Used Fuhrer Und Bachmann T for sale (73,726)

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 Brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder, ID No. 270 675 02, serial number as per photo, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 14 mm, used. Lajdpfxoi D Hdkj Afujc

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module Version: B SN:EA6319178, the item has been checked and tested! ,used, normal signs of use, 100% functional, scope of delivery as per photos Lajdpomq H S Esfx Afuoc

Condition: ready for operation (used), Siemens 1FT5064-0AF01-1 - Z permanent magnet motor SN BT928858822290 Z = brake (G45) and encoder system (G44), used, minor signs of wear, 100% functional, scope of delivery as per photos, Z see type plate Lasdpfx Aetw I Suofuoc

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lodpfjtvct Hsx Afueac

Condition: ready for operation (used), Siemens 1HU3058-0AF01 servomotor SN: E5K60666701003 without tacho and encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos. Lasdpfx Aox Dvglsfusc

Condition: ready for operation (used), Siemens SIMOTICS 3 1PH8137-1DD13-0CC1 compact asynchronous motor, serial no.: YFC635252403001, used, in good condition, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for costs of packing and shipping! Lasdpfxox Dv U Ne Afujc

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Lajdpox Etu Eofx Afuoc

Condition: ready for operation (used), Siemens 6FC5247-0AF08-4AA0 hard drive with mounting bracket and damper for PCU 50.3 6FC5210-0DF31-2AA0, 6FC5210-0DF33-2AA0, 6FC5220-0AA31-2AA0, 6FC5220-0AA33-2AA0. Used, in like-new condition, 100% fully functional. Scope of delivery as shown in the photos. Lsdpfxex Eurxs Afueac

Condition: ready for operation (used), Winter service attachment for Piaggio / Pfau: Lajdpfx Asuyhk Aofuoc - Pfau LBS 180 snow plow - Mounting bracket with electro-hydraulics and lifting cylinder - incl. lower link and swivel cylinder Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, mileage: 3,02,000 km, power: 110 kW (149.56 HP), first registration: 06/2020, fuel type: diesel, gearing type: automatic, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Viewing by appointment by telephone. Ljdpezdxmnsfx Afujac

Condition: used, mileage: 2,82,000 km, power: 110 kW (149.56 HP), first registration: 07/2021, fuel type: diesel, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Inspection of the temperature-controlled container (for blood transport) is possible by prior telephone appointment. Ledpfx Aezdxmujfusac

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Technical Data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Lsdpfx Aoxw S Ixjfusac Features & Equipment • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer.

Condition: used, mileage: 1,55,000 km, power: 265 kW (360.30 HP), first registration: 07/2004, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: red, gearing type: mechanical, Year of construction: 2004, Equipment: ABS, crane, Man TGA 26.360 / 6x4 Vacuum and rinsing trolleys / 4x2 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2004 ? MILAGE: 155 000 km Lajdpfxsxrx Axj Afusc EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? POWER STEERING ? Immobiliser ? TACHOGRAPH CAPACITY: 9 000 kg TOTAL WEIGHT: 26 000kg WHEELBASE: 420/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR POMPE: CAPPELLOTTO CAP COMBI 2600 FM + 2 x FUNK TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 53671

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute Lsdpfx Aezf E Hqefusac - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Lodpfx Aozf E Dvofusac Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Lajdji Ri Hrjpfx Afuoc Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: new, Wide-span shelving / basic shelving / 2550x2500x600 WxHxD Wide-span shelving, new Dimensions: W 2550 x H 2500 x D 600 mm Lajdpfx Ascfbzcofuoc including 4 shelf levels Shelf load: ~250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelving uprights, 600x2500mm unassembled, including cross and diagonal braces, plastic foot plates 8x crossbeams 2450mm, including locking pins 4x shelf inserts 2430x545mm, thickness: 22 mm

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Lasdpfx Afok H Ic Uouec Image: similar. Machine is still in original packaging.

Condition: used, functionality: fully functional, We are selling used equipment: 4x conveyor belts, 11m x 0.5m x 0.85m 1x Krups conveyor belt, 4m x 0.45m 1x Krups conveyor belt, 5m x 0.45m 1x Fröhlich conveyor belt, 4m x 0.5m 2x Wegener + Stapel roller conveyor, 4m x 0.45m 1x blue roller conveyor, 6m x 0.7m 1x accordion-style roller conveyor, 4m x 0.5m 1x Illig HSP35b heat sealing machine 1x Benison CH-100 tamper-evident device Lsdpfezfpzfex Afuoac 1x IT rack, 2.1m x 1m x 0.8m 2x Bito flow rack, 2.8m x 2.5m x 1.3m 1x Popp Maschinenbau post-press system and much more! If you are interested, please contact us to arrange a viewing appointment. Alternatively, feel free to submit an offer directly.

Condition: new, Wide-span shelving unit, new Dimensions: L 2550 x H 3000 x D 800 mm Includes 4 shelf boards Shelf load capacity: ~250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: 2x Shelf uprights, 800x3000mm Unassembled, including cross and diagonal braces, Laedpfocfbyzjx Afuec Plastic footplates 8x Cross members 2450mm, Including locking pins 4x Shelf boards 2430x745mm, Thickness: 22 mm

Condition: new, Wide-span shelving unit, new Dimensions: L 2050 x H 3000 x D 800 mm Includes 4 shelves Shelf load capacity: approx. 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: Laodpfxscfbyhj Afuoc 2x Shelf uprights, 800x3000mm Unassembled, includes cross and diagonal braces, Plastic foot plates 8x Crossbeams 1950 mm, Includes locking pins 4x Shelves approx. 1930x745mm, Thickness: 22 mm

Condition: new, shelf height: 2,500 mm, Wide-span shelving, new Dimensions: L 2550 x H 2500 x D 800 mm Includes 4 shelf boards Shelf load capacity: ~250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Base shelving consisting of: 2x Shelf uprights, 800x2500mm Lasdpfxjcfby Ts Afujc Unassembled, including cross and diagonal braces, Plastic foot plates 8x Crossbars 2450mm, Includes securing pins 4x Shelf boards 2430x745mm, Thickness: 22 mm

Condition: new, Wide-span shelving unit, new Dimensions: L 2550 x H 2000 x D 600 mm Includes 4 shelves Shelf load capacity: ~250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: 2x Shelf uprights, 600x2000mm Unassembled, includes cross and diagonal braces, Plastic footplates Ljdpfxecfb Alo Afujac 8x Crossbeams 2450mm, Includes locking pins 4x Shelves 2440x545mm, Thickness: 22 mm

Condition: new, Wide-span shelving unit, new Dimensions: L 2050 x H 3000 x D 600 mm Includes 4 shelf boards Shelf load capacity: ~300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: Lasdpfx Aecfbx Iofusc 2x Shelf uprights, 600x3000mm Unassembled, including cross and diagonal braces, Plastic foot plates 8x Crossbars 1950 mm, Including locking pins 4x Shelf boards approx. 1940x545mm, Thickness: 22 mm

Condition: new, Wide-span shelving unit, new Dimensions: L 2050 x H 2500 x D 800 mm Includes 4 shelf panels Lsdpecfby Rofx Afujac Shelf load capacity: approx. 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: 2x Shelf uprights, 800x2500mm Unassembled, includes horizontal and diagonal braces, Plastic foot plates 8x Crossbars 1950 mm, Includes locking pins 4x Shelf panels approx. 1940x745mm, Thickness: 22-25 mm