Sanding machine

STAEHLE-HESS Gloria/Saturn E 180 RF

Condition: excellent (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high Djdpfxjvu Hgbo Anqoci continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Hole 50mm. Dsdpfxsg Tumys Anqjci All complete. Very good condition. Available as a set. Possible to buy also separately.

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Dcedpfjpqxnxox Anqoi

Condition: good (used), Year of construction: 2011, Load moving system CBM 240 / ST 120 Dedowvhrtspfx Anqsci MACH-ID 923 Type: CBM 240 / ST 120 Year: 2011

Condition: not inspected (used), Number of sanding units 4 St Dcjdst Tqy Espfx Anqoi sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: ready for operation (used), working length 3600 mm Working width 1500 mm Working height ca. 900 mm WEINIG Return Conveyor System RF15 ----- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Technical Description: Dsdpfjxpn Tnex Anqjci Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood Dcsdpfxeixxwme Anqsi second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Dsdpfxsvnv Uhj Anqoci Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, Dcjdjv D Rg Dopfx Anqei sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: used, machine/vehicle number: 008595, X axis working area: 4687 mm Y axis working area: 260 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 4 axes Total number of tool changer positions: 44 Dcodpfx Anjy Stvveqoi