x-travel 2000 mm
y-travel 4000 mm
z-travel 150 mm
Control Siemens Sinumerik 840D
table-size 3000 x 4000 mm
swivelling +/- 57 Grad
traversing speed
x-axis 20000 mm/min
y-axis 20000 mm/min
z-axis 12000 mm/min
positioning accuracy +/-0,1 mm/m
repeating accuracy +/-0,025 mm
total power requirement 15 kW
weight of the machine ca. 11 t
equipped with:
- CNC Siemens control Sinumerik 840D,Handwheel and Siemens SIMATIC
S7-300 and SIMODRIVE 611, 1GB HHD Drive
- Machine works with 2D cutting head
- H...
x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37
H3z9y2p9q
Electronics for TRUMPF TRUMATIC WS 2500 waterjet machine, complete control cabinet, a monitor unit, servo motors, on the images attached.
Cwr92gk8
x-travel 6000 mm
y-travel 3000 mm
z-travel 230 mm
Capacity 3600 bar
workpiece width - max. 200 mm
table load 28 t
feed 84 m/min
Coz9u7wym
Table 6000x300 mm
control By Vision
total power requirement kW
weight of the machine ca. 16,7 t
dimensions of the machine ca. m
2 heads
NO: 359 W
treatment plant
Linbear straightness accuracy around 0.381 mm per 1m
Cut speed 7.6 M/min
Traverse speed 12.7 M/min
Repeatability 0.50 mm
Working area X Axis:3.000mm
Working area Y Axis:2.000mm
Working area Z axis:178mm
Power resonator: 4000 bar kW / Amp
Bswjv8favn
Feed rate X-Axis: 12.700mm
Feed rate Y-Axis: 12.700mm
Feed rate Z-Axis: 12.700mm
Control: FLOWCUT
Cutting hours: 3000H
Length: 5.000 mm
Width: 3.000 mm
Height: 2.500 mm
Please Note: The information on this page has been ...
MJT -W5-45D -3020 WATERJET CUTTING MACHINE
HIGH-PRESSURE WATER CUTTING SYSTEM
DELIVERY FROM THE MANUFACTURER IN A SHORT TIME
Cutting size (mm.) CNC - 5 axis bridge 45D Type 3000x2000x250
CNC control unit ESA control unit
Ethernet and network interfaces, USB port
Additional handwheel (X, Y, Z)
Helical gear system Hardened gears and pinions
Linear bearings Linear guides and rails
Step accuracy 0.01 mm
Fast rotation speed 30.000 mm / min
Lubrication Automatic centralized lubrication system
HIG...
Producer : Bystronic
Type : 3002 no: 4378 Year : 1989-1991
Class : Byjet
Intensifier : IMA Streamline Ingersoll-Rand
Type : external booster - Intensifier 50 HP
no: 1271-1091-177
Table range : X 3500 x Y 1950 ( Z 115 mm)
Weight : 5400 kg - 4 units
Price : 24.100 EUR ( 21.800 EUR with no Slurry extractor )
External Booster : repaired Status : good [ deliver 6.8 bar ]
Intensifier : HP check valves -replaced , Sapphire nozzle r...
The MBM-ASAS-ME is the abrasive
sludge extraction and settling
system from Metallbau Müller
GmbH for small cutting plants with
a consumption of abrasive up to
500 g/min. It is easy to integrate
into existing systems and removes
the abrasive sludge reliably whilst
the cutting system is operating.
Pvgnoi
The supplied special pipework
system is installed in the cutting
tank. During the cutting operation
a Siemens controller checks the
extraction process. The abrasive
sludge is pumped straight into...
1. High pressure pump 50,KMT Classic,3800 bar,3,8 lit/min, 7000 working hours; good condition, service made on hydraulic-intensifire by WJS, year: 2011 -Price : €12 000 ; V.A.T. not included
Delivery place: Ex.Work Sarajevo,Bosnia and Hercegovina
2. High pressure pump 50, BHDT Hytron 40.37, 3.8lit / min, 9000 working hours, still in production, good condition- price €12 000; V.A.T. not included
Delivery place: Ex.Work Ronneby, Sweden
3.Control unit NUM 1020 complete dismantled with wj machine-...
Waterjet cutting systems
Cutting range 2D 3.000x1.500 mm
Cutting area 5-axis 2.550x1.050 mm
double-sided driven highly rigid machine bridge
stable frame construction (side parts designed as stress-relieved annealed and milled monoblocs, mounted pinned for machine installation)
High-quality linear guides on all axes
ground and hardened helical toothed racks in the Y- and X-axis, high quality ball screw in the Z-axis
servo motors and precision gears ensure excellent positioning and repeat accuracy...
Waterjet cutting machine, double head,
By8iyzls
Working table: 3.000x3.600x200mm. Numerical control: Siemens
Ingersoll-Rand pressure pump
Cutting options with or without abrasive
Possibility of manual inclined cutting
Total exterior dimensions approx. 9.,600 x 7.500mm
Bridge Type 6 axis CNC machine
Dlcdybqse
PIPE and PROFILE can be cut in higher precision compared to laser technology.
With Stainless Steel Divisor, designed by our engineers and integrated into system,brings optimum cutting solutions for profiles and pipes. 7 each servomotors working simultaneously realize smooth and rapid axial movements. Post Processes and all the software are written by Mavijet.
X Axis Motor 1 Pc. 3.2 NM servo motor set.
Y Axis Motor 2 Pcs 3.2 NM servo motor set.
Z Ax...
Slurry processing units
a. Still water tank with top/bottom level sensor
Double valve cleaning pipe.
2" input pipe for slurry -Zn Coated
2" Output pipe with 2.2 kW slurry pump ( sealing required on pump body)
Bmakzgtxhb
Double side chain with rubber blade scrapers[ consisting of metal body and rubber blade ] - 650 mm wide.
Double geared 0.75 kW motor outside the shell
Stainless steel slurry spreader with 5 exit.
Central control cabinet with 24V control volta...
Hezinger WaterLine HWOP cutting system
Workspace 4000 x 2000 mm
High pressure pump Manikandann.m 40.37 37.0 kW
Collision protection ALFFI heights Abt page
ECK872 4-axis CNC control system
Software IGEMS 2D nest level 1
Machine type Hezinger-WaterJet HWOP
Double-sided drive
Cutting width 4,000 mm
Basic working length 2000 mm
Cutting speed 50 - 10,000 mm / min
With the water jet Max cutting thickness 0.5 200 mm, stroke 250 mm
Speed up to 25 m / min
Cutting pool 4000 x 2000 mm
• made of galv...
Manufacturer: Expert Systemtechnik GmbH
Make: cutEXPERT
Type: Variojet
Year of manufacture: 2009
Features: single table with the dimensions: length = 6500mm; Width = 3300 mm; Height = 1850mmGewicht: 1500kg
Power consumption: 7,0 kW
Cutting head number 2 manufacturer: AllfiType: V high SpeedHochdruckpumpe
: Manufacturer: UhdeTyp: HP19/37-SBaujahr: 2009
Capacity 3, 8 l / min
Design pressure: 4000 bar
Motor power: 37kW
Weight: 1450kg
Single table, work room (cutting edge) dimensions: Length = 2200...
Water jet cutting systems
Cutting area 2.050x1.050 mm
highly rigid machine bridge driven on both sides
stable frame construction (side parts designed as stress-relieved annealed and milled monoblocs, mounted pinned for machine installation)
High-quality linear guides on all axes
ground and hardened helical toothed racks in the Y- and X-axis, high-quality ball screw drive in the Z-axis
servo motor drive in X-, Y- and Z-axis
electronically monitored central lubrication
Separate cutting table with ...
High pressure pump BHDT HYTRON 40.37 in good condition, was used until recently. 19379 operating hours
Oqcjn
Water cutting machine. Work dimensions. 1.500x2.000mm, With pressure pump. “C.M.S Italy - Costruzioni Macchine Speciali - Tecnocut Technology”
Vtywpq
For sale is a control card of the company Bosch Rexroth.
The card was not installed and is therefore unused.
Iwf8spf
Costs for shipping outside Germany will be calculated individually and paid by the buyer
Universal Portal waterjet cutting system Hezinger WaterLine model HW 3020
Operating range X-axis 3,080 mm
Movement range Y-axis 2,080 mm
07ecf2tw0
Travers area Z axis 250 mm
Ray catch basin with supporting area approx. 3,200 x 2,200 mm
Load the pad up to 800 kg / m ²
Portal system with fully protected axle Guide
Leadership machine and framework of thermal and mechanical
separated from each other.
Cutting water basin for the destruction of the residual energy
included even bearing grid
1...
Abrasive water jet cutting system:
AMT WJ 5030
Built 2019
Working range x: 510mm
Working range y. 310mm
Table size: approx. 650mm x 400mm
Table load: max 50kg
Soil load approx. 450kg
Working range z : max : 100mm manually adjustable/ for abrasive cutting, the setting range in z: approx. 60mm
Positioning accuracy:/- 0.05
Repeatability: less than 0.04
Cutting accuracy at the top edge of the workpiece: +/- 0.1mm
Dwkkha
Installation dimensions machine with integrated high-pressure pump: approx. 100...
Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits.
Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations.
Main features
- Innovative, patented use of water jet and plasma t...
High pressure pump BHDT HYTRON 40.37 in good condition, was used until recently. 30269 operating hours
B8lnoybh
CE-certified water jet cutter flowJET-3015
Abrasive cutting unit with 30kW high pressure pump
with abrasive dosing and storage tank
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasi...
Water jet cutting machine Hezinger WaterLine model HW1006
1 54.200,00 54.200,00
Portal system for the Abrassiv water jet cutting with
integrated water collecting tray
2 axle system (X Y) and Z axle manuel adjustable (adjustment wheel)
Traverse paths x x Y 1000 x 600 mm
Machine accuracy 0.08 mm
3ghomq7mq
Dimensions L x W x H 2,150 x 1,800 x 1.915 mm
Machine weight approx. 1.500 kg
Basic machine for external and internal pump
Facilities in the price included:
-Base with housing (excess man large)
...
IFB (integrated flying bridge) work area: 1200 mm x 2000 mm (real 1210 x 1990 mm) table is 1400 mm x 2040 mm
Nagz7
Hours of operation: approximately 17, 000 h
Pump: Model: ESC Allan Lickiss, performance 4150 bar
The machine is cutting replaceable on Abrassiv
(other cutting head), all parts including sand tanks are almost
unused available.
The machine was used only for pure water cutting.
The Opal Waterjet cutting system is the answer to particularly high demands for precision without thermal influence on demanding contours.
Thanks to a wide range of equipment options and a powerful high-pressure pump, the cutting system is suitable for practically all available materials, such as steel, stone, wood, etc. up to a material thickness of 250 mm.
The optionally available ProX 3D cutting head provides additional possibilities in 3D processing. Furthermore, we offer extensive additiona...
High pressure pump BHDT HYTRON 40.37 in good condition, was used until recently. 21415 operating hours
Bpllcmwgjb
CE-certified water jet cutter flowJET-2015
Abrasive cutting unit with 30kW high-pressure pump
with abrasive dosing and storage tank
***Manufactured to customer order***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasiv...
CE-certified water jet cutter flowJET-2015
Abrasive cutting unit with 15kW high-pressure pump
with abrasive dosing and storage tank for 100kg abrasive
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cuttin...
CE-certified water jet cutter flowJET-2015
Pure water system with a 30kW high-pressure pump
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasive version is equipped with an abrasive ...
CE-certified water jet cutter flowJET-2015
Pure water system with a 15kW high-pressure pump
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasive version is equipped with an abrasive ...
CE-certified water jet cutting machine JET-2515
Pure water system with a 15kW high-pressure pump
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasive version is equipped with an abra...
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
