Used veneer saws for sale (21)

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a joining unit and veneer stop table. A video of the machine in operation can be sent upon request. For cutting veneer without splintering and ensuring tight joints, including thick-cut veneer. Cutting length max. 4200 mm. The saw unit and joining unit are combined in a single unit, so only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with full-length finger stop, adjustable from approx. 2 - 50 cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2 kW. Fine-tooth blade with carbide inserts, sharpened. Joining blade with PCD inserts, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80 mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. On-board tools. Saw blade and secondary cutting blade freshly sharpened, so ready for immediate use. Bedpfo Ahrgaox Andodi Partially repainted. Dimensions approx. 5550 x 1200 x 1600 mm (L x W x H). Weight approx. 800 kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Bsdj Afznuepfx Andjdi Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Bsdpfxoyku U No Andodi Cutting height 45 mm Motor output 1,8 kW machine weight ab. 500 kg

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Bsdpfovvkazex Andedi

Condition: used, Cutting length: 3000 mm Bdjdsy Hrzaopfx Andsi Cutting height: adjustable, 0 - 45 mm Saw unit: 1.8 kW Clamping mechanism: operated via handwheel Location: Nattheim

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. Bdjdpfxsz Akftj Andoi -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 1 deck Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Bdodpfx Ajythdpendji Space requirement approx. 3000 x 1500 x 1800 mm Weight approx. 3000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Bedjwq D Tpepfx Andsdi Workpiece clamping by handwheel Year of manufacture 1978 Price 2800.-

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1524/1, Ludy machinery for cutting veneer and producing veneer edging. Suitable for the precise cutting of veneer into strips and for preparing edging for furniture manufacturing. Robust construction, simple operation, ideal for production environments. Bdedpfxozg Dpas Andji

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Bsdjzlqbaspfx Andodi Maximum cutting length: 3050 mm. Equipped with a rear finger stop.

Condition: used, Year of construction: 1982, Second-hand machine Condition: good Features and technical specifications: Cutting length (mm): 3,100 Cutting height (mm): 45 Saw blade diameter (mm): 180 Bdodpfezk Nvtex Andsi Depth to stop (mm): 500 Main motor: 1.8 kW Pneumatic clamp Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: at short notice

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit max. cutting length 3050 mm no rear stop included Bdedpeyizztjfx Andei

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Veneer saw Cutting length: 4000 mm Bdsdoyh It Rjpfx Andji Front and rear support tables Extraction duct

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Bsdpfx Anevvkblsdsdi Storage location: Nattheim

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head Bdsdpen An A Tsfx Andei cutting length 3050 mm with rear support and fence

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1999 Features and Technical Specifications: - For cutting all types of veneer - Tight joints and tear-free - Cutting length: 3020 mm - Opening height: 60 mm - Cutting height: 45 mm - Motor: 1.8 kW - Saw blade speed: 8700 rpm - Saw blade diameter: 180 x 16 mm - Includes a planing unit that can be coupled with or decoupled from the sawing unit - Horizontally and vertically adjustable - Joining blade head 85 x 50 mm, with 4 reversible blades - Front support table is adjustable (ball-bush guide) - With front support table and dust duct - Sliding stop from the front via position indicator - Veneer clamping via pressure beam using two external pneumatic cylinders - Rear support table with recessed measuring tapes and stop rail - Dimensions: 4780 x 1560 x 1290 mm - Weight: 520 kg Availability: Immediate Bedpfx Aszlbtysndodi Location: 63934 Röllbach

Condition: used, Used machine Bdodpfjzyyzxox Andoi Equipment and technical data:

Condition: used, Second-hand machine Condition: In working order Technical specifications: Working length: 3000 mm Handwheel tension Bedpjzk N E Ujfx Andjdi Drive unit 2 kW Availability: at short notice Storage location: Flörsheim

Condition: used, Second-hand machine Second-hand veneer saw from Scheer, model FM 2 - 3000 Bdedpfx Anozk N Ezodoi Clamping via hand-operated wheel Integrated extraction system Cutting length: 3000 mm movable Availability: at short notice Location: Röllbach

Condition: used, Second-hand machine Features: - Cutting length 2500 mm - with handwheel clamping Bdjdpfszk Nz Nox Andji Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Second-hand machine, cutting length 3,000 mm, with handwheel tensioning, availability: at short notice, location: Solingen Bodpozk Nvaofx Andsdi