Used Isocell Isoblow Profi Twin Turbo 2022 for sale (6,240)

Condition: new, HAZEMAG AP-PH 2022 impact mill 2,200 x 1,800 mm unused - never put into operation year of construction: 2008 Rotor diameter: 2,000 mm Weight: approx. 98 tons Capacity: approx. 1,200 tons Engine: 1,100 kW already dismantled and ready for loading Lrjdpjt Ubbcefx Akmju + HAVER & BOECKER feeder 9,000 x 2,000 mm Weight: approx. 35 tons Engine: 4x 30 kW + HAVER & BOECKER 2 deck vibrating screen DSS 6,000 x 2,100 mm Type: DSS 2100 x 6000 Decks: 2 Weight: approx. 28 tons Motor: 75 kw

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. Lrsdpforzhflox Akmsu * Direction of rotation: from longitudinal to transversal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Lsdeurf I Uepfx Akmoru Areas of use: medical, food: storing vegetables and fruits. The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Price: 7,900 Euro + VAT, negotiable, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2022, condition: new, Niro-tech RX-150 single shaft paddle mixer This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity. The dimensions of the machine: 1300 x 700 x 1600 (all in mm) More photos and full specifications: / Ledpfxshqnpps Akmsru

Condition: new, new ! Lodjzwu D Njpfx Akmeru all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,3 / 4,4 kw inspection gantry safety lid CE-approved Suitable for loader with “Easy Connect” overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) infeed height : ± 1.350 mm dimensions drum : (l x w x h) : ± 860 x 670 x 565 mm + Loader for eurobins

Condition: new, functionality: fully functional, GS-1200 twin-shaft industrial shredder - low-speed, high-torque size reduction for the tough material that chokes single-shaft machines and hammer mills. Two counter-rotating shafts with 48 intermeshing shear cutters pull material in and cut it down - no daily sharpening, no babysitting. PLC control reverses the shafts automatically if a hard object jams the chamber. KEY SPECS - Cutting chamber: 47 x 24 in (1,200 x 600 mm) - Cutters: 48 rotary shear cutters, 9CrSi alloy tool steel - Motors: 2 x 30 kW (60 kW total / 80 HP) - Capacity: approx. 5 tons/hour, depending on material Lredps Adylpofx Akmju - Footprint: 159 x 71 x 91 in - hopper can be customized RUNS ON: food and organic waste, green waste and plant fiber, wood and pallets, plastics, rubber and bulky solids. Pair it with our CT Series screw presses for a complete shred + dewater line - one supplier, one responsibility. A working shredding video is included with this listing package. Built to order - electrical built to your plant (480V or 440V, 3-phase, 60 Hz). Full spec sheet available, just ask. ZEN SURFACE LLC. Message us through this listing for details, pricing and a live material demo.

Condition: used, mileage: 1,25,000 km, fuel type: diesel, Year of construction: 2022, CITROEN C3 Year 2022, 1.5 diesel engine, 2 seats, light commercial vehicle, 4 doors, 125,000 km, air conditioning, factory stereo, one owner, 1-year warranty. Financing or leasing available on site. Price excludes VAT. Lredpfx Akjy An Alsmeu

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 x Loma Systems IQ2F / IQ3 twin-head metal detector with alarm and belt stop on detect reject system, mounted on a height-adjustable frame. Manufacturer - Loma Systems Date of manufacture - 2010. Serial number IQ3 standard head - MD301-12429D. Aperture dimensions: IQ2F Ferrous-in-foil head - 370mm wide x 135mm high (105mm useable) / IQ3 standard head - 350mm wide x 150mm high (115mm useable). IQ3 standard head frequency - Variable. Handing - Left to Right. Belt type - rubber. Belt dimensions - 2600mm long x 300mm wide. Ledpoy Hinkjfx Akmjru

Condition: used, Year of construction: 2022, Circular saw complex Manufacturer: WoodVER Type: UPK-1 Year of manufacture: 2022 Technical data Maximum diameter of the log being processed: 1000 mm Length of the log being processed: 2.0 - 6.5 m Ledpfxozuy Axs Akmeru Saw diameter: 550 mm Saw rotation speed: 1500 (3000) RPM Power of the main motors: 2 x 18.5 kW Productivity: 12 - 20 m3 / shift - Automatic feed of the carriage with adjustable travel speed - Digital ammeter integrated into the control panel - Three-part frame with two guides for perfect geometry - Remote control with CNC system - Three-stage soft start system - Laser pointer for cutting lines - Digital cameras with an 18.5-inch display, installed in the remote control - Four hydraulic side clamps, four end clamps - Hydraulic log tilting device that performs the function of log tilting and simultaneously serves as the log centering device on the frame. - Scraper conveyor Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, operating hours: 131 h, lifting height: 4,000 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, YEAR OF MANUFACTURE: 2022 HOURS: only 131h! JCB TELEHANDLER TLT35-22E - Fully electric industrial telescopic handler - Lifting height: 4.00 m Load capacity: 3,500 kg - Immediately available & directly from the JCB dealer! - - CommandPlus cab with heating, driver's seat with air suspension + heating - Joystick control / single-lever control like on wheel loaders / telescopic loaders - Load moment indicator with overload cut-off according to EN15000 - LED lighting front and rear - 1x charger - 1x auxiliary hydraulics (side shift) - Reversing warning device "noise" - BlueSpot (optical warning device) - Pneumatic tires: Front 27x10x12 & Rear 21x8-9 Lrsdpfx Akjzbgnpjmou - Radio - LiveLink telemetry system hardware incl. remaining license - 1x hydraulic quick coupler - 1x pallet fork FEM3A with fork tines 1,200 mm - 1x side shift, integrated - 1x hydraulically secured quick coupler - We are a JCB contract partner (A-dealer) - We kindly request that you arrange an appointment before your visit. Please contact Mihm Sebastian (tel.: Do you need transport? We work with various logistics companies. Unless otherwise stated, the sale of used vehicles is without any guarantee or warranty. We are an authorized Mercedes Benz service partner, JCB contract partner, IVECO contract partner and MAGNI contract partner. Always over 700 trucks / commercial vehicles, used & new construction machinery, aerial platforms, forklifts, telescopic loaders and more! This offer is non-binding. Errors and prior sale excepted. Power steering, cab = Further information = Lifting capacity: 3,500 kg Overall height: 224 cm Please contact Tobias Ebert for further information.

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines Lrjdpfx Akjyt Hu Tsmeu - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used . More photos and full specifications: /

Condition: new, bore capacity in steel (diameter) 30 mm throat 250 mm bore stroke 130 mm spindle taper MT 3 MK table: 380 x 380 mm column diameter 98 mm turning speeds 75 - 3200 U/min feeds mm/U total power requirement 1,1 kW weight of the machine ca. 220 kg. range L-W-H 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Lsdpou Imc Hofx Akmeru Packaging dimensions: 2100x400x710mm Weight 260kg

Condition: used, Year of construction: 2022, Horizon Booklet Production Line SPF-200L, FC-200L, VAC-600Ha, VAC-600Hm, VAC-600Hm, VAC-600Hc The Horizon booklet production line featuring the models SPF-200L, FC-200L, is a state-of-the-art, modular solution for the efficient production of saddle-stitched booklets – including A4 landscape format. The system is suitable for both offset and digital printing and is especially designed for small to medium print runs. Thanks to the combination of collating machines (VAC-600Ha, VAC-600Hm, VAC-600Hm, VAC-600Hc), booklet maker (SPF-200L), and front trimmer (FC-200L), the line offers maximum flexibility and productivity in post-press processing. Special Features - Automated Settings: All format and production parameters are automatically set via a large, intuitive color touchscreen – including fold roller gap. - A4 Landscape Capability: The SPF-200L enables the production of booklets in A4 landscape format, making it particularly versatile. - Modular Expandability: The VAC-600 collating towers are modularly expandable from 6 up to 60 stations and allow non-stop operation through double-cycle and insert programs. - High Speed: Up to 9,500 cycles/hour for collating and up to 4,000 booklets/hour for stitching (3,500 in landscape format). - Flexible Configuration: Can be combined with additional Horizon feeders and digital print feeders for hybrid production lines. - Versatile Formats: Processes formats from at least 148 x 120 mm up to a maximum of 610 x 350 mm (SPF-200L). - Robust Wire Processing: Various stitching heads available for different wire gauges and loop stitching. - Easy Operation: Large touchscreens on all main modules for rapid setup and error diagnosis. Lrjdjxtag Iopfx Akmeu Technical Specifications - SPF-200L Format Range (min-max): min. 180 x 105 mm, max. 610 x 350 mm - SPF-200L Speed: up to 4,000 cycles/h (3,500 cycles/h landscape) - SPF-200L Features: A4 landscape, fully automatic - FC-200L Format Range (min-max): Front trimmer, integrated - FC-200L Features: Final trimming - VAC-600a/c Format Range (min-max): min. 148 x 120 mm, max. 500 x 350 mm - VAC-600a/c Speed: up to 9,500 cycles/h - VAC-600a/c Number of Stations: 6–60 - VAC-600a/c Features: Modularly expandable, non-stop - Booklet Thickness: up to 100 pages (depending on paper) - VAC-600 Loading Capacity: 55 mm per station - Weight SPF-200L with FC-200L: approx. 831 kg - Machine Dimensions SPF-200L with FC-200L: 4,271 x 810 x 1,250 mm (L x W x H) - Power Supply: 230 V, 5.3 A; 1.0 kW (SPF-200L) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Twin Shaft Mixer, Twin Shaft Powder Mixer, Twin Shaft Feed Mixer, Halvor Forberg 2000LH, Used Machine Manufacturer: Halvor Forberg Model: 2000LH Overall dimensions: 2660 x 3280 x 2450 mm Mixing paddle size: 375 x 330 mm Mixer type: Twin shaft Ledpfx Aksxt Nuzjmoru Bottom plate: Openable – product discharge is pneumatic

Year of construction: 2018, condition: excellent (used), Orbmix N&N Mix 450E twin shaft paddle mixer with most options - EasyClean, tote bin loader, touchscreen, pneumatic opening etc. Beautiful condition. Lrodpfok Raw Rjx Akmju

Condition: good (used), Approximately 96m twin track rail system available from closed meat factory. Lodsq Ii S Eepfx Akmsru

Condition: good (used), functionality: fully functional, Important note: The machine is currently still located at the customer's site – available at the beginning of 2027. Robust WEIMA ZM 30 twin-shaft shredder for shredding wood waste, offcuts, and similar materials. The machine features two slow-running shredding shafts and a generously sized feed hopper. Due to its low speed and robust design, the machine is well-suited for use in carpentry workshops, joineries, and wood processing companies. Technical data Lrsdpfjzxrxgjx Akmeu Manufacturer: WEIMA Maschinenbau GmbH Type: ZM 30 Year of manufacture: 10/2002 Machine no.: 900-789 Motor power: 2 × 11 kW Total motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Current consumption: 55 A Speed: 25 rpm Cutting width: approx. 460 mm Screen hole size: Ø 20 mm Hopper opening: approx. 600 × 1,240 mm Dimensions: approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Operating hours: approx. 4,188 hours according to the operating hour meter Equipment Twin-shaft cutting system 2 separate drive motors, each with 11 kW Large feed hopper Screen with Ø 20 mm holes Emergency stop Control cabinet / electrical control The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: refurbished (used), Year of construction: 2013, operating hours: 4,469 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical systems – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2013 Operating hours: 4,469 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 500 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Lrsdpoz Ikafsfx Akmeu Voltage: 24 V Battery weight: 190 kg

Condition: used, Year of construction: 2012, 2012 MultiWeigh HDW 20-40-60 TWIN multihead weigher with 20 weigh hoppers – used 20-head multihead weigher in TWIN configuration, built for frozen meat. The MultiWeigh HDW 20-40-60 TWIN is a multihead weigher with twenty weigh hoppers, made by HD-Wiegetechnik in Wetzlar. Thanks to the TWIN configuration the machine can run as two weighers and discharge two portions at once, or use all twenty hoppers for one heavy portion. The range runs from 230 grams to 5 kilos per weighment, with a 5-gram scale interval. The machine was built for frozen meat (product range 0 to -15 °C): dimpled stainless steel contact parts the product does not stick to, a wash-down IP65 build and an IPC controller with colour touchscreen. Built in 2012, complete with dispersion cone, feed pans and accessories. It is in Emmeloord and can be viewed and tested with your product. Key features - Twenty weigh hoppers in TWIN configuration: two portions at once or one heavy portion - Weighing range 230 grams to 5 kilos, 5-gram scale interval - Built for frozen meat, product range 0 to -15 °C - Dimpled stainless steel contact parts, wash-down (IP65) - IPC controller with colour touchscreen and a programme per product - Complete with dispersion cone, feed pans and accessories Why a TWIN weigher For every weighment a multihead weigher picks the combination of hoppers that comes closest to the target weight. With twenty hoppers the controller has plenty of combinations to choose from, and in TWIN mode the machine splits them over two outlets. One weigher then feeds two packaging machines or two lanes. For large portions you run all twenty hoppers to a single outlet. That makes the machine suitable for small retail packs as well as foodservice portions of up to 5 kilos. Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Multihead weigher, TWIN configuration Condition: Used Lredpfsz Hqzgox Akmju Number of weigh hoppers: 20 Weighing range: 230 - 5,000 grams Scale interval: 5 g (dw) / 10 g (d), accuracy class X1 Product: Frozen meat, 0 to -15 °C Controls: IPC611-W1200 with colour touchscreen Construction: Stainless steel, dimpled contact parts, IP65 Connection: 400 V, 50 Hz; compressed air 6 bar

Condition: used, Year of construction: 2022, operating hours: 6,731 h, functionality: fully functional, machine/vehicle number: 20804731, type of input current: three-phase, overall weight: 1,695 kg, input voltage: 400 V, total width: 3,405 mm, total length: 3,900 mm, total height: 1,310 mm, volume flow: 29,000 m³/h, space requirement height: 1,310 mm, space requirement width: 3,405 mm, space requirement length: 3,900 mm, filter area: 540 m², suction capacity: 29,000 m³/h, compressed air connection: 4 bar, power: 45 kW (61.18 HP), input frequency: 50 Hz, transport length: 3,900 mm, transport width: 3,405 mm, Plymovent MDB-36 PRO central extraction system for welding fume and dust extraction. Year of manufacture: 2022, used. For sale is a complete central extraction system consisting of a filter unit, fan, frequency converter, piping system, extraction arms, spark arrestors, shut-off dampers, sensors and other accessories. The system will be sold as a complete package according to the scope of the offer. Technical data: - Manufacturer: Plymovent - Type: MDB-36 PRO - Year of manufacture: 2022 - Filter area: 540 m² - Extraction volume flow: approx. 29,000 m³/h - Fan power: 45 kW Lrsdpfx Aksztmw Tomju - Weight: approx. 1,695 kg - Dimensions: approx. 3,900 x 3,405 x 1,310 mm - Filter cartridges cleaned with compressed air - Frequency converter included Scope of supply: - MDB-36 PRO filter unit - 36 filter cartridges CART-PTFE/15 - 45 kW fan in soundproofing box - Frequency converter VFD-45 - Pressure sensor PT-2500 - 2 x SparkShield-500 spark arrestors - Piping system - 7 x KUA-160/4H extraction arms - ERC-5.8 extraction rail with support consoles - Automatic shut-off dampers - Switching devices and sensors - Exhaust/recirculation switchover - Louvre silencer - Other accessories according to the scope of the offer Inspection possible by appointment. The system is sold in its current condition. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. Sale in current condition. Note: The system is currently disassembled and not connected. Before being taken out of service, the system operated perfectly and without any known functional faults. An inspection is of course possible, but a demonstration under power cannot be carried out at present. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. The information on documentation and certification, operating hours and machine/vehicle number will be supplemented and provided later. If you have any questions or are interested, please send us a message. We will gladly provide further information and additional pictures upon request.

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 5,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 710 mm, spindle motor power: 43,000 W, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 was manufactured in 1998 and retrofitted in 2022. It features a maximum nominal turning diameter of 270 mm and a turning length of 710 mm. The machine has a maximum spindle speed of 5,000 RPM and a robust tool system with 12 positions. If you are looking to get high-quality turning capabilities, consider the Index G300 horizontal turning machine we have for sale. Contact us for further details. Lrodpfjzzq E Dox Akmou - RETROFIT IN 2022- Max. Nominal Turning Diameter: 270 mm- Turning Length: 710 mm- Max. Swing Diameter: 590 mm- Machine Weight: approx. 6,550 kg (Cabinet weight: 710 kg)- Floor Space: approx. 8/10 m²- Spindle Collet Clearance: 65 mm- Spindle Diameter in Front Bearing: 110 mm- Spindle Nose: ISO 702/1 Size 6- Max. Torque (100%): 275 Nm- Tailstock: Electrically movable- Distance Between Centers: 740 mm- Max. Pressing Force (electric): 10,000 N- Compound Slide 1 XYZ (top) Travel (X-axis): 215 mm- Compound Slide 1 XYZ (top) Travel (Y-axis): 180 mm- Compound Slide 1 XYZ (top) Travel (Z-axis): 710 / 1,250 mm- Feed Force (X-axis): 8,000 N- Feed Force (Y-axis): 16,000 N- Feed Force (Z-axis): 13,000 N- Rapid Traverse Speed (X-axis): 20 m/min- Rapid Traverse Speed (Y-axis): 7.5 m/min- Rapid Traverse Speed (Z-axis): 20 m/min- Axis Resolution (X-axis): 0.0005 mm- Axis Resolution (Y-axis): 0.0005 mm- Axis Resolution (Z-axis): 0.001 mm- Number of Tools: 12- Tool System: DIN 69880 (Ø30x55 mm)- Complete documentation available Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2010, operating hours: 7,191 h, functionality: fully functional, machine/vehicle number: W09430219A2D38810, overall weight: 19,000 kg, We are selling our used Doppstadt shredder (year of manufacture 2010) with no warranty of any kind. The machine is ready for operation and is currently used in our facility for shredding disposable pallets and green waste. Lrsdpfszv Hzwex Akmou

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,000 h, includes 3x Brabender gravimetric dosing units includes stand Ljdpfsz Eu S Tjx Akmoru includes chiller includes temperature control unit includes 1x side feed; a second LSB (lateral screw feeder) is also included, and installation is possible on each cylinder. More information available upon request. Inspection is possible in Hilpoltstein.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Ljdpfx Akozhnlujmoru

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Ledpfxsz Ikzpe Akmeru Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.