Used Embatherm Dte 180 for sale (6,471)

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. Lhedjy Nic Hspfx Abyeh We will be happy to answer any further questions by telephone.

Condition: excellent (used), RS-Simulators Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KSS 600/75-10K Design: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulators. Suitable for temperature tests, climate tests, material and aging tests. Application in industrial testing and measurement. Technical Data Temperature range: -75 °C to +180 °C Temperature change: Heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerant: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1400 kg Equipment RS-Simulators control panel / operating panel Program operation Observation window Temperature monitoring in the test chamber Operating hour counter Side feed-through Robust industrial design Scope of delivery RS-Simulators climate chamber KSS 600/75-10K Scope of delivery as shown in the pictures Functional test Ledpsy H Ib Ajfx Abyohh Refrigerant service Leak test Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Direct from catering butchers which closed recently. Commercial model with extended hopper and extended outfeed conveyor. Complete with paper interleaver and auto wipe function (needs compressed air for this function). Lhjdjt I E T Ajpfx Abyoh

Condition: used, Year: N/A Condition: good Technical specifications: - Number of drilling heads: 1 - Maximum drilling thickness: 60 mm - Maximum paper width: 480 mm - Throat depth: 102 mm - Drill bit diameter: 2–20 mm - Motor power: 0.5 kW - Dimensions (H × W × D): 650 × 850 × 540 mm - Weight: approx. 50 kg - Precise drilling of holes in paper blocks - Adjustable drilling position - Replaceable drilling tools Description: Electric paper drilling machine NAGEL CITOBORMA 180 from the German manufacturer Ernst Nagel. The machine is designed for printing companies, copy centers, bookbinding workshops, and finishing departments. Thanks to the precise guidance of the drilling unit, it enables fast and clean drilling of holes in paper, catalogues, blocks, and other printed materials. Lsdpfxozgc Ino Abyehh

Condition: used, Harmonic Drive planetary gearbox HPS-180-5-Di- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine Lhedpjyxg S Refx Abyeh - fully functionalmanufacturer: Harmonic Drive type: HPS-180-5-Di spare part no.: 12171266

Year of construction: 2014, condition: not inspected (used), Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Lhedpfxjx Dng Do Abysh Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Condition: ready for operation (used), functionality: fully functional, Maximum saw blade diameter: 550 mm Motor power: 5.5 kW Maximum cutting length: 5 m Discharge table with four ejectors Lhedpfx Abszdx S Dsyoh Control via touchscreen panel with inPush software Loading table with chains Length: 7800 mm Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 CE marking

Condition: used, Year of construction: 2022, power: 15.8 kW (21.48 HP), total length: 1,760 mm, total width: 1,040 mm, total height: 2,555 mm, overall weight: 3,000 kg, No. 3279 Servo press / servo eccentric press Huras NKV 180-650 Used, year of construction 2022 Servo press for automation tasks and punching processes Fields of application: try-out and pre-series production / production of punched parts / punched strip overmoulding / packaging / assembly Freely programmable speed profiles and motion sequences from 1 - 150 strokes/min Setup in inching mode with full press force Nominal press force 180 kN Stroke height 5 - 50 mm (freely programmable) Stroke frequency / number of strokes 1 - 150 strokes/min Ram adjustment +/- 1 mm BDC dimension / installation space at BDC 274 mm Passage left / right 210 mm Tool installation space / press table/ram surface 650 x 450 mm LW Table opening 490 x 140 mm LW Punching direction from left to right Drive technology dynamic servo direct drive Lenze Drive power 15.8 kW Operating pressure 5 bar Control Siemens S7-1500 Swivelling touchscreen panel Siemens Simatic HMI TPI1200 12” Dynamic servo feed unit VS-125 Transport dimensions approx. 1760 x 1040 x 2555 mm LWH Weight approx. 3000 kg Sale on behalf of customer, ex location near 35392 Gießen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Lhodpfezc Ix Sox Abysh To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: repair required (used), functionality: not functional, REMA DMJA-180 Double-Spindle Multi-Blade Saw Cutting height up to 180 mm Cutting width 300 mm Number of cutting spindles: 2 Spindle diameter: 60 mm Sleeve diameter: 70 mm Maximum saw blade size: 350 mm Ledpow Ngiijfx Abyjhh Motor power: 2 x 30 kW Feed speed adjustable up to 50 m/min The machine requires overhaul

Condition: like new (used), number 4 Stück weight 3,8 kg range L-W-H 180 x 70 x 180 mm Mounting block B50 - (Item No. Holding force 50 kN) This mounting block, made from high-strength aluminium, is an ideal complement to clamping elements in the MQ series and, to a limited extent, the S series, where clamping heights vary. Lhodpfxozc Rrue Abyjh Applications include forming technology and machining technology --> Height = 180 mm --> Length = 180 mm Price per unit, discount available for bulk purchases

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper Lhedpezar Daofx Abyjh • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2015, (1) Injection molding machine, Handling: Wittmann | W833-0747 | 2014 Temperature control: HB Therm | Dryer: Somos | RDX27 | 2015 Miscellaneous: 1x Protective Enclosure 1x Auxiliary Unit, by Ferromatik Milacron 1x Automation, by Wittmann + Conveyor Belts, by Frasch Technical Details: Power supply voltage (V): 400 Frequency (Hz): 50 Approx. weight (t): 10.1 + 0.6 Lhjdpfx Aboy N R Tmoyoh

Condition: good (used), Upper support Sled width 145 mm Height 72 mm Bolt circle 180 mm Lhsdpfxedq Nvie Abyeh Centering pin diameter 70 mm Contact surface 240 x 220 mm Weight 23 kg Shipping dimensions: L 490 mm W 220 mm H 270 mm

Condition: used, functionality: fully functional, mileage: 2,20,000 km, first registration: 06/2003, fuel type: diesel, tire condition: 90 %, fuel: diesel, color: white, number of gears: 6, number of seats: 3, total height: 3,800 mm, Year of construction: 2003, This aerial platform mounted on a truck has a working height of 26 meters and a lateral reach of 15 meters. The platform is a BIZZOCCHI TK 260, and the truck is a DAF LF 45.180. It is in very good condition and has recently had its chassis repainted. The platform has not been used frequently as there has been no need for it within our company. Lodpjzdga Rjfx Abyohh

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speed 5,000 min-1 Lsdszb R Iajpfx Abyohh 8-position turret Minimum quantity lubrication

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, loading space length: 7,800 mm, loading space width: 2,530 mm, total length: 9,500 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 385 / 55 r 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Turntable semi-trailer for waste disposal Fine-grained steel welded construction Sled: Container is placed on the sled from the rear and pushed forward, container stop at the front adjustable for 6.0 / 6.5 and 7.0 m skip loaders with external rollers Container locking: - 2 pairs of locking hooks recessed in the floor - pneumatic operation. The container locking system is a 2-point system that operates from the inside, and locking of skip loaders with an internal frame is not possible. Turntable with robust ball bearing race Chocks with holder Lsdpfxji Ri Nqe Abyohh Aluminum side impact protection Steel underrun protection Half-shell fenders Rear impact protection, vertical, left and right, with delta-shaped rubber on the underrun protection holder Coupling device, turntable semi-trailer Tow hitch with tested 40 mm tow eye Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension with lift and lower valve Wheels and tires 385 / 55 R 22.5 According to the manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Anti-theft device: The spring-loaded parking brake is activated when the container locking system is open. Vehicle - driving stability system 2 non-interchangeable coupling heads at the front, with connection lines to the tractor unit EBS, electronic braking system with EBS connector at the front, with connection cable Note: The semi-trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 additional LED work light at the rear, switched via reversing light 2 x 7-pole non-interchangeable connectors at the front, with connection cable Approval / Signage Country of approval: Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau (anthracite gray) Tow hitch, KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,800 mm, loading space width: 2,530 mm, total length: 9,500 mm, total width: 2,550 mm, suspension: air, tire size: 385 / 55 r 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet customer needs. Further information Turntable semi-trailer for waste disposal Fine-grained steel welded construction 2 longitudinal beams with cross members, the top of the longitudinal beams designed as a container roller track in a wear-resistant design, can be loaded from the rear, with an inclining ramp. For roll-off containers with 6.5/7.0 m. Container locking: - 2 pairs of locking hooks recessed in the floor - pneumatic operation. The container locking is a 2-point system that operates from the inside, and locking roll-off containers with an internal stiffener is not possible (for transporting roll-off containers with a subframe according to DIN 30722) Turntable with robust ball bearing race Chocks with holder Aluminum side guard Steel underrun protection Semi-elliptical fenders Coupling device for semi-trailer, turntable Tow hitch with tested 40 mm tow eye Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reducing tire wear and fuel consumption Air suspension Wheels and tires 385 / 55 R 22.5 according to manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Anti-theft device: the spring-loaded parking brake is activated when the container locking is open Vehicle - driving stability system 2 tamper-proof coupling heads at the front, with connecting lines to the tractor unit, EBS, electronic braking system with EBS plug at the front, with connecting cable Note: The semi-trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lifting and lowering valve Electrical system Ljdpfx Aoi Ri Nmebyehh 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole tamper-proof plugs at the front, with connecting cable Registration country/plates Registration country: Germany with DEKRA approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 Novagrau, 10-year warranty against rust Tow hitch, KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED Ljdpfsndwdhox Abyehh

Condition: excellent (used), Vötsch VC³ 4018 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine Type: Climate Test Chamber / Temperature Test Chamber Design: Air-cooled Test Chamber Volume: approx. 190 liters For sale is a used climate test chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate tests, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical Data: Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4 K/min Temperature Change Rate (Cooling): approx. 4 K/min Max. Heat Compensation in Temperature Operation: approx. 2300 W Temperature Deviation (Time): ± 0.1 to ± 0.5 K Temperature Homogeneity (Spatial): ± 0.5 to ± 1.5 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Temperature Deviation (Time) in Climate Operation: ± 0.1 to ± 0.3 K Temperature Homogeneity (Spatial) in Climate Operation: ± 0.5 to ± 1 K Humidity Deviation (Time): ± 1 to ± 3 % RH Heat Compensation in Climate Operation: approx. 400 W Test Chamber Dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Housing Dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant Quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 4.1 kW Rated Current: 14 A Test Chamber Lighting: Halogen, 2 x 24 V / 50 W Equipment Touch Panel Operation Viewing Window in the Door Stainless Steel Test Chamber Test Chamber Lighting Side Pass-Throughs Shelves / Interior Fittings as Shown in Pictures Documentation / Operating Manual Further Accessories as Shown in Pictures Condition Used Optical Condition as Shown in Pictures Scope of Delivery as Shown Inspection Possible by Appointment Safety Note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown. Lhjdpfxszc Ht Is Abyeh Subject to change and errors in the technical data, as well as prior sale.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012090, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: silver, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish Lhjdpfxszggicj Abyjh ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, Manufacturer: INA Schaeffler Condition: New, packaging only opened for the purpose of taking photos Type: Energy guidance system / cable carrier Model: Mekokab 150/180/325-WH-AL-B Product series: Mekokab Design: Energy chain or cable guidance system Material: Aluminum version Application area: Machine tools, automation systems, handling technology and industrial motion axes Use: Guiding and protecting power, control and data cables in moving applications Manufacturer group: Schaeffler Industrial Automation Quantity available: 2 pieces Lsdpfxszcw I No Abyehh

Condition: used, functionality: fully functional, mileage: 42,800 km, first registration: 12/2024, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, energy efficiency: E, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6e, suspension: steel, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,130 mm, loading space height: 2,520 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, lane keeping assist, onboard computer, power assisted steering, power mirror, soot filter, spoiler, start-stop system, tail-lift, trailer coupling, truck registration, FIAT DUCATO MAXI 180 MTJ Year 12/2024, approximately 42,800 km EURO 6E, 2.0 engine, 180 hp, 6-speed manual transmission, air conditioning, cruise control, driver's seat with armrest, DAB Bluetooth radio, electric mirrors, electric windows, central locking, airbags, Start&Stop system, and other standard features. Equipped with a van body with internal dimensions of 4.30 x 2.12 x 2.52 meters, complete with one side door, an 800 kg hydraulic tail lift, and a tow hitch. Lodpfx Aszf Nz Eobyjhh MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso)

Condition: excellent (used), BINDER MK 53 E2 Cold-Hot Test Chamber / Temperature Test Cabinet Manufacturer: BINDER Type: MK 53 E2 Temperature range: -40 °C to +180 °C Test chamber volume: 53 liters Lhodpfxszcxwls Abyoh Internal dimensions (W x H x D): 402 x 402 x 330 mm External dimensions (W x H x D): 740 x 1222 x 740 mm Heating rate: approx. 5.2 K/min Cooling rate: approx. 5.0 K/min Electrical connection: 230 V / 50 Hz Rated power: 2.60 kW Rated current: 11.3 A Protection class: IP20 Refrigerant: R404A Refrigerant charge: 0.60 kg Weight: approx. 159 kg Equipment: MB1 screen-based program controller RS422 interface Viewing window with internal lighting 2 stainless steel inserts Temperature limiter, class 2 Cable entry Ø 80 mm Programmable dew protection Condition: used Scope of delivery: see images (Subject to changes and errors in the technical data)

Condition: excellent (used), CTS Temperature Test Chamber T-40/25 Lhjdpfx Aezcxmtobyjh Technical Data Manufacturer: CTS Clima Temperatur Systeme Type: T-40/25 Temperature Range: -40 °C to +180 °C Test Chamber Volume: 25 liters Temperature Change Rate: Heating: 8.0 K/min Cooling: 6.5 K/min Temperature Deviation over Time: ±0.5 to ±1 K Test Chamber Dimensions (W x D x H): 350 x 240 x 300 mm External Dimensions (W x D x H): 595 x 580 x 860 mm Electrical Data: Rated Voltage: 230 V 1/N 50 Hz Rated Power: 1.86 kW Rated Current: 8.53 A Protection Class: IP20 Refrigerant: R404A Filling Quantity: 0.8 kg Operating Pressure: 25 bar Test Pressure: 20 bar Features: LCD control panel Digital setpoint/actual value display RS232 interface Stainless steel test chamber material 1.4301 Window 200 x 200 mm Lockable door Air-cooled refrigeration unit EASYLog data logger 3 stainless steel shelves Weight: approx. 90 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (See picture) Inspection possible by appointment. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, operation weight: 147 kg, Hand-operated agitator cooker: + Green + Type HR 180i Lhjdpfx Abszgbknjyjh + Burner output: 50 kW + 152 cm x 115 cm x 135 cm (l x w x h) + Weight: 147 kg Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!