Used Eyan Chamfering for sale (366)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Kdjdpfxezrtn No Af Hst Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 Kdodpfxezuyp Es Af Het - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: ready for operation (used), Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Kodpfozy Sdxox Af Hsdt Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Kjdpfjzu A Rxjx Af Hodt Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control Kdsdpfx Afozvnk He Het 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Kdodozcpixjpfx Af Hst Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Year of construction: 2024, condition: new, functionality: fully functional, ø 110-450 mm, wall thickness max. 72 mm Kedpfxot A Ufde Af Hedt Servo steel infeed and synchronization. NEW, unused

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm Kdedpjzndq Hefx Af Hot working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler Kdedpfxoy Ehrfs Af Hjt table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: excellent (used), operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, table length: 3,656 mm, table width: 1,956 mm, High-Performance 5-Axis Waterjet Cutting Machine Well-maintained OMAX 60120 CNC Waterjet Cutting System equipped with a 30 kW (40 HP) EnduroMAX 4060 high-pressure pump. The pump has only 4,500 operating hours, making this machine an excellent choice for companies seeking a reliable and productive waterjet system with significant remaining service life. This machine is equipped with the OMAX A-JET 5-axis cutting head, enabling bevel cutting and complex 3D machining. The A-JET head offers a tilting angle from 0° to 59°, providing exceptional flexibility for chamfers, weld preparation, and advanced contour cutting. The machine features the integrated OMAX CAD/CAM control system, allowing direct import and processing of DXF files for fast and efficient production. Technical Specifications * X / Y / Z Travel: 3,000 × 1,500 × 200 mm * Working Area: 3,000 × 1,400 × 150 mm * Table Size: 3,656 × 1,956 mm * Maximum Workpiece Load: 2,000 kg/m² * Machine Dimensions: 5,715 × 2,794 mm * Machine Height: 2,921 mm * Machine Weight (table only): 2,818 kg * Operating Weight (including water): 10,545 kg * Water Tank Capacity: 7,727 liters Control System * Integrated OMAX CAD/CAM software, Intelli-MAX® Premium * Direct DXF file compatibility * Industrial PC controller Electrical Specifications * Power Supply: 400 VAC, 50 Hz, 3-phase * Fuse Protection: 80 A High-Pressure Pump * Model: EnduroMAX 4060 * Pump Power: 30 kW (40 HP) * Operating Hours: Only 4,500 hours * Maximum Pressure: 4,100 bar * Flow Rate: 1.5-3.6 l/min * Pump Dimensions: 915 × 1,676 × 978 mm * Pre-filter: 0.2 micron * Integrated Water Pre-Booster: 6.7 bar Included Equipment * OMAX A-JET 5-axis cutting head (0°-59° tilt) * Abrasive hopper / abrasive feed system * Water treatment system * Sludge removal system Highlights * Premium OMAX 5-axis CNC waterjet cutting system * A-JET bevel cutting head with 0°-59° tilt * EnduroMAX 4060 pump with only 4,500 operating hours * Abrasive feed system included * Water treatment system included * Sludge removal system included * Integrated CAD/CAM software with direct DXF import * Large cutting area suitable for a wide range of materials * Robust industrial construction * Ready for immediate operation This is a fully equipped, high-specification OMAX waterjet system offering precision, flexibility, and low operating hours. An excellent opportunity for manufacturers looking for a premium CNC waterjet solution that is ready to go straight into production. Kodpfozi Hhqox Af Hsdt

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg Kdodpfjzrui Iex Af Hot ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Ksdpfx Afozuyk No Hodt Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. Ksdpfezux R Isx Af Hedt for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: used, Holz Her Sprint 1327 / PPC 231 Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm) 15" touchscreen control Power-PC color display Motorized, position-controlled bridge height adjustment Infeed guide rail with extended roller conveyor for precise workpiece feeding Pre-milling unit for edge preparation before the gluing station Fully automatic edge magazine for roll and strip material – SYNCHRO Gluing unit GLU-JET cartridge granule + PU adhesive, thin-film technology High-gloss package Glue height adjustment / sensor nozzle Printing unit MOT Cutting unit for roll and strip material with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit - Multifunction, 4 NC servo axes for edge trimming, radius, and chamfer milling 0.4 - 8 mm (15 mm) Scraping unit for chamfers and radii MOT, 2 NC axes pneumatic infeed and outfeed Copy milling unit for rounding corners and long edges, also for postforming, working height 60 mm Surface scraping unit - finish, pneumatic Buffing unit for final polishing and edge polishing with 2 textile discs HIGH-END spraying equipment Infeed area, electrically controlled release agent spray device Printing unit, antistatic spray device Outfeed area, electrically controlled cleaning agent spray device Complete tool set From leasing return / year of manufacture 2015 Kedpfjz Az H Rox Af Hjdt Machine is WORKSHOP OVERHAULED and in TOP CONDITION Available from stock in Lieboch

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Kedpfx Afeyyb Icj Hedt Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Kodswazn Aopfx Af Hsdt Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm Kedpezuyplefx Af Hjdt - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, Technical details: pressure: 80 t chamfer lenght: 2500 mm distance between columns: 2125 mm max. ram stroke: 200 mm plate thickness: 6 mm total power requirement: 9 kW operating pressure: 275 bar throat: 420 mm ajustment speed: 100 mm/s working feed: 10 mm/s weight of the machine ca.: 5,8 t Kjdpfx Aozpaqfof Hjdt dimensions of the machine ca.: 3,8 x 2,4 x 2,95 m NC pressbrake, controlled axis: Y1, Y2, X1, R with toolcabinet incl. accessories, barely used! *

Condition: new, Semi-automatic chamfering machine Developed and manufactured in England - Automatic chuck with material sensor - Automatic spindle start when the cutting head moves Ksdpfegkah Tsx Af Hjdt - Bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Can be easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990,-

Condition: good (used), Brandt edge banding machine with AIRTEC + jointing unit Adhesive: EVA / PUR / Airtec Roll material: 0.4-3 mm edge thickness Strip material: 0.4-15 mm (12 mm) edge thickness Workpiece thickness: 8-60 mm Recently serviced! Jointing unit OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz GLUING UNIT A12 END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.35 kW PNEUMATIC ADJUSTMENT END TRIMMING CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING PRE-MILLING UNIT 2 x 0.55 kW 0 DEGREES PNEUMATIC 2-POINT ADJUSTMENT MULTIFUNCTION SHAPING MILLING UNIT 2 x 0.4 kW PROFILE SCRAPER WITH QUICK-CHANGE HEADS Kdjdpfx Aoyz Sxbef Hot PNEUMATIC SCRAPER ADJUSTMENT GLUE JOINT SCRAPER BUFFING UNIT Feed speed: 8-18 m/min, with contour milling cutter 14 m/min Total length: 5760 mm Roll material: 0.3-3 mm Strip material: 3-15 mm (With VKNR 4845 exchangeable milling units, max. edge thickness is 12 mm!) GLUING UNIT A12 WORKPIECE PRE-HEATING QUICKMELT APPLICATION UNIT ADHESIVE REACTIVATION Infrared Workpiece return system BOOMERRANG TFU 140/R 20 Year of manufacture: 2016 As shown in illustrations Available from November 2026 All data taken from the data sheet, therefore subject to change Technical specifications available on request

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 For pre-coated edge banding material Kedpfx Ajzk Ntlsf Hedt Edge banding up to 1.3 mm with roller trimming with flush trimming using a blade with flush milling/chamfer milling top/bottom with HF motors Location: Röllbach Availability: at short notice

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Ksdpfxezuyhno Af Hsdt Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, - Edge milling unit 2 x 2.2 kW - Combi-melt gluing unit - Automatic edge magazine - Trimming unit 2 x 0.8 kW - Flush trimming unit 2 x 0.7 kW - Fine milling unit 2 x 0.3 kW - 2 quick-change sets for fine milling - Automated copy milling unit 2 x 0.37 kW - 2 pull blades - 2 surface pull blades - 5-way spraying system - Fine buffing unit with cloth disc 2 x 0.2 kW Edge banding machine Manufacturer: OTT Type: Twister Technical data: Glue application: Hot-melt adhesive application roller with simultaneous and counter-rotating action Edge thickness: 0.3-10 mm Workpiece thickness: 8-60 mm Workpiece width: 70 mm - Minimum Workpiece length: 150 mm - Minimum Operating pressure: 6 bar Feed power: 3.0 kW Feed speed: 14-20 m/min. Kdedpfozuyifjx Af Het Electrical connection: 3 x 400 V, 50 Hz Extraction: at 20 m/s, 1 x 180 mm diameter = 35 m³/min. Air velocity: 20 m/s - Minimum Compressed air consumption: 300 liters/min. (approximate value) Equipment - Machining units: Joining: - 2 x 2.2 kW, n=14600, 250 Hz, two individually controlled spindles. Combi-melt gluing unit: - Top-mounted gluing unit with interchangeable hopper for processing EVA, PUR hot-melt adhesives, or standard cleaning granules, hopper volume 2.5 l Edge magazine: - Automatic edge magazine with optical monitoring for strip edges in fixed lengths Trimming: - 2 x 0.8 kW, n=12000, 200 Hz, automatic pivoting 0 / 5, 2 HM saw blades, 140 x 3.2 x 16 mm, z=34 Flush trimming: - 2 x 0.7 kW, n=12000, 200 Hz, single-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 Fine milling (chamfer 15 / 30 / 45): - 2 x 0.3 kW, n=12000, 200 Hz, double-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 AWSR (radius R2-R5): - 2 quick-change sets for fine milling, 2 x 0.3 kW, with 2 HM reversible blade cutter heads AR73 x 16 x 16 mm, z=3, R2-R5 Copy milling: - Automated copy milling with two separate spindles for machining end faces and longitudinal radii. Motor power: 2 x 0.37 kW, 12000 rpm, Tools: R1 - R3 Pull blade: - 2 HM pull bars, automatically adjustable Surface pull blade: - 2 HM pull bars with fine adjustment PU set: - 5-way spraying system, 2 x release agents, 1 x lubricant, 2 x cleaning agents, fine buffing unit with cloth disc Edge finishing: - 2 x 0.2 kW, n=2800, 50 Hz, oscillating brushes Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Kodpfx Afjwwtpyj Hedt

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Ksdpfx Afjx S Hmze Hedt Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev