Used Kodak Achieve Tee for sale (2,391)

Condition: used, Year of construction: 2006, Like new, barely used. Hnsdezyln Dopfx Ah Set

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm Hsdpfxowpknwo Ah Sont • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: good (used), Year of construction: 2007, Gebruikte pons knipmachine van Peddinghaus Type Peddimaster 110/170 Capaciteit ponsen 110ton Capaciteit knippen 170ton Inclusief zij aanslag en diverse gereedschappen Hnsdpfezul Adsx Ah Sot

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. Hjdpoq H H Ruefx Ah Sjnt In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: used, The device is ready for operation. The machine has two weighing systems, meaning that while one system is dispensing, the other is filling, and they alternate. When both systems are full, the machine shuts down. The output for a 20 kg bag is 5500 kg, and for a 10 kg carton, it is 3500-4000 kg. The total height of the machine is 3500 mm. The machine also includes a receiving/inspection conveyor equipped with a scale. Hnjdpfx Aezhfypsh Sot Please check out my other listings.

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Hnjdpfx Aexizaneh Sjt

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Industrial Fine Grinding and Micritization System Complete industrial disintegrator system designed for the intensive fine grinding and micritization of dry materials into a fine, uniform powder. The DESI-14 uses high-intensity impact technology to achieve efficient particle-size reduction. It is suitable for processing a wide variety of dry materials, including minerals, fertilizers, fillers, catalysts and polymers, as well as food and biological raw materials such as grains, cereals, casein and dry yeast. The system can also be used for the fine milling and micritization of grains and other suitable food ingredients in applications requiring a very fine flour or powder consistency. Depending on the processed material and operating configuration, the system is designed to produce particles in the approximate range of (0.5 –100 μm), with a maximum processing capacity of approximately 1–2 tones per hour. Rotor configuration: 6-row rotor set Number of rotor sets included: 2 sets, each consisting of 2 rotors Wear protection: Impact surfaces protected with HARD 60 wear-resistant alloy Cooling: Water-cooled housing and cover Disintegrator dimensions: 1,570 × 1,160 × 1,300 mm Disintegrator net weight: 850 kg Maximum airflow: 1,000 m³/ Condition: Excellent and fully operational Location: Zagreb, Croatia Availability: Immediately available Hnsdpszy Nbhefx Ah Sot

Condition: new, NOISE BARRIER PRODUCTION LINE The noise barrier production line includes several machines, such as: Decoiler, Straightener Feeder, Main Roll Forming Machine (150 T, H-type), Punching Device, Cutting Machine, and Stacking Unit. Hjdsziwvlspfx Ah Ssnt IN ADDITION Custom-made hydraulic scissors (standard, non-length cut) – Servosteel Türkiye TS EN 1793-1 (absorption) certificate TS EN 1793-2 (insulation) certificate 3 aluminum molds for the A140 series (System Aluminum Türkiye) 3 aluminum molds for the A160 series (System Aluminum Türkiye) A140/A160 side cover EPDM wicking mold

Condition: used, functionality: fully functional, Equipment: foot remote control, We are selling a well-maintained profile steel shear/punching machine, Peddinghaus Type 210 AD/13, from our workshop. Integrated functions: Hole punch Bar steel shear Profile steel shear Flat steel shear Notching device The machine thus combines several processing steps in a compact unit and is ideally suited for flexible use in steel and metal construction. Condition: The Peddinghaus is in perfect working order and is ready for immediate use. Accessories: Various tools included Foot pedal available Important note: Due to the machine's high weight, shipping is unfortunately very difficult or only possible with significant logistical effort. We therefore recommend picking it up. Inspection: The machine can be inspected on-site at any time and tested during a trial run – this way, you can convince yourself of its functionality. Hjdpjziz Ewefx Ah Sjnt We are available to answer any questions and provide further details.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Hnjdpjxn T Smefx Ah Sst Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Halvor Forberg paddle mixer stainless steel Type: F60 Capacity: 60 liters Equipped with 2 lump breakers Hsdjxc I Ewopfx Ah Sjnt Equipped with discharge hopper See our other advertisements VMA Wekerom

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) Hnedpfx Ahszzvhdj Sot • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Automatic wire threading with thermal wire cutting, Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Hnjdpfxozhvhwe Ah Sst Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Hnodpfxoqabiao Ah Sst Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Hodpfxjy Awzks Ah Sent Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos With 1 piece square pin HS-Code: 8462 5900

Condition: ready for operation (used), 🏗️ FOR SALE | Dismantlable Steel Structure – approx. 600 m² 🏗️ Available soon! We will be dismantling this warehouse ourselves this week. The complete steel structure will be carefully dismantled and is ready for transport. Dimensions: 📏 Width: approx. 30 meters 📏 Depth: approx. 20 meters 📐 Area: approx. 600 m² 📏 Height: approx. 5.5 meters 🚪 Clear door height: over 4 meters Specifications: Hnedpfx Ajzm Un Hoh Set ✅ Fully self-supporting steel structure ✅ Three interconnected halls (without partition walls) ✅ Large access doors, ideal for trucks and machinery ✅ Includes internal office space ✅ Suitable for storage, workshop, production, or agricultural use 💪 The warehouse will be professionally dismantled by us, ensuring that all parts are neatly prepared and ready for transport. 🚛 We can arrange or organize transport if desired. 📩 Interested or have questions? Please feel free to contact us!

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Hedpfew Iqvqox Ah Sont Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: excellent (used), axle configuration: 2 axles, first registration: 06/1972, suspension: steel, color: orange, Year of construction: 1972, Despite the care taken to ensure the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = Axle Configuration Axle Brand: BPW Brakes: Drum brakes Suspension: Leaf spring suspension Hnsdpfx Ahezw U Syo Sjt Rear Axle 1: Twin tires Rear Axle 2: Twin tires Weights Unladen weight: 8,000 kg Payload: 180,000 kg GVW: 26,000 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1100 DG, total length: 2,300 mm, total width: 2,300 mm, total height: 2,300 mm, type of input current: AC, pivoting range: 120 °, input voltage: 400 V, overall weight: 5,400 kg, cutting range round steel at 45°: 510 mm, cutting range round steel at 90°: 510 mm, space requirement height: 2,500 mm, space requirement length: 2,300 mm, space requirement width: 4,400 mm, cutting range square steel at 45°: 700 mm, We are offering this used MEBA MEBASteel 1100 DG double mitre saw, manufactured in 2014. Manufacturer: MEBA Model: MEBASteel 1100 DG Year of manufacture: 2014 Hsdozx N Tzepfx Ah Sjnt If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. Hsdpfxszxz T Tj Ah Sjnt TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. Hnsdpfxjwncv Rj Ah Sot ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Hnedpfx Ahjzw A Rwj Sot Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Condition: good (used), Year of construction: 2001, Used stainless steel container with insulation Last use: Pharmacy Item number: 10820 Volume: 5540L Operating pressure: +3/-1 bar Max. Operating temperature: +150 °C Type: Vertical on 4 feet Material (wetted parts): 1.4404 / AISI316 Design: Insulated Base: Dished base Tank dimensions: Cyl. height: approx. 1600mm Total height: approx. 3100mm Height of the feet: 800mm Outer diameter: 2000mm Distance from drain to floor: 120mm Materials: Inside: 1.4404 / AISI316 Outside: 1.4301 / AISI 304 Equipment: Rock wool insulation Flanged top floor Various connections on the top floor Hsdpsth Sc Njfx Ah Sjnt Dome cover on the top floor

Condition: excellent (used), Industrial Linear Cooker – Stainless Steel Hsdpfx Aszxcazoh Ssnt Industrial linear cooker made of stainless steel, designed for the continuous cooking and heat treatment of food products within industrial processing lines. The equipment allows for continuous and controlled heat treatment while the product moves through the processing zone, facilitating uniform production and integration with the different stages of an automated line. Its stainless steel construction, continuous transport system, and industrial design make it particularly suitable for processing plants for vegetables, fruits, and other food products. MAIN FEATURES -Type: Industrial linear cooker -Application: continuous cooking/heat treatment -Continuous processing system -Automatic product transport -Stainless steel construction -Product feeding zone -Heat treatment section -Continuous discharge -Motorized transport system -Integrated control panel -Hygienic design for the food industry -Robust construction for industrial use -Integrable into existing processing lines -Designed for continuous operation PROCESS The linear cooker is designed to perform continuous heat treatment of the product, eliminating the need to work in batch processes. The product is introduced into the equipment and advances in a controlled manner through the cooking zone, remaining for the established time to receive the required heat treatment. Subsequently, it is continuously discharged to the next stage of the process. It can be integrated with: Feeding systems Washers Peelers and cutters Conveyors and elevators Scalders Cooling systems Inspection belts Freezing equipment Fillers and packers Complete processing lines APPLICATIONS Particularly suitable for the fruit and vegetable processing industry, canning companies, frozen food manufacturers, and prepared food plants that require a continuous cooking or heat treatment system. Depending on its configuration and process conditions, it can be used for vegetables, legumes, fruits, and other food products that require a cooking or heat treatment stage before subsequent cooling, freezing, preservation, or packaging. Its continuous linear processing and stainless steel construction provide a robust solution for automated industrial lines for heat treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call Hjdpfx Ajwiq D Eeh Sent • RISK-FREE PURCHASE: 14-day return policy Details: