Used Ima Ima Glue Tank for sale (17,816)

Condition: used, mileage: 3,57,900 km, power: 375 kW (509.86 HP), first registration: 05/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Serviced according to maintenance schedule ---- ----* 12-speed automatic transmission * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Secondary oil retarder * Wheelbase 3,700 mm * Driver's air-suspended seat, comfort * Comfort upper bunk, wide, adjustable * Comfort lower bunk * Lower bunk mattress, PremiumComfort * Shaving mirror * Electric sun visor, 1-piece * LED ambient lighting, driving and living area * Stationary air conditioning, electric * Automatic climate control * Waste heat recovery system * Auxiliary hot water heater, cab * Noise and heat insulation, cab * Electric sliding/tilting roof, glass version * Seat base, lowered by 40 mm * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Air deflector, lockable, with end flap * Exterior sun visor, transparent Njdpfxjz A Iuvj Ab Uodb * Air horn * MirrorCam * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Driver's seat heating * Tires 315/70 R 22.5 * Tires 315/70 R 22.5, rear axle * Air suspension, rear axle * Navigation system * Fuel tank 570 liters * AdBlue tank 60 liters * Fuel tank 430 liters * Automatic high beam/low beam and cornering lights * LED turn signals in light signature * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine version Euro 6, E * High Performance Engine Brake * Transmission oil cooler * Safety Pack * Climate Package with noise/heat insulation * Actros L * Chrome package, interior * Comfort Package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Airbag, driver * Cruise control * Actros model generation 5 * Refrigerator in drawer under bed * EBS * Without spare wheel ----For sale to commercial customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: used, Rotary table, welding rotator, IMA MA Retainer AK2, Used machine Manufacturer: IMA Automation GMBH Type: MA Retainer AK2 Overall dimensions: Width: 1480 mm Depth: 1480 mm Height: 1620 mm Electrical data: 400V; Ndedpjxupz Defx Ab Ujb Table diameter: 860 mm

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Empty weight: 3.750 kg Nodsucxu Ijpfx Ab Ujdb Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: used, mileage: 4,42,481 km, power: 355 kW (482.67 HP), first registration: 11/2020, fuel type: diesel, tire size: 385-55-22.5, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking air conditioner, parking heater, retarder, second fuel tank, = Additional options and accessories = - (Roof) spoiler - Aluminum fuel tank - Low noise Ndjdpfez Awbzox Ab Usb - Speed limiter - Bunk - Radio/CD player - Side mirrors with electric adjustment - Stability control - Digital speedometer = Additional information = Cab: standard Brakes: disc brakes Front axle: tire size: 385-55-22.5; suspension: leaf spring suspension Rear axle: tire size: 315-70-22.5; suspension: air suspension Unladen weight: 8,504 kg Damage: none License plate: 2JXT132

Condition: used, mileage: 9,16,047 km, power: 324 kW (440.52 HP), first registration: 03/2017, fuel type: diesel, tire size: 315/60R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,050 l, color: blue, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,100 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, General Information Cab: SSC Ndjdpfxoz Ad Uze Ab Ujb Technical Information Number of cylinders: 6 Axle Configuration Tire tread: 40% Suspension: Air suspension Front axle: Tire size: 315/60R22.5; Reduction: single reduction Rear axle: Tire size: 295/60R22.5; Reduction: single reduction Weights Unladen weight: 7,931 kg Payload: 11,069 kg GVW: 19,000 kg Layout Number of berths: 2 Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: used, mileage: 9,66,000 km, power: 331 kW (450.03 HP), first registration: 12/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Scania R 450 with Retarder, Stand-Alone Air Conditioning, 2 XL Tanks, Euro 6 For inquiries: 0926793 * Condition: Very good * Output: 331 kW / 450 hp * Displacement: 12,742 cc * EURO 6 * AdBlue * Retarder * ABS * EBS * Differential lock, rear axle * Exterior mirrors and wide-angle mirrors, electrically adjustable and heated * Storage compartment above driver / center / passenger * Stand-alone air conditioning system * 2 sleeping berths * Auxiliary heater * Automatic climate control * Pull-out refrigerator box under the berth * Air-sprung, comfortable driver's seat * CD radio / AUX / USB / Bluetooth * Multifunction steering wheel * Exterior sun visor, transparent * Fog lights * Electric windows * Sun visor, side window, driver's door * Additional headlights on the cab * XL tank, left side, 700 L / aluminum * 2nd additional tank, right side, 500 L / aluminum Tires: Front axle: 315 / 80 R22.5, 20% leaf-sprung Rear axle: 315 / 80 R22.5, 20% air-sprung ----Price: 19,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish and...? Nsdpfxezz Dtbs Ab Uedb Typographical errors, errors and prior sale excepted.

Condition: used, mileage: 7,05,000 km, power: 331 kW (450.03 HP), first registration: 12/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Scania R 450 Retarder, stationary air conditioning, 2 XL tanks, Euro 6 For inquiries: 0926780 * Condition: Very good * Power: 331 kW / 450 hp * Displacement: 12,742 cc * EURO 6 * AdBlue * Retarder * ABS * EBS * Differential lock, rear axle * Exterior mirrors and wide-angle mirrors, electrically adjustable and heated * Storage compartment above driver / center / passenger * Stationary air conditioning * 2x bunk beds * Stationary heater * Automatic climate control * Pull-out refrigerator under bunk * Air-suspended comfort seat, driver * CD radio / AUX / USB / Bluetooth * Multifunction steering wheel * Exterior sun visor, transparent * Fog lights * Electric windows * Sun protection roller, side window, driver's door * Auxiliary headlights on the cab * XL tank, left side, 700 L / aluminum * 2nd additional tank, right side, 500 L / aluminum Tires: Front axle: 315 / 80 R22.5, 20% leaf-sprung Rear axle: 315 / 80 R22.5, 20% air-sprung Nodpfxjzz Dr Ds Ab Uodb ----Price: 21,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and…? Typographical errors, errors, and prior sale are subject to change.

Condition: used, mileage: 2,85,300 km, power: 375 kW (509.86 HP), first registration: 05/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Full service history ---- ----* MAN EasyStart roll-away protection * Front axle air suspension * Rear axle air suspension * Anti-lock Braking System (ABS) * Emergency Brake Assist (EBA) Ndodpox A Nf Sefx Ab Ueb * Retarder * Electronic Stability Program (ESP) * Disc brakes * Full braking assistant * Driver attention warning system MAN AttentionGuard * Electric sliding/lifting roof, glass version * Standalone air conditioning, electric * Battery master switch * Lane Departure Warning (LDW) * External sun visor, transparent * Heated rear-view mirrors * Exterior mirrors electrically adjustable and heated * Air horns, cab roof mounted * Roof and side spoilers on cab * Electric windows for driver and passenger doors * GX cab – the maximum (wide, long, extra high) * Mirrors electrically adjustable, driver and passenger side * Central locking with remote control * Immobiliser (transponder) * Automatic transmission * MAN Idle Speed Driving transmission function * MAN TipMatic 14 27 DD transmission with retarder * Automatic climate control * Auxiliary hot-water heater * Heated driver's seat * 6-cylinder engine * Fuel tank 480 litres * AdBlue tank 80 litres * Fuel tank 480 litres * Fog lights * Headlamp cleaning system * Engine version Euro 6, E * Engine version with AdBlue * Air-suspended driver’s seat * Cornering light * High beam assistant * Lower bunk * Upper bunk * Adaptive cruise control (ACC) with stop-and-go function * Driver comfort package * Electric front windscreen roller blind * Refrigerator in drawer under bed * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will be pleased to provide you with a leasing or financing offer.

Condition: used, mileage: 3,79,500 km, power: 375 kW (509.86 HP), first registration: 07/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Serviced according to schedule ---- ----* Connectivity Board Module (Rio Box) * Additional cab insulation * 12-speed automatic transmission * MAN EasyStart (hill-hold control) * MAN EVBec (electronically controlled exhaust valve brake) * MAN Media System Professional Navigation, 12.3 inch * MAN Advanced Sound System with subwoofer * ECO mode basic setting for MAN EfficientCruise * Differential lock, rear axle * Traction control system (ASR) * Air-suspended rear axle * Anti-lock braking system (ABS) * Emergency braking assistant (EBA) * Retarder * Electronic stability program (ESP) * Disc brake * Full-brake assistant * MAN AttentionGuard driver attention warning system * Side deflectors between axles * Sliding/tilting sunroof, glass version * Stand-alone air conditioning, electric * Battery main switch * Lane Change Assist (LCS) and turning assist * Lane Departure Warning System (LDW) * Cab L (long) * External sun visor, transparent * Electrically adjustable and heated exterior mirrors * Air horns, cab roof * Rain sensor * Roof and side deflectors on the cab * Cab GX – the maximum (wide, long, extra high) * Cab suspension, air-sprung * Central locking with remote control * Immobilizer (transponder) * MAN Idle Speed Driving transmission function * MAN TipMatic 12 26 DD transmission with retarder 35 * Automatic climate control * Hot water auxiliary heater * Heated driver's seat * Fuel tank 490 liters * Fuel tank 370 liters * Headlight cleaning system * Engine version Euro 6, E * Video turning assistant system (VAS) with display * MAN EfficientCruise (GPS-based cruise control) * EfficientRoll transmission function * Freewheeling transmission function * Engine version with AdBlue Ndodpfxjzzta Dj Ab Uob * Air-sprung driver's seat * Cornering light * High beam assistant * Lower bunk * Upper bunk * Adaptive cruise control (ACC) with stop-and-go function * Driver comfort package * Electric front windshield roller blind * Refrigerator in drawer under bed * EBS * Without spare wheel ----For sale to commercial customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: used, mileage: 2,050 km, power: 90 kW (122.37 HP), first registration: 08/2025, fuel type: electric, overall weight: 2,490 kg, fuel: electricity, energy efficiency: A, color: white, gearing type: automatic, suspension: steel, number of seats: 2, total width: 2,159 mm, total height: 1,838 mm, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, E07 Hill-start assist, F2W Winter package, H1K Pre-conditioning, JP7 Blind spot assist, SA4 Airbag for driver and front passenger, 502 Digital extra: Updates for intelligent speed assist, 805 AEJ X4/1, B25 Parking brake, electric, BA3 Active brake assist, BB0 Brake system with ABS and ASR, BB3 Electronic stability program (ESP), C1J Gear shift knob in leather, C6L Multifunction steering wheel, CK1 Paint finish 1, CK8 Steering wheel heating, CL1 Steering wheel adjustable in height and inclination, CL3 Leather steering wheel, CM0 Bumpers painted, D50 Partition, continuous, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1K Navigation package, E1W Selection of recuperation levels, E2J AC charging 22 kW / DC charging 75 kW, E2K Charging cable Mode 3 (Type 2, 3x32A, 22kW) 5m, E38 Extended range, E3N Digital extra: Extended MBUX functions, E3P MBUX multimedia system and navigation with 9.5-inch display, E4S Digital extra: Smartphone integration, E8T High-voltage battery (45 kWh), EB1 45 kWh battery - water-cooled, EC5 Pre-installation for digital extras, EW5 Digital extra: Remote and Charging Premium, EW8 Digital extra: Remote and Navigation Services, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2U Parking assist, rear, F49 Heated windshield, F4W Windshield washer reservoir with increased volume, F58 Mirror in driver's sun visor, F59 Exterior mirrors, electrically foldable and adjustable, F79 Stowage compartment on instrument panel, FE3 Electric windows, front with comfort control, FG1 Armrest with stowage compartment, FQ3 Glove compartment, closed, passenger side, FR8 Reversing camera, GA2 Automatic transmission for electric drive, H10 Seat heating for driver and front passenger. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! More:!! Nodpfxjzyyrqs Ab Uedb Leasing/financing and trade-in possible!! !! !! - Errors and prior sale reserved!! - All information without guarantee ... more on our homepage.

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Nsdpfx Asw El Nhjb Ujdb

Condition: like new (used), Year of construction: 2013, IMA COMBIMA 2013 - 2x loading / unloading station - for PVC, ABS & solid wood edges - U-form layout - with KFA 20 aggregate - immediately available Ndjdjtxtkxopfx Ab Ujb For more Info, Video and technical specs, please contact us.

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen Ndjdpfx Abezuyqve Ujb - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm Njdpfx Abszuyqie Usdb - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L Ndodjzuyp Espfx Ab Ueb - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Nodozuypxspfx Ab Ujdb Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces Njdpfszuyprjx Ab Ujdb - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Nodpfx Abozuyple Ujdb Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. Njdpfx Aezuykveb Ujdb 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid Ndodpfx Abezuyi Ee Uob - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2005, Edge banding machine Manufacturer: IMA Type: Advantage 600 Year of manufacture: 2005 Technical data - Joint milling - Gluing unit for thin and thick edges - Imprint zone - 2x edge trimmers - Flush trimming - Multi-function trimming unit (MFA) - Profile trimming blade - Surface trimming blade - Buffing - Return system at the upper pressure roller Note: Ndjdpezuyirsfx Ab Ujb The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Nsdpfjzuyhnsx Ab Uodb Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports Ndjdpfx Aezux Tisb Usb - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication Ndjdpfx Abszuw Rte Ujb - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, mileage: 7,24,149 km, power: 375 kW (509.86 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 18.510 4x2BLS VIN: LP140016 Chassis / Attachments: - Leaf/Air suspension - Wheelbase: 3,600 mm - Tires: 315/70 R 22.5 - Condition: Front approx. 80% | Rear approx. 50% tread - 2 x 580L aluminum diesel tanks - 1 x AdBlue tank Engine / Transmission: - 375 kW (510 hp) / 12,419 cc / Euro 6d - ZF intarder - ZF automatic gearbox - Differential lock Cab Equipment: - XLX driver’s cab - 2 beds - Auxiliary heater - Automatic climate control - Stationary air conditioning - Refrigerator - Hands-free system - Radio CD - AUX, BT, USB Nedpfx Abjyg Tcko Ujdb - Navigation - LGS = Lane Guard System (lane departure warning) - ACC = Adaptive Cruise Control (distance control) - Emergency brake assist Weights: - Gross weight: 18,000 kg - Payload: 9,917 kg - Unladen weight: 8,083 kg Miscellaneous: - 1 previous owner - German registration - New MOT (main inspection) available on request New main inspections / safety checks or weight reductions/increases are available on request. We are happy to assist with export/transfer license plates, as well as delivery of your purchased vehicles within Germany. Contact us! We speak German, English, and Russian! ---- No liability for typographical and printing errors; subject to changes, prior sale, and mistakes! Your RL-Leible Team! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s core strength lies in the distribution of new and used commercial vehicles. On 11,000 m², we offer a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is particularly important to us, we offer our customers an excellent all-around service package and provide a competent contact person to support them throughout their buying or selling process. See for yourself! Our service for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We can assist in organizing special transports for your vehicles. Temporary/export license plates We are happy to help you obtain export license plates/short-term license plates. Customs formalities We will gladly assist you with handling custom formalities.