Used Kuhlmeyer Bkk 1/2 for sale (1,07,298)

Condition: used, mileage: 4,14,220 km, power: 290 kW (394.29 HP), first registration: 07/2021, fuel type: diesel, number of seats: 69, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro6, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: Setra S419 UL, 69+2+1 seats, kitchen, WC (Vehicle 666) First registration: 22.07.2021 414,220 km Engine: 10,677 km Euro 6, D, M, N MOT valid until 07/2027, next inspection due 01/2027 Permissible total weight 24,000 kg Unladen weight 16,000 kg Payload 12,000 kg Overall length 14,980 mm, overall width 2,550 mm, overall height 3,355 mm 2 doors Additional headlights Trailer coupling 69+2 seats Fully automatic transmission Automatic climate control, auxiliary heater On-board kitchen WC with washbasin ALCOA alloy wheels Tires 295/80R22.5, 1st approx. 80/50%, 2nd approx. 80/80%, 3rd approx. 60/90% 3rd axle steerable + liftable, relief axle Podpfxjzwazgj Aphjgr Fabric seats with leather cushions and red seat edging Large screen Radio/CD Microphone Multi-function steering wheel Vehicle is currently being prepared Price: €219,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €5,000.00 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: new, Schunk SRU+ 40-W / 30052464 Universal swivel unit + 2 x PZN+ 100-1 / 303312 Universal gripper + SGE / 30077266 + 6 x BSWS-B 100 / 303027 quick-change jaw system, unused, 100% functional, scope of delivery as shown in the photos. Pgedpsi Ec Nksfx Aphsr

Condition: ready for operation (used), Indramat MAC 71A-0-ES-2-C/095-A-1 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, used, with normal signs of wear, 100% functional. Pgodji D Iktopfx Aphor

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Pgjdpfx Apji D Ii Ijhjr

Condition: new, Indramat MAC112B-0-GD-2-C/130-A-1/S005 Permanent Magnet Motor, serial number: MAC112-10094, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Pgodpfsi D Ipuox Aphsr

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor, serial number: MAC115-04930, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pgjdpfxji D Irhj Aphsr

Condition: ready for operation (used), Schmalenberger ZHT4 32-13/2-7.5 submersible pump, serial number: 9700005166/1, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Pedpfx Aji D Nvcjphegr

Condition: new, Lubrix MQL system 0003055 (M12) G 1/2 DN 15, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Pgjdpei Eby Sefx Aphjr

Condition: new, Schunk SRH+40-WP /30061820 Pneumatic rotary indexing unit + 2 x part no. 125-1 / 30043071 Universal gripper, unused, 100% functional, scope of delivery as shown in the photos. Pjdpfx Apsi Ec Ngohogr

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005, serial number: 68351, permanent magnet AC servo motor, mounting hole spacing: 152x152 mm, drive shaft diameter: 32 mm, used, shows normal signs of wear, 100% functional. Please request shipping costs separately! Psdei D Ii Dspfx Aphogr

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor, Serial No.: MAC093-56032, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Psdpfx Aei D Im Sjphogr

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as shown in the photos. Pgedpji D Ulyofx Apher

Condition: used, Adjustable feed (DISCO adjustment gearbox) Lenze gearbox, type 12 602 20 1 3 2/81 Podpfszrxvfex Aphsgr Technical data: - P1: 3.0 kW - n1: 1,500 rpm - M2: 444–800 Nm - n2: 52–8.7 rpm

Condition: used, Year of construction: 1986, Surface Grinding Machine MONOPRECIS 1DR - #2 Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1986 Pedpfx Apjzwgrrshjgr Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

Year of construction: 2000, condition: used, 5 x Printing Insert 12 1/2 inch Psdpfx Apsdh Np Sohjgr 1 X File Hole unit 1 x Cross perforation cylinder

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Pjdpfx Apozwa Rbohegr Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Psdpfx Apezu S U Hshogr Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Pgedotql S Tepfx Aphjr Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: new, Festo solenoid valves (more pieces) Technical description: Valve function 5/2-way, monostable Type of actuation Electric Standard nominal flow rate 1,400 l/min pneumatic working port Sub-base Operating pressure 1.5 bar ... 10 bar Type of reset Pneumatic spring Nominal size 6.5 mm Mounting position optional Manual override Non-detenting Type of piloting Pilot actuated Symbol 00991049 Max. switching frequency 40 Hz Switching time on 28 ms Operating medium Compressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required) Media temperature -10 °C ... 60 °C Type of mounting On sub-base Pilot air port 12 G1/8 Pilot air port 14 G1/8 Pneumatic connection, port 1 G1/4 Pneumatic connection, port 2 G1/4 Pneumatic connection, port 3 G1/4 Pneumatic connection, port 4 G1/4 Pneumatic connection, port 5 G1/4 Note on materials Contains paint-wetting impairment substances Material seals NBR Material housing Wrought aluminium alloy Material membrane PUR Pgedpfx Apjh Rumishor

Year of construction: 2006, condition: like new (used), Built in 2006 Condition like new! Pedsd Hr Ncjpfx Aphjgr

Condition: used, This listing is for GE Healthcare AKTAprocess 1/2' Liquid Chromatography System Pgodpfxoxxycgs Aphjr The unit is in full working condition and ready for immediate use These can be viewed by appointment at Duxford The ÄKTAprocess is a fully automated process-scale liquid chromatography system designed for biopharmaceutical purification and manufacturing. It provides automated process control and is configurable for large-scale chromatography applications, with UNICORN software support Key Features: Advanced Automation & Control: Automated Liquid Chromatography System: Ensures precise and reproducible separations. UNICORN Control Software: Provides intuitive process control and monitoring. Post-Purchase Configuration Options: Enhances usability and extends system lifespan. Scalability & Flexibility: Designed for Large-Scale Biomanufacturing: Supports seamless scale-up from lab to production. Customizable Configuration: Thousands of setup possibilities for different applications. Three Flow Rate Ranges: Handles up to 1,800 L/h, enabling high-volume production. Quality & Compliance: Built with USP Class VI Materials: Traceable, regulatory-compliant construction. Intelligent AxiChrom Column Packing: Ensures optimal separation performance. Full Regulatory Documentation & Services: Supports cGMP compliance. Compact & User-Friendly Design: Integrated Computer: Reduces footprint and minimizes plant clutter. Robust & Reliable Construction: Engineered for long-term operation in industrial settings. Specifications: Weight 450 kg (990 lbs) Dimensions (cm) 41L × 33W × 64H Dimensions (in) 16L × 13W × 25H Benefits: Optimized for Bioprocess Scale-Up: Seamlessly transition from small-scale systems. Regulatory Compliance: Supports cGMP requirements with complete documentation. Highly Configurable: Adaptable to diverse biomanufacturing needs. Space-Efficient Design: Built-in computer minimizes workspace requirements. Applications: The ÄKTAprocess is ideal for biopharmaceutical production, including: Monoclonal Antibody Purification Vaccine Production Recombinant Protein Purification Gene Therapy & Cell Therapy Processing

Condition: excellent (used), functionality: fully functional, mileage: 5,580 km, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 7,300 kg, empty load weight: 6,600 kg, operation weight: 8,200 kg, number of seats: 2, Year of construction: 2012, operating hours: 5,580 h, Equipment: adjustable chassis, all wheel drive, differential lock, hydraulics, An authorized SUBARU dealer in Łaziska Górne presents a CATERPILLAR AP 300 paver. The machine has no accident history, comes from the first owner, and was used exclusively in Sweden. The AP300 is a small to medium-sized paver with a spreading width of 1.75 m to 4.0 m, making this model ideal for work on city streets, bike paths, sidewalks, shoulders, and other small to medium-sized areas. Pgsdpfx Apoy Szckjhor NOTE! We have two identical CAT 300 units available (see the last photos) - this orange one has only 2061 operating hours. The price is lower before refurbishment compared to the yellow one. A significant discount is available when purchasing two units. - Transport is possible within the European Union. ===•••===== A narrowing attachment allows spreading to a width of up to 700 mm (27 inches) for work in trenches and other narrow spaces. Technologically advanced options, such as eco mode, are available. Automatic filling, activation of the feeder system with a single touch, and an automated driving mode make the combination of this paver with the table an extremely efficient and versatile solution for small and medium-sized contractors. ====•••===== Machine type: Wheel-mounted asphalt paver Cat C3.3B engine Engine power 55 kW / 73.8 HP Operating weight 8000–8200 kg Transport weight 6600 kg Standard working width 1.75–3.42 m Maximum spreading width 4.0 m Minimum spreading width 700 mm Maximum output 406 t/h Max. travel speed 16 km/h Max. paving speed 61 m/min Wheelbase 1950 mm Transport and working dimensions Parameter Value Transport length 5029 mm Transport width 1938 mm Transport height 2645 mm Working length 5047 mm Working width 3180 mm Height with canopy 3415 mm Operating capacities System Capacity Fuel tank 110 l Engine oil 13.2 l Cooling system 9 l Flushing system tank 28 l Model features wheel drive providing good mobility on urban construction sites, ability to work in very narrow trenches (from 700 mm), automatic control of material feed, ECO mode to reduce fuel consumption, SE34 V or SE34 VT screed, good operator visibility and compact dimensions. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers - Please contact us directly by phone to get your best price :)

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer you a fully refurbished profile belt grinding machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of a machine of the PS1/2 type: Table length: 650 mm Table width: 600 mm Rail width: 15 / 30 / 40 / 50 mm Belt length: 2,700 / 3,200 mm Grinding height: 350 mm Table swivel: 45 / 20° Podozlidaspfx Aphegr Voltage: 400V Power: 1.4 / 1.85 kW Speed: 1,500 / 3,000 rpm Belt speed: 12 / 25 m/s Dust extraction nozzle diameter: 80 mm Dimensions: 1,200 x 2,450 x 2,100 mm Weight: 390 kg After the refurbishment, the machines feature an updated electrical system including a motor brake, are painted in RAL 7035 light gray, have refurbished idler and drive rollers installed, and come with a complete set of accessories. We look forward to receiving your questions and inquiries.

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Universal Thread Cutting Head 1/8 to 2 inch -Pipe size: 1/8 to 2" -Bolts: 1/4 to 2" Pjdpfozlf Rcox Aphogr -Dimensions: 280/240/85 mm -Weight: 5.8 kg

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Pgodot Hwylopfx Aphor Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.