Used Hsm Gmbh + Co. Kg Vk 8818 Fu for sale (1,00,289)

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended Njdpfxjx R Uzde Akfela

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Nledeyuyg Sepfx Akfoa Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Nlsdsw Uab Aspfx Akfsa Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Crawler Dumper 500S The professional lift dumper for maximum efficiency on the construction site The Crawler Dumper 500S delivers powerful material transport, precise dumping, and reliable technology. Its hydraulic lifting function up to 1,200 mm makes it the ideal solution for direct unloading into containers, trailers, or elevated loading areas—efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the Crawler Dumper 500S is perfect for confined construction sites, rough terrain, and demanding continuous use. Your Advantages: - Hydraulic lifting and tipping function (90°) for convenient unloading - Lifting height up to 1,200 mm—ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimum traction thanks to wide crawler undercarriage - Durable, low-maintenance design - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Net weight: 550 kg Payload: 500 kg Skip volume: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function: Max. lift height: up to 1,200 mm Tip height: 1,050 mm Tip reach: 220 mm Tip angle: 90° Operation: hydraulic Chassis: Chassis type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Nljdpfjyml D Hex Akfja Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Crawler Dumper 500S excels wherever reliability, maneuverability, and lifting capacity are required: - Civil engineering and construction - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now—better prices available! Take advantage of our attractive offers. Enquiries worth your while!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery Nsdpfx Aoyfucvokfsla - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 9332067, ROLLER CONVEYOR - CONSTRUCTION BLASTING SYSTEM MANUFACTURER: RUMP TYPE: 20-W 1500-4 Manufacturer: Rump Type: 20W-1500-4 Year of manufacture: 2012 Nledpfxjy Entis Akfea Please refer to the technical drawing for dimensions, as well as for the operating hours. Including filter unit, sound insulation, control cabinet, complete documentation, etc. TOP CONDITION This is a ready-to-use, pre-owned machine. Sale is made without warranty and without guarantee. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm Nlodpfx Aksyxgxwofja

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Nledpfx Ajwq I U Rokfea Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Nledpfx Aox Ehg Tskfoa

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Width: 2,3 m Njdpfx Akoxbqrqjfsla Height: 1,95 m Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Condition: used, Year of construction: 1985, Beer drive transport tank built into trolley, with CIP spray head and manhole. Includes measuring system (max. flow: 120 l/min). Additional title: horizontal tank in container Capacity: 7200 l Operating pressure: 2 bar Nlodpfx Aksxbqhxefoa Operating temperature: 20 °C Length: 7,25 m Width: 2,4 m Height: 2 m Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Nlodjtdgkxspfx Akfoa Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², tank capacity: 200 l, Equipment: lighting, We offer an absolute innovation! A high-quality high-cube container for both indoor and outdoor use. This container is made of durable Corten steel, ensuring a lifespan of at least 30 years. It is fully sealed, windproof, and waterproof. What’s included? ✔ Premium 200 pressure blasting unit with manual abrasive recycling, capable of processing and reusing all common reusable abrasives. ✔ Integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). ✔ Pre-installed electrical system and LED lighting for immediate use. Robust, safe, and ready for versatile applications! This unit is immediately operational and designed for various industrial uses. Transport Available Transport can be arranged upon request, with pricing based on daily rates. Nlodpfxouiwu Hj Akfsa If you are interested or have any questions, feel free to contact me! For detailed information or a quote, please do not hesitate to reach out to me directly. I am happy to assist you! We also offer rent-to-own and leasing options for this sandblasting container. For inquiries or a price quote, please contact Mr. Andreas Wallner at any time.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Nodpjw E H E Rjfx Akfjla Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment Nlsdpfx Akjxdm Awefoa - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Nedpfx Aswh Rp Eskfola Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver Njdpfsc Ipc Uex Akfela → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil Nljdpfopbbc Hox Akfja - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL Nlodpfx Aec Ipckjkfja → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) → PC system / monitor

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition, unused after overhaul. Serviced only by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600-1200mm. 15 kW motor. Year: 2007. Bale weight approx. 380 kg. Nlsdpox S Sbdefx Akfea

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressing force: 48 t, filling opening width: 1,100 mm, filling opening length: 7,500 mm, bale length: 120 mm, bale width: 750 mm, bale height: 1,100 mm, bale weight: 550 kg, overall weight: 9,000 kg, Equipment: documentation/manual, Automatic baler HSM VK 4812 The machine is maintained in perfect condition. The total operating hours are only 1950, and it has processed just 1314 bales of material. The machine was regularly serviced and has operated indoors in a warehouse since new. The baler has worked almost exclusively with non-abrasive material – textile offcuts. Key advantages of the unit: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle time → ideal for use with conveyor lines - Significantly superior to the 15–22 kW version when processing a high material stream Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressing force: 58.2 N/cm² Volumetric throughput: up to 332 m³/h Practical weight throughput: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical (maximum) throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Filling opening: approx. 1020 × 1250 mm We also have other balers in stock. Transport costs depend on weight, volume, and most importantly, distance. When making inquiries, please provide the following details: Delivery address (postal code and town/city name). For further details and transport options please contact us by phone, as additional arrangements require direct contact. Nedpfx Akoy Dpy Uofsla Our contact details are available in the seller's legal information. We sell and export worldwide; thanks to our extensive warehouse capacity, we can flexibly and quickly supply larger quantities as well. We issue intra-community invoices – VAT-free. Opening hours: Mon–Fri: 08:00–16:00 Sat: closed

Condition: used, HSM 4012 Automatic Baler Pressing force: 45 tons Motor power: 15 kW Power supply: 400 V / 50 Hz Bale dimensions: approx. 900 × 720 × 600–1200 mm Bale cross-section W x H: 900 x 720 mm Tank capacity: 300 l Njdev Ak Dgjpfx Akfjla Bale weight: up to 400 kg depending on material Tying: 3-fold automatic wire tying Loading opening: 820 × 1250 mm, suitable for continuous loading, e.g. by conveyor belt Machine dimensions and weight: approx. 6180 × 3190 × 2540 mm, weight: approx. 7–8 t Materials for baling: cardboard, paper, plastic films, light packaging waste The baler was serviced by HSM

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, year of last overhaul: 2026, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. Nljdpsyyi Svefx Akfoa We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Njdpfx Akoyz Sn Njfola

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Nledpfx Asra Nrxokfja Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically