Used Hobest Ewd for sale (105)

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gkjdpfehxvu Eox Akajb Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Gkjdpfx Asvtwzmekaob Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: used, mileage: 1,98,570 km, power: 290 kW (394.29 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 7,950 kg, maximum load weight: 7,050 kg, overall weight: 28,000 kg, tire size: 275/70 R22.5 , 11mm, axle configuration: 4x4, wheelbase: 3,700 mm, next inspection (TÜV): 07/2025, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 275/70 R22.5 , 11mm, operation weight: 15,000 kg, Equipment: air conditioning,

Condition: used, Connecting rod / bar frame strut / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD bar frame. Technical data: - Overall length: approx. 3,270 mm - D1: 190 mm - D2: 150 mm Gkodpfx Akozrx Etsasb - Material thickness: 50 mm - Centre-to-centre distance: approx. 3,020 mm

Condition: new, -􀂾automatic screw feed -􀂾automatic switchoff for hopper movement via trail regulation - automatic depth disconnection Gjdpey Aiaxofx Akajkb - pneumatic drive and control - pneumatic screw ejection and emergency stop - foot control - protection-frame (safety device)

Condition: used, Pneumatic screwdriver, DESOUTTER Pneumatic screwdriver, rod screwdriver for screwing technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure required: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for right and left rotation (rotary ring control) - Without screwdriver shut-off Gksdpfjfgrrhsx Akaeb - Pneumatic control line Ø 4 mm - Pneumatic connection for screwdriver function min. Ø 10 mm - Aluminum bracket for handling device - Screw feeder Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing applications Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm screw clamp - Movable in three axes (horizontal, vertical, rotational) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 balancer units for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - for virtually weightless suspension of small devices - Load capacity adjustable in stages Gsdpfxsfgpfmj Akaekb - Constant tensile force Space requirement L x W x H: 770 x 310 x 1200 mm Weight: 19 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing operations Type: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Load capacity: 10 to 14 kg Outreach: 250 to 550 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Movable in three axes (horizontal, vertical, rotational) - 1 unit balancer for vertical movement TECHNA, Type 9340, adjustment range 10 to 14 kg - Adjustable locking pawl for vertical movement, manual release via Bowden cable - For weightless suspension of small devices - Load capacity adjustable - Constant tensile force Gedofx Hxzepfx Akajkb Space requirement L x W x H: 880 x 500 x 1120 mm Weight: 23 kg Good condition

Condition: good (used), mileage: 1,70,489 km, power: 368 kW (500.34 HP), first registration: 10/2024, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2024, Equipment: AdBlue, Bluetooth, air conditioning, central locking, cruise control, fridge, parking heater, retarder, soot filter, = Additional options and equipment = - Front work lights - Heated mirrors - High beam - Enclosed cab - Cab - Leather interior - Leather upholstery - Alloy rims - Air suspension - Particulate filter - Sleeper cab - Sideskirts - Sun visor - Auxiliary heater = Notes = Scania 500S Highline 4x2 – New dashboard – Full spec – Retarder – Full air suspension – Leather Year of manufacture: Mileage: 170,489 km VIN: YS2S4X20005758548 New dashboard Navigation tarder Leather LED Full air suspension PTO prep = Further information = Technical information Number of cylinders: 6 Transmission Gearbox: Opti Cruise, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Alloy rims; Max. axle load: 7,500 kg; Steering; Tire tread left: 60%; Tire tread right: 60% Rear axle: Tire size: 315/70R22.5; Twin tires; Alloy rims; Max. axle load: 11,500 kg; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60% Weights Unladen weight: 8,413 kg Payload: 10,587 kg Gross vehicle weight: 19,000 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Gjdpfx Akjzy Ekxeaokb

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Gkjdpfxexf Up Ue Akasb Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 Gkjdsx R Em Djpfx Akaeb power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN Gkedpfjym Dz Rox Akaeb total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Year of construction: 2006, condition: used, functionality: fully functional, We present an Automatic drawer slide insertion line of 3 machines and robot (currently in production): BLA - B41, manufactured 2006/2007 (Sweden) BLA - B28, manufactured 2006 (Sweden) Screwdriver 3RL, manufactured 2018 (Lithuania) Robot TECHNICAL SPECIFICATIONS Inserting of Drawer Slides Fitting machine BLA-B41 – pos. 1 Fitting machine in pass-through outfit, equipped with positioning stop, designed for automatic screwing of drawer slides. The fitting machine is designed for following sizes of material: Deep: 300–600 mm, servocontrolled adjustment Height: 400–1500 mm, servocontrolled adjustment Thickness: 16 mm Dimensions Machine length: 4100 mm Pass-through height: 900 mm Screwdriver equipment Screwdriver beams, 2 units, each equipped with 2 screwdrivers and corresponding screw feeders for Ø6.3x13 screws. A suiting screw is the type 84 FSX Magazine units 2 magazine units designed for left drawer slide 2 magazine units designed for right drawer slide · Each magazine contains approximately 40 drawer slides. · The length of the slides are 450 mm and the width 21.5 mm. Buffer conveyor TPB – pos. 2 Driven roller conveyor Total length: 2150 mm Other specifications are the same as for pos. 3 above. Buffer conveyor TPB – pos. 3 Driven roller conveyor Total length: 2450 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.78 m/sec. at 50 Hz (frequency controlled) Height: 900 mm Returning Conveyor System TPT-US – pos. 4 Gkjdpfx Aey T Nfiskasb Sideway section with four belts Speed: 0.5 m/sec. at 50 Hz (frequency controlled) Driven roller conveyor Total length: 8900 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.50 m/sec. at 50 Hz Height: 900 mm Additional specifications Sound pressure level Lower than 70 dB(A) Connection facts electrical With reference to the electrical drawings Connection facts pneumatic 0.63 MPa (6.3 bar), ½”

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm Gkedpfx Aev Dxxnskasb control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: excellent (used), mileage: 52,500 km, power: 103 kW (140.04 HP), first registration: 07/2023, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2023, Number of doors: 5 Cab: single Gkjdpfexb Rx Rsx Akaob Number of cylinders: 4 Engine displacement: 2,200 cc Technical condition: very good Optical condition: very good Damages: none Warranty: none

Condition: excellent (used), Year of construction: 2015, Item: Galdi RG270UCS Gedpfx Akjiiyr Ijaekb Used Filling machine: Galdi RG270UCS, for the inline forming, filling and sealing of Gable Top cartons. Pure-Pak Classic with Crew Cup Production year 2015 Pure-Pak Classic Ultrasonic Screw Cap Applicator moved by servomotors, many spare parts incl. The machine has been in production to 2021 and was dismantled q2 2021. Carton size 70 x 95 mm, 1500ml Speed up to 7000 cartons per hours Filler Volumetric piston filler + Bottom up Lenght 7715 mm Width 1500 mm Height 3655 mm More technical details can be provided upon request. We offer two pieces identical machines.

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece Gkjdpfxsfc Hfvs Akajb -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Condition: good (used), Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm -Connection: 220 volts -Price: per piece -Number: 11 pieces Gkodpfefc Hfxjx Akasb -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Year of construction: 2020, condition: new, machine/vehicle number: GALEN-RSC 200, Empty weight: 2.300 kg Attachment suited for: Construction machines Gkodpfxsn Tm Ibs Akaob Cargo space capacity: 1.500 l Selling price: € 100, US$ 105,6 Much longer service life and higher capacity than the old design with the difference of GALEN

Condition: new, functionality: fully functional, power: 433.94 kW (589.99 HP), first registration: 09/2024, fuel type: diesel, tire size: 385/55R22.5+315/70R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, 🇬🇧 SCANIA 590 S Super Smart Dash FULL AIR SUSPENSION 4+2 ⭕️ BRAND NEW FROM THE FACTORY ⭕️ AVAILABLE FOR IMMEDIATE DELIVERY - Full pneumatic suspension - Retarder - Zero mileage - Stationary air conditioning - Navigation system - Digital dashboard - Leather interior - Rear-mounted batteries - Alloy wheels - Michelin tyres TAILORED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 TO UP TO 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: Gkedpfx Akouq R Tgjasb 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 LARGE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES AVAILABLE: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S - Semi-trailer - Refrigerated semi-trailer - Tank - Lamberet - Schmitz - Isuzu - Fixed flatbed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Trilateral - V8 - Scania - Frost Edition - Curtainsider - Box - Tail lift - Refrigerated box - Insulated with refrigeration - Van Domenico Truck srl disclaims all responsibility for any discrepancies regarding technical specifications, optional features, and characteristics which, in some cases, may differ from those specified in this description. We invite you to verify the features of the specific vehicle.

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Gkjdpfx Asp H Swdjkaob Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: used, pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces Gsdod Scptopfx Akaekb -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Condition: good (used), Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers -Magazine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece Gedpfeb A N Izjx Akaskb

Condition: good (used), Air ratchet wrench, impact wrench, air ratchet -Square: 10 mm Gjdjb A Sx Rspfx Akajkb -Length: 400 mm -Weight: 4 kg

Condition: good (used), Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers -Magazine screwdriver: for self-drilling screws, sheet metal screws Gjdpfx Aeb A N N Rokaskb -Suitcase -Total weight: 10 kg