Used Mark Msm7.5D Tm500 for sale (5,072)

Condition: excellent (used), I am selling a fully functional, tested set of two Rexroth hydraulic pumps. The pumps are connected as a single unit and equipped with control elements and Rexroth valves. The unit shows signs of use, which can be seen in the photos. The sale includes the complete unit shown in the photographs. Lodjz Spflspfx Alyjah The following markings were read from the nameplates: Component Designation / Number Rexroth pumps SY2DFE1-11/071-071/... +00908620 Pump material number 00908632 Part number on the nameplates 21559404 01 Serial number of the first pump 1714777 Serial number of the second pump 1766280 Year of manufacture on the pump nameplates A038 Rexroth valves STW V Valve material number 00905187 Additional number on the valves 21539727 01 Designation on the valves A035

Condition: ready for operation (used), functionality: fully functional, operating hours: 12,341 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load Capacity Load capacity: 2,500 kg Mast Mast type: Triplex mast with full free lift Lifting height: 6,430 mm Free lift: available Drive and Battery Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: 04/2019 Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 95.3 V Laodpez R D A Tofx Alyjh Hydraulics Hydraulic valves: 3rd and 4th valve Fork positioner: Multi-directional fork positioner Side shifter: available MACHINE DETAILS General Manufacturer: Linde Type: E25 Year of manufacture: 2019 Operating hours: 12,341 h Own weight: 5,300 kg Dimensions Overall length: 3,650 mm Overall width: 1,150 mm Overall height: 2,824 mm Inspections and Service Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 EQUIPMENT Full cabin without driver's door Heater Windshield wiper Tilt angle display White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Orange warning light Safety light (front) Safety light (rear) Rear view camera Comfort seat All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 254

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Lsdpolc Ewiofx Alyjah Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Laodsy Emf Rjpfx Alysh Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: new, CATALOGUE NUMBER: MR001 - New machine, DTR documentation + CE marking TECHNICAL DATA - Effective width: 2000mm - Front width: 2500mm - Depth: 600/850mm - Height: 1700/1950mm - Max. capacity: 9000m3/h - Fan power: 1.1kW - Speed: 2780 rpm - Electrical parameters: 400V-50Hz - Diameter of the outlet pipe – square: 500x500mm - Cardboard pre-filter - “Paint-stop” filters - Dimensions (L/W/H): 2500x850x2200mm - Weight approx.: 250kg The stated price applies to the standard version. Dry walls are used to extract mist from painting or coating processes. Extraction and purification of contaminated air is carried out by a dual filtration system consisting of: cardboard filters at the front of the machine and a “Paint-stop” filter. The wall is constructed from modular panels made of galvanized sheet metal. Equipment: – Painting wall with a two-stage filtration system (Paint Stop filter and Andrea filter) – Extension for the painting wall, increasing the width from 2000mm to 2500mm and the height from 1700mm to 1950mm – Multi-plane adjustable damper – Atex fan 9,000 m3/h – Soundproofed fan housing – Internal silencer, shape 380×700 L – 600 mm – Roof/wall exhaust outlet – side – Gasket for connecting exhaust ducts – Screw for connecting extensions and ventilation ducts Optional: – Fan power regulator – Mechanical filter – replacement of the cardboard filter with a steel mechanical filter – Third stage of filtration – adding a third stage of filtration using a synthetic fiber filter, to further purify the filtered air. – Ceiling with lighting – Internal silencer, shape 500 x 500 mm L – 600 mm – Wall extension (increasing the working area) – Recessed enclosure (increasing the working area) – Supply air system – Ventilation ducts – Connection fitting 600×600 – 135-degree elbow exhaust outlet (directs air downwards at a 45-degree angle) – Vertical exhaust outlet 500×500 with a reduction from 600×600 (discharges air vertically upwards, so that it rises several meters above the outlet and spreads evenly) Also available: Painting wall PRO 2000/1700/600 with 10,000 m3/h / 300 Pa explosion-proof radial fan – 1.5kW motor Lasdpfxsx Uz Rmj Alyoh – 14,600 PLN / net, with the option to choose the fan arrangement on the right/left or rear side of the wall. Net price: 11,600 PLN Net price: 2,700 EUR depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2014, laser power: 20 W, Laser marking machine manufactured in 2014. This Trotec Speedmarker 300 features a nominal power of 60W and includes a rotary attachment for enhanced versatility. The workstation is designed with an enclosed Class 2 safety housing, ensuring operator safety while providing visibility. If you are looking to get high-quality laser marking capabilities, consider the Trotec Speedmarker 300 machine we have for sale. Contact us for further details. • Input power: 100–250 VAC, 50/60 Hz • Nominal power: 60 W • Standards: EN 60825-1 (2007) • Controls: External rack-mounted control unit with emergency stop, key switch, and status indicators • Workstation: Enclosed Class 2 safety housing with viewing window and manual lift door Lajdpfx Aljy Htbuoyoh Additional equipment • Rotary attachment (Model IUX 65/3-M2) • 3-jaw rotary chuck with additional jaw sets • Rotary max speed: 3000/min (Nmax)

Condition: good (used), Year of construction: 2008, operating hours: 2,395 h, fuel type: diesel, HITACHI HX99B-2 tracked boom lift, telescopic, NONMARKING, 2008, KUBOTA DIESEL, 11m working height. A video can be sent via WhatsApp. Lajdpszq D Rlefx Alysh We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without any obligation. Please call beforehand, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2026, condition: new, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Laedpfx Ajym N Ipslyjh

Year of construction: 2016, condition: used, Ask for additional information! Ledpfx Aoxy Sphelyoah

Condition: used, This listing is for a Qiagen PyroMark Q24 Advanced Sequencer For advanced methylation and mutation quantification in long sequence runs using Pyrosequencing Advanced technology, software, and chemistry for long