Used Leitz Reference Hp 5.4.3 for sale (9,718)

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Godpfx Asz N Nrqjp Dokc

Condition: excellent (used), functionality: fully functional, For sale: a refrigeration unit designed to work with a NOMA kneading machine, used in equipment for kneading and processing meat. The unit is responsible for cooling the kneading machine system, enabling the maintenance of the appropriate temperature during the production process. This solution is intended for use in the food industry, particularly in meat processing plants. The unit is in good working order and is ready for installation and operation. We invite you to contact us for further information and to view the machine. Gedpfjz Nduxex Ap Djkc We have 3 units available.

Condition: used, machine/vehicle number: IC1284, Year of construction: 2015, operating hours: 7,285 h, load capacity: 1,200 kg, lifting height: 4,300 mm, fuel type: electric, mast type: simplex, construction height: 2,650 mm, Internationaler Transport möglich/ International delivery available Gjdpfx Asx Nlahjp Dskc Serial Number: 90483747 Internationaler Transport möglich/ International delivery available

Condition: used, Year of construction: 2005, functionality: unexamined, Equipment: CE marking, Belt grinding machine Manufacturer: Falcioni Type: Profitech Plus 5 Gjdpfx Aez Ritqep Dskc Year of manufacture: 2005 1 belt grinding unit, swiveling 4 brush grinding units, swiveling Conveyor belt width approx. 75 mm Dimensions approx. 5000 x 1700 x 2300 mm (L x W x H)

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake Gkodpfxoz I N D Ns Ap Doc - including foot switch and the bending tool located on the machine FCA D-35614 Aßlar - loaded onto a truck

Condition: used, mileage: 2,47,483 km, power: 96 kW (130.52 HP), first registration: 04/2018, fuel type: diesel, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,968 mm, loading space width: 1,853 mm, loading space height: 1,946 mm, Equipment: ABS, central locking, electronic stability program (ESP), * CD radio * Navigation system * Air conditioning Gkjdpoxtibhefx Ap Djc * 3 seats * Tow bar * 6-speed manual transmission * 2.5 t towing capacity * TÜV: Internal vehicle number: 11457----Subject to errors & prior sale.

Condition: new, functionality: fully functional, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,067 mm, loading space height: 400 mm, total length: 2,910 mm, total width: 1,500 mm, total height: 900 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz HIT 200 Tipping Trailer NEW VEHICLE Internal dimensions: 201cm x 106cm Total weight: 750 kg Payload: 622 kg Side board height: 40cm Internal height: 120cm Unbraked, single-axle, low-loader trailer Gjdpeznv T Tjfx Ap Dskc Removable side boards made of galvanized sheet steel Rear and front walls can be folded down and removed Tarpaulin cover, 120cm high, with steel frame Easily converted into a transport platform Bolted and galvanized steel frame Drawbar can be folded down Screen-printed plywood floor 13-pole electrical system Rear lamps with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards, 40cm - Aluminum cover with bracket for, e.g., a bicycle carrier - Flat tarpaulin with or without bow - Mesh, coarse or fine - Spare wheel with bracket - Ramps More accessories available upon request! Images are for illustrative purposes only and may show optional accessories that incur an additional charge. Plus vehicle registration document and transport costs to Gera: €100 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, DHP HYDRAULIC STATION LIFT - 1.5t DHP hydraulic bench jack is used for stepless lifting and lowering of material at assembly, loading and machining stations with table dimensions similar to EUR pallet, allows to maintain a constant working level when loading or unloading material. Lifting of the lift table is carried out by means of two hydraulic cylinders, powered from a compact electro-hydraulic unit, controlled from the cassette. The cassette is equipped with "lifting", "lowering" and "EMERGENCY STOP" buttons. Load capacity max kg 1500 Dimensions of the table standard mm 900x2000 Height in folded state (standard) mm ~230 Working stroke (max) mm 1100 Lifting time s approx. 30 Pressure in the hydraulic system MPa max 16 Noise level dBA approx. 72 Gkjdpst Ubn Nefx Ap Dec Installed power kW 1.1 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Weight of the device kg ~450

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) Gedpeu Nvp Sofx Ap Djkc soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads Gedjyr Uguspfx Ap Dekc • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2003, pressing force: 100 t, distance between side stands: 3,100 mm, Aciplex PHP-103-CN2 Hydraulic Press Brake 3240x100t Gjdpjwlhpdefx Ap Dokc Brand: Aciplex Model: PHP-103/CN2 Serial No.: 15910303 Year: 2003 Bending Length: 3240mm Span Between Uprights: 3100mm Force: 100t Motor Power: 15 HP Metalmaq Control: CNT 402.1

Condition: used, Applicable material: Concrete POLYGONMACH PMC150 150m3 mobile concrete batching plant is a mobile concrete batching plant used to produce large quantities of concrete in large construction projects. These power plants are portable and rebuildable, can work with a wide range of materials and can be used for many construction projects due to their mobility. The following steps are recommended to use the POLYGONMACH 150m3 mobile concrete batching plant effectively: 1. Correct positioning: The switchboard should be installed at the easiest access point possible. It must be securely located and engineers must ensure primary resources are in place. 2. Personnel: Plant operators must be experienced and trained to ensure the best results in construction projects. Employees should be trained regularly and use appropriate protective equipment to work inside the plant. Gsdpfx Aex D A Icep Dokc 3. Maintenance: Regular maintenance ensures longer life and efficient operation of the plant. This can reduce disruptions and prevent irregularities in mobile switchboard operations. 4. Production: In addition to their productivity, 150m3 mobile concrete batching plants have technologies that enable the production of high quality concrete. Therefore, it is important to use the right concrete mix to ensure efficient production every time. 5. Storage: The produced concrete should be stored correctly and well protected until the time of use. Ideal storage conditions will ensure safe handling and trouble-free use of concrete. Mobility: mobile Capacity: 150 m³/h

