Used Haas Vf-8 for sale (36,346)

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tjdpfx Abszwxz Ejteb Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1062021, controller manufacturer: HAAS/FANUC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Tsdoxuidxopfx Abteb Spindle speed max.: 10,000 rpm MACHINE DETAILS Tool changer: 40-fold Tool holder: BT40 Control: HAAS/FANUC

Condition: refurbished (used), Year of construction: 2016, HANDTMANN VF-608 plus F,P.A. The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. Todpepy Edlsfx Abtsb The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: used, Year of construction: 2019, HANDTMANN VF608 PLUS filling machine for sale. Please let me know if you are interested. Tsdpfjznvhqsx Abtsb

Condition: used, TECHNICAL DETAILS - Number of axes : 3 Todpoyn R Igofx Abtob MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 8100 [rpm] - Gearbox - Speed ranges : 2 - Number of spindle hours : 4000 [h] LINEAR AXES - Travels on X/Y/Z axes : 1270/508/635 [mm] - Rapid traverses rates (X/Y/Z) : 35.6/35.6/35.6 [m/min] - Cutting feed rates (X/Y/Z) : 21 [m/min] - Distance table / spindle nose (min./max.) : 742 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1321/495 [mm] - Maximum weight upon table : 794 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870/2510 [mm] - Machine height : 2690 [mm] - Machine weight : 6260 [kg] MACHINE HOURS - Number of hours under power : 16247 [h] - Number of working hours : 6025 [h] EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Rigid tapping - Prepared for a 4th-5th axis divider - Coolant tank : 208 [l] - Chips conveyor - Tool probe - Electric transformer

Condition: excellent (used), Year of construction: 2007, Vacuum sausage filler, Handtmann VF 608. The filler is in very good condition. Includes 10 different filling tubes. Tjdpjyu Tzvsfx Abtob

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Handtmann VF 628 vacuum filler, PCK4 control system Serial number: 17439 Code: 13 Year of manufacture: 2003 Power supply: 420 V / 3 phases, 50 Hz Rated power: 13.5 kW Current consumption: 18.6 A The Handtmann VF 628 vacuum filler is a highly efficient machine designed for the industrial production of meat and food products. Thanks to the use of vacuum technology, it ensures: - accurate venting of the filling, - maintaining a uniform structure and consistency, - high quality and durability of the finished product. Todpfx Abexdtrleteb The machine features a robust stainless steel construction, intuitive operation, and the ability to operate in automated production lines.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). Todpjywgaxjfx Abteb The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Todpfx Ajyv H Hiobtjb

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Tjdpfxowrfams Abtjb

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) Tjdpfx Abozh Eh Tetjb • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,800 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details. • Table dimensions: 1372 x 610 mm • Rapid traverse speed: 18,000 mm/min • Spindle motor power: 30 hp • Tool magazine capacity: 20 positions • Tool change time: 4.2 sec • USB port • 3-color status light • Through-spindle coolant Additional equipment • Tool probe • Renishaw wireless workpiece probe • Chip conveyor • Set of tool holders • Documentation Technical Specification Taper Size BT 40 Tedpfezibu Sjx Abteb

Condition: ready for operation (used), Year of construction: 2013, operating hours: 989 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40 Tedpfx Abozcnzmstob

Condition: good (used), Year of construction: 2006, Description: Tsdpszlhvzefx Abtob The machine is in good technical condition, and can be tested upon prior arrangement. Control system: Haas CNC. Maximum turning diameter: 406 mm / 16". Maximum turning length: 1,219 mm / 48". Distance between centers: 1,219 mm / 48". Swing over carriage/cross slide: approx. 282 mm / 11.1". X-axis travel: 203 mm / 8". Z-axis travel: 1,219 mm / 48". Spindle: A2-6. Spindle bore: 76.2 mm / 3.00". Spindle speed: 0–2,000 rpm. Spindle power: 12 HP / approx. 8.9 kW. Torque: approx. 203 Nm at 150 rpm. Chuck: typically 10" / 254 mm. Tailstock: manual, depending on configuration. Weight: approx. 2,087 kg. Machine dimensions: approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection: 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A, depending on configuration.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg Tjdpfx Asypv T Rebtob

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm Tedeyanlaopfx Abteb - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: excellent (used), Year of construction: 2008, operating hours: 17,700 h, functionality: fully functional, machine/vehicle number: 1064626, spindle speed (max.): 10,000 rpm, input voltage: 220 V, type of input current: AC, Used HAAS Super Mini Mill CNC vertical machining center for sale, year 2008, in excellent condition. The machine is fully functional, well maintained and ready for immediate production. This compact and reliable CNC milling machine is ideal for precision machining, small parts production, and workshops looking for a high-quality HAAS solution. 🔧 Technical Specifications: Manufacturer: HAAS Model: Super Mini Mill Year: 2008 Spindle taper: BT40 / SK40 compatible Spindle speed: 10,000 rpm Control: HAAS CNC Control Automatic Tool Changer (ATC) ⚙️ Equipment & Features: HAAS 4th Axis (rotary table) + tailstock Coolant system Automatic Tool Changer (ATC) High-speed spindle Compact footprint ✅ Condition: Fully functional – no errors Machine in excellent condition Tedpfsyy H A Sox Abtob No backlash Clean and well maintained Can be tested under power

Condition: excellent (used), Year of construction: 2019, operating hours: 3,700 h, functionality: fully functional, HAAS DM-2 – CNC vertical machining center, year 2019, including a 5-axis unit We offer for sale a HAAS DM-2 CNC vertical machining center, manufactured in 2019. The machine is in working and good condition, it is connected and can be tested by prior arrangement. The offer also includes a 5-axis / tilting rotary table, as shown in the photos. Key technical specifications: Manufacturer: HAAS Type: DM-2 Year of manufacture: 2019 Travel in X / Y / Z: 711 / 406 / 394 mm Spindle taper: ISO 40 Maximum spindle speed: 15,000 rpm Rapid traverse: 61 m/min Automatic side tool changer SMTC: 18 + 1 positions Tool holder: CAT / BT 40 Machining time / cutting time according to the owner's information: approx. 3,700 hours Tsdpfezwgn Tjx Abtjb The 5-axis unit is included in the machine offer The machine is functional and can be tested.

Condition: excellent (used), functionality: fully functional, Handtmann VF 830, AL-System 228-01, 242-16 Vacuum Filler with AL Hanging and Linking System Vacuum filler VF 830 with AL-System 228-01 for linking/hanging as well as hanging unit 242-16. The set is designed for fully automated production of meat products, particularly sausages in natural, collagen, and artificial casings. These machines deliver high portioning accuracy, productivity, and reliability in continuous operation. 1. Handtmann VF 830 Vacuum Filler Manufacturer: Handtmann Model: VF 830 Tsdpfjxyrczsx Abtsb Serial number: 38725 Year of manufacture: 2016 Power: 6.0 kW Power supply: 200–260 V / 17.3 A 380–440 V / 9.1 A 480–575 V / 7.2 A Frequency: 50/60 Hz The VF 830 is a high-quality vacuum filler designed for the precise dosing of meat mixtures and other food masses. It ensures consistent portioning and a high degree of product repeatability. 2. AL-System – Handtmann AL-System 228-01 Manufacturer: Handtmann Model: 228-01 Code: 40287 Serial number: 16800980 Year of manufacture: 2017 Power: 5.5 kW Power supply: 400 V / 3~ Current: 8.3 A Frequency: 50 Hz Weight: 655 kg The AL (Automatic Line) system handles automatic twisting, separating, and portioning of sausages in a process integrated with the vacuum filler. It provides high performance and precision in linking, and supports operation with various casing types. 3. Hanging Unit – Aufhängeeinheit 242-16 Manufacturer: Handtmann Model: 242-16 Code: 38774 Serial number: 10903245 Year of manufacture: 2016 The 242-16 hanging unit enables automatic hanging of sausage loops onto rods in the production line. It ensures reliable, high-speed operation and full integration with the AL system.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We offer this overhauled HAAS TR210 rotary/tilting table, year of manufacture 2015. The TR210 is a two-axis rotary/tilting table with tailstock, providing maximum rigidity and precise performance for 3+2 and full 5-axis machining of small to medium-sized parts. Encoders on the A-axis (tilt axis) improve positioning and repeatability accuracy. The TR210 fits VF-3 and larger machines from the VF series (the extended Z-axis clearance option is highly recommended). Tedpoyxw Ayofx Abtsb The table has been overhauled and serviced. All worn spare parts, seals, and O-rings have been replaced. We can provide a video upon request showing flawless machining. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, HANDTMANN HVF 658 | High Vacuum Filler with Loading Hopper Manufacturer: Handtmann Model / Type: HVF 658 Serial number: 31921 Year of manufacture: 2012 Power supply: 400 V | 50 Hz | 3 phases Current: 26 A Power: 18 kW Dimensions: 1660 x 1600 x 2400 mm Tedpszgxhdjfx Abtsb Loading hopper dimensions: 1900 x 1550 x 2000 mm Vacuum pump: Brand: Busch Type: KB 0040 D IZO Serial number: CZM123380806 Vacuum pump capacity: 48 m³/h Filling pressure: up to 72 bar The Handtmann HVF 658 industrial high-vacuum filler is a top-class, specialized portioning and filling machine designed for continuous operation in large meat processing plants, slaughterhouses, and factories producing snack sausages, dry sausages, salami, and meat snacks. The unique high-vacuum technology eliminates almost 100% of micro-air bubbles and oxygen from the filling, which directly translates into a compact structure of the finished product, excellent consistency in weight, reduced maturation and drying time, and a significant extension of the product's shelf life. The heart of the machine is a precise paddle feeding mechanism correlated with a powerful suction system of a Busch vacuum pump with a capacity of 48 m³/h. Thanks to the filling pressure of up to 72 bar, the HVF 658 model perfectly handles very dense, hard, heavily frozen, and demanding fillings. The design with an external, automated loading hopper and level sensors ensures smooth, continuous operation without technological downtime for traditional chamber filling.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 Tedpfx Asyb S U Uobtjb with below options 12000 rpm spindle HSS Touch probe Tool setter Through spindle coolant chip auger

Condition: refurbished (used), HANDTMANN VF-830 F.P.A. PCM The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. Machine with clipper socket. Machine with loading. Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation. Delivery time: 2 weeks WITH: Tedpeyxntcjfx Abtjb Linking gearbox AG-410 Holding device HV-414

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del Tsdpfsxrf Stox Abtsb

Condition: excellent (used), Year of construction: 2016, operating hours: 581 h, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 356 mm, controller manufacturer: Haas, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, We are offering this excellent Haas Mini Mill 2 vertical machining center, manufactured in 2016. It was primarily used to process aluminum, with occasional work on other materials such as POM, MDF, and brass; steel was processed very rarely. Tjdpfx Ajzg E Hmjbtjb A large selection of tools (almost exclusively for non-ferrous metals) is available and will also be sold. We would be happy to offer it as a set. Total cycle time: 581 hours. The machine has been used infrequently and is therefore in very good condition. Includes a Renishaw measuring system. If you have any questions or require further information, please feel free to send us a message or call us.