Used Engel 4550 / 320 Macpet for sale (4,677)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Gsdpfx Asx Up Utsl Asud Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ Gedpfxex Up Rno Al Ajud L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550 Gjdpofnqapofx Al Aoud

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Screw diameter: 55 mm / 35 mm Gjdpfx Ajy Ufd Rel Aeud Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Shot volume: 295 cm3 Type: Multicomponent Drive: Hydraulic \+ robot Wittmann \+ rotary table

Condition: new, Engel D 2965.1/2-G27-B5.15 engine, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Guodpfx Aloi D Hu Tj Asd

Condition: excellent (used), For sale: Professional industrial welding machine KEMPPI Kempomat 320 – a robust and reliable unit for MIG/MAG welding. Equipment from renowned Finnish manufacturer KEMPPI, known for its high quality and durability. 📋 Technical specifications: Model: KEMPOMAT 320 Welding current: up to 320 A Power supply: 3-phase (380V) Voltage range: approx. 15.5V – 30V Duty cycle: 320 A – 40% 265 A – 60% 205 A – 100% Protection class: IP23 Insulation class: H Cooling: Fan 📦 Included in the set: Kemppi Kempomat 320 welder Built-in wire feeder MIG/MAG welding torch Ground cable Gas cylinder with regulator Hose + wiring Transport trolley 🛠 Technical condition: Used equipment Shows normal signs of use (scuffs, scratches) Cosmetic condition as visible in the photos Complete wire feeder (visible inside) Sold as shown in the photos ✅ Advantages: Very durable construction (industrial gear) Easy operation and parameter adjustment Powerful – suitable for heavy-duty workshop tasks Mobile thanks to the transport trolley Guedjyzt Rljpfx Al Ajd ⚠️ Additional information: Ideal for workshops, production plants, steel structure fabrication Possibility of pallet shipping Personal pickup or shipping possible

Condition: good (used), Year of construction: 1999, screw diameter: 30 mm, Engel injection molding cylinder Nozzle diameter 30mm Aggregate 200 Year of manufacture 1999 Guedpjzfq Iaofx Al Aod

Condition: good (used), Year of construction: 2001, screw diameter: 35 mm, Engel injection molding cylinder Screw diameter 35 Unit 330 Year of manufacture 2021 Gusdezfq H Aspfx Al Aed

Condition: good (used), Year of construction: 2000, screw diameter: 45 mm, Engel injection molding cylinder Unit 500 Screw diameter 45 mm Quantity: 2 pieces Guedozfq Hiopfx Al Asd

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Gsdoy Au I Ujpfx Al Aeud Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Gjdpfx Alsxzq Skj Ajud Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology Guodpewm Iz Nofx Al Ajd The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Guodpfx Aowm Iy Eel Aed Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: excellent (used), Year of construction: 2012, clamping force: 160 kN, ENGEL VC 1050/160 Tech – Clamping unit Clamping force: 1600 kN Opening stroke: 608 mm Ejector stroke: 150 mm Ejector force: 61 kN Screw diameter: 45 mm Max. swept volume: 342 cm³ Screw speed max: 290 r/min Screw speed max (current): 290 r/min Injection rate: 170 cm³/s Injection rate (increased): 134 cm³/s Specific injection pressure: 2403 bar Specific injection pressure (increased): 2404 bar Nozzle stroke: 350 mm Nozzle contact force: 67.2 kN Gedpfx Asx Up T Nsl Ajud Type: Horizontal Drive: Hydraulic hours: 53.000h

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Gedpfoy Rn E Aox Al Aoud Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Gedozb Ivhspfx Al Asud Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo Gujdezcaxdopfx Al Ajd C – pneumatic

Condition: used, Year of construction: 2006, operating hours: 4,500 h, VICTORY 200/80 Power SN: 50294 Year: 2006 Closing force (kN): 800 S10 screw, diameter 30mm Operating hours: ONLY 4,500 Mounting plates enlarged vertically Mould heater with 12 control loops HV 2 version with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Ethernet interface for use with EMS 8x digital output, 8x digital input Interface for ejector protection Interface for temperature control units, Data protocol: Engel, physical type: 20MA-CL Microflow MINI-CAM: Process parameter adjustment support based on an expert system 2-pole service socket, 230V 6x 3-phase socket, 10A / 16A Guodpfxezcanre Al Aod 2x 3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 4 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable. Tubing for flow controller, 4 temperature control circuits

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. Gjdpfx Alswb Dl Ts Ajud • The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000. The selling price is €78,500 including crane. I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Gusdpey R Eq Asfx Al Aod delivery time: on request terms of payment: 100% prior to delivery

Condition: new, New 35 mm cylinder – fully assembled and ready for immediate use! Unpack – install – drive off! ✅ brand new ✅ fully pre-assembled ✅ immediately operational I purchase all machines and peripheral devices directly from the customer at a fair price. The resale price is calculated fairly so that all three parties – seller, buyer, and myself as broker – benefit from a small, fair deal. Untrustworthy purchase offers from various used machinery dealers are therefore not welcome. Gjdpfx Alew Ha Nlo Asud

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 2,30,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system Gedpfx Aljy Tuhio Asud - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: excellent (used), Year of construction: 2010, Clamping force: 260 t Screw diameter: 50 mm Screw dia 2 : 35mm Type: Horizontal Drive: Hydraulic Robot Engel Gujdpfxey Eytzo Al Aed Conveyor cage

Condition: used, Year of construction: 2002, operating hours: 49,100 h, functionality: fully functional, clamping force: 450 kN, overall weight: 3,300 kg, First owner Guodpfx Alezal The Aod

Condition: used, Year of construction: 2018, Serial No. 221921, Control unit by Engel, Type CC300, Clamping force 1,700 t, 2 injection units, rotary table, minimum/maximum mold height 800 - 1,600 mm, platen distance 3,350 mm, clear horizontal/vertical opening 1,850 / 1,415 mm, 16 cascade controllers, 64 hot runner zones, core pulls hydraulic 4 (moving side) / 4 (fixed side), screw diameter 105 / 50 mm, injection weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control by Oni, Type Rhytemper FlexControl 32, 4x 8-circuit block modules 125 °C, 6-circuit block module 125 °C, visualization unit, extraction handling by Engel, Type Viper 60, 5 axes (X,Y,Z,C,B-Axis), nozzle spacing 300 mm, year of manufacture 2018, Serial No. 221938, part enclosure, outfeed conveyor, mobile conveyor by Engel, Type BGR FB100 KMAT, year of manufacture 2018, Serial No. 2144098, L approx. 4,200 mm, W 1,000 mm, external temperature control unit and material dosing not included in this offer. Damage: Hydraulic hoses leaking. Gedpfxoy I R Tqe Al Aeud