Condition: used, Year of construction: 2020, total length: 1,550 mm, lifting height: 200 mm, load capacity: 2,500 kg, Warehouse technology Still Handhubwagen HPS25 Drive No Drive Year built 2020 Lifting height (mm) 200 Gedpjxd Hxrsfx Ap Dokc Lifting weight (kg) 2,500

Condition: used, - 3-layer blown film line on rotary platform - Product-specific modifications and adjustments are possible (subject to charge) Gsdpfxexq Hcde Ap Djkc - Spare screw, spare cylinder and various spare parts are additionally available for this line Freight terms: ex location Delivery time: by arrangement Payment terms: 100% in advance before machine takeover, strictly net

Year of construction: 2005, condition: ready for operation (used), Pressing force: 6-8 bar Air consumption: 8 l/stroke Ram stroke height: 12 mm; 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Pneumatic press Schüco for Schüco punching tools Article no. Schüco: 290 124 Manual included Various crimping tools included! Tool numbers: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and fast clamping of the crimping tools The data for this listing was created using ModulMWS — software from LogoTech oHG. Manufacturer: SCHÜCO Model: Pneumatikpresse Machine type: Pressure: 6-8 bar Air consumption: 8 l/stroke Ram stroke: 12 mm : 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Pneumatic Schüco press for Schüco punching tools Schüco article no.: 290 124 Manual included Gksdpoyzkifofx Ap Doc Various crimping tools included! Tool no.: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and rapid clamping of crimping tools Data for this offer was created with ModulMWS – software by LogoTech oHG.

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Gkedpoz N Npvjfx Ap Doc Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter Gkedpjz N Nqaefx Ap Dec 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, machine/vehicle number: W4X133X02132, Year of construction: 2020, operating hours: 3,929 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gkedpfx Apez Iwu Ns Doc Load capacity: 1,200 kg Lifting height: 1,574 mm Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 800 x 1,315 mm Self-weight: 1,500 kg Battery year of manufacture: Battery voltage: 24 V Battery capacity: 500 Ah Battery type: 4 PzS Rest voltage: 24.9 V Service contract valid until: 03/2027 Operating hours: 3,929 h EQUIPMENT Formerly a Linde full-service unit Initial lift for double-stack operation Increased ground clearance for uneven floors All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 371

Condition: like new (used), Year of construction: 2025, operating hours: 1,500 h, functionality: fully functional, pressure: 12 bar, total height: 2,896 mm, total length: 12,192 mm, total width: 2,438 mm, empty load weight: 14,000 kg, Mobile containerized steam boiler plant 2,000 kg/h • Configuration: Mobile containerized steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. Gkjdpfxsz Ix Svs Ap Djc • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: Steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. • Gas train: DUNGS R2″, including gas filter, pressure regulator, operating and safety valves, and valve tightness monitoring. • Controls and automation: Valiantec, equipment for 72-hour operation without continuous operator attendance, modulating water-level control, Gestra TDS/BAE automatic TDS blowdown, and Crotti pneumatic bottom blowdown. • Feedwater pumps: 2 × Grundfos CR3-27. • Feedwater tank / atmospheric deaerator: DGSA 1500 FS, capacity 1,500 liters, AISI304 stainless steel, with steam heating and temperature control; specified water temperature 85–95°C. • Water treatment: A water softening system is not included in the scope of supply but can be supplied and installed at the buyer’s request, subject to separate agreement. • Blowdown cooling system: 250-liter AISI304 blowdown vessel with automatic cooling control. • Pipework and fittings: thermally insulated pipework, isolation and non-return valves, and steam traps. • Flue: insulated DN450 stainless-steel flue system. • Safety equipment: water-level and pressure safety devices, two safety valves, LPG and smoke detection, alarms, emergency shutdown, automatic gas shut-off, and ventilation. • Container footprint: 12,192 × 2,438 mm – length × width. • Connections: DN80 steam outlet, DN65 gas inlet, 1″ water inlet, DN80 blowdown vessel drain.

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Heinz Soyer, stud welding machine with stud welding gun -Type: BMS-8H -Connection voltage: 230 V / 50/60 Hz Godpfjz Ilrvjx Ap Dskc -Stud welding gun: PS-3K -Welding area: Bolts and pins from M3 – M8 or Ø 2 – 8 mm -Quantity: 1x stud welding machine available -Dimensions: 350/350/H270 mm -Weight: 15.4 kg

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Gedpfxjz En Afs Ap Dskc Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: new, Year of construction: 2026, Mantle and bowl liner set for Metso HP200 STD This listing is for a complete set of wear cones for the Metso HP200 STD cone crusher. The set consists of: Bowl liner (outer cone) — part number N55208134-22, weight 550 kg. Mantle (inner cone) — part number N55308011-22, weight 482 kg. Material composition: 22% manganese, 2% chromium, balance iron. The components are manufactured from castings of the highest quality available on the market. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Gksdpfxsz Dulwj Ap Dsc Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: used, functionality: fully functional, load capacity: 1,000 kg, lifting height: 820 mm, fork length: 1,150 mm, empty load weight: 125 kg, total length: 1,700 mm, drive type: Handbetrieb, construction width: 545 mm, Hand Pallet Truck Fork width: 160 mm Fork thickness: 50 mm Gsdpfjz Ewg Tox Ap Djkc Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are always available to us at favorable terms. We are also happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this HPT10XE. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment.

Condition: used, Duct Fan Coral PAP HP20 Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 Gedpsz Hw A Dsfx Ap Dskc HP 20 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Gsdpfxjz Hw D Us Ap Djkc