed Ab Nxjkwou - Lower roll is powered by electric motor We have many references!

Condition: new, bending length: 1050sheet thickness: 5.5upper roll diameter: 130 Technical specifications: Rjdpfx Ajd Ab Nyokwou - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 799,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 130/50-10 -Number: 4 pieces available Rsdegqg H Uspfx Akwou -Price: per piece -Dimensions: 110/105/H145 mm -Weight: 6,0 kg

Condition: used, Screw clamps, pipe clamps, pipe fastening, Hose clamps Rodpfx Akoipwctswsu -Manufacturer: Stedo 7 Norma, hose clamps 25 pieces/ box -Clamping diameter: 110 to 130 mm -Band width: 12mm -Material: steel, galvanized -Number: 4 boxes available -Price: per box -Dimensions cardboard: 325/275/H100 mm -Weight: 1.7 kg/box.

Condition: good (used), hydraulic motor, oil motor, hydraulic pump -Manufacturer: GSL (German Standard Lift), Hydraulic pump for driving work platforms -Type: 730-0080-130-002 -Drive shaft: Ø 25 x 40 mm -universally applicable -Number: 1x engine available -Price: per piece Rodslntpiopfx Akwsu -Dimensions: 240/135/H130 mm -Weight: 13.2 kg/piece

Condition: new, Rollmak 3-rolls round bending machine ST3 130-15/6 Special equipment included in the price hardened rolls motorized rear roll adjustment digital display sheet width 1550 mm sheet thickness 6,0 mm max. sheet thickness 5,0 mm bending roll length 1550 mm roll diameter 130 mm smallest bending diameter 195 mm weight 1650 kg dimension L-W-H 3250 x 850 x 1300 mm Motor:3,0 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor Rsdpolu Evnefx Akwju sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Rollmak 3-roll round bending machine SME 130-15/4,5 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 1550 mm sheet thickness 4,5 mm max. Rodpfx Aolu Ernekwsu sheet thickness 4,0 mm bending roll length 1550 mm roll diameter 130 mm smallest bending diameter 195 mm weight 1210 kg dimension L-W-H 2650 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark