Used Krauss Maffei Berstorff Compounder + Side Feeder + Dosing Unit for sale (45,286)

Condition: refurbished (used), overhauled Rexroth double pump for Krauss Maffei SGM machines. Service, repair and exchange of hydraulic pumps Rexroth, Voith, Bosch, Moog. Itedpfx Aoyithlen Djf

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Itsdpfx Aouzn Nnjn Dsf Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Year of construction: 1999, Krauss Maffei 80-220 C2 (1999) Clamping force: 80 t Screw diameter: 35 mm Shot weight: 115 g Distance between tie bars V: 405 mm Distance between tie bars H: 405 mm Injection pressure: 1837 bar Type: Horizontal Iodewufwqspfx An Djtf Drive: Hydraulic

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System Itsdpfx Anoxqhfys Dof 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Iedpfx Ansl Hx Rde Djtf

Condition: used, Technical details: circulating medium: Druckluft dimensions L x W x H: 0,9 x 1,3 x 1,9 m Plastic granulate dosing sheet steel construction with angular steel base external operation supply tank: -Size L: 1250 x W: 670 x H: 680mm -content approx. 400Liter -granulate supply connection 1x blind plug and 1x pipe 300/400MM; filling via 2x connection inch over ceiling -operation discharge: regulation by connection of abrasive dosing valve (1x open+1x closed) and compressed air connection 1 1/2" x 450mm Dosing tank: -2 tank size Ø 300 x 560mm -outlet 1x1 1/4" and 1x1 " -equipment 1x level measuring unit each -air connection 2" -Water separator model F602G10WJ/N, pressure max. 17 bar / 250 PSI; temperature max. 65°C / 150°F Itodpfx Anou Nu Sfe Dsf *

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Itodpfx Anetu Ikcs Dof Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Isdsxz Ax Nopfx An Dstf Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Condition: excellent (used), functionality: fully functional, Dispenser/Dosing Unit made of stainless steel Overall dimensions: 1600 x 600 x 1900 mm Included equipment: 4 pneumatic dosing heads Itjdpfx Anjycl Iws Dof Height-adjustable base The dosing unit is designed for precise dispensing of products in production processes. Equipped with four pneumatic dosing heads, it enables simultaneous portioning of several product streams, significantly increasing the efficiency and repeatability of dosing operations in processing lines. The device is mounted on a height-adjustable base, facilitating adaptation to various types of workplaces and integration with other machines in packaging or filling processes. The pneumatic dispensers operate using air pressure, allowing for precise and hygienic dosing of products with different consistencies, commonly used in the food, cosmetic, or chemical industries.

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Itsdjxqx Avopfx An Dof Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: excellent (used), Pleiger hydraulic motor for Krauss Maffei MO 8000 Ijdpof Ri D Usfx An Detf No. 6257684

Condition: excellent (used), double pump for Krauss Maffei Maschines SY2DFE1-21/071-071 KM Nr. 6441936 Ijdpfx Anog I Uycj Dotf MNR: R900751978

Year of construction: 2009, condition: excellent (used), Pleiger hydraulic motor for Krauss Maffei Isdpfef N Ixusx An Djtf MOS 4500-05-2203

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) Itjdpfordyb Asx An Djf We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2016, operating hours: 23,170 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection pressure: 2,005 bar, injection weight: 618 g, mold height (min.): 330 mm, Injection molding machine Krauss Maffei 250-1400CX with robot and gas boost (225) Product Code: 225 Availability: In Stock Year of production: 2016 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Injection speed: 848 ccm/s Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Total day-light max: 1150 mm Type of controls: MC6 Language: German Power: 70 kW Ijdpfx Aevtzkfsn Detf Workinghours: 23170 h Weight: 15000 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes Picker or robot: Yes

Condition: good (used), Dosing unit / automatic sealing machine Lenhardt/Bystronic, Itjdpfx Anjr Hca Ro Dof B- Dosing unit for 2-component silicone (black), The dosing unit is well maintained and stored.

Condition: good (used), Dosing unit / automatic sealing machine Lenhardt/Bystronic Itodor Hcafopfx An Dsf A-Dosiereinheit für Polysulfid Die Dosiereinheit ist gut gewartet und eingelagert.

Condition: good (used), Dosing unit / automatic sealing machine Lenhardt/Bystronic, C- Dosing unit for 2-component silicone (grey), The dosing unit is well maintained and stored. Iedpsr Hcbyofx An Dstf

Condition: new, Krauss Maffei EK201 , serial no. according to photo,unused in opened original packaging, 100% functional, scope of delivery according to photos Isdpfxoi Ebwwo An Djtf

Condition: ready for operation (used), Year of construction: 2001, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 Itodpfxjnh Rwgs An Dsf TECHNICAL DATA CLAMPING UNIT - injection force: kN 8000 - distance between columns (h x v): mm 1120 x 1000 - distance of mold opening max: mm 1400 - mold installation height min/max: mm 600/1100 - opening stroke of the clamping platen: mm 2000 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 45 - dimensions of the machine (L x W x H): m 10,4 x 2,86 x 2,39 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Possible control updates to extend the lifetime of the plant - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS Isdpsnh Rnujfx An Dotf - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Year of construction: 2003, condition: good (used), functionality: fully functional, Platform with dual dispensing units. - Electrical cabinet - suction - differential pressure gauge - safety Isdpfsudwl Usx An Djtf - non-slip floor

Condition: excellent (used), Year of construction: 2007, I sell the double end cutting and tenoning machine SCM CONCEPT NT. Working width up to 3000mm Configuration left side / fix: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Configuration right side / moving: 1 pc. cutting saw aggregate Iodpfxstv Rxbs An Dstf 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surfaces Itjdpfxexcgihe An Dsf Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design

Condition: refurbished (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC6 TECHNICAL DATA CLAMPING UNIT - injection force: kN 10000 - distance between columns (h x v): mm 1400 x 1120 - distance of mold opening max: mm 1700 - mold installation height min/max: mm 700/1200 - opening stroke of the clamping platen: mm 2400 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 65 - dimensions of the machine (L x W x H): m 10,98 x 3,29 x 2,49 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: Itjdpfx Asnh Rhvsn Dof - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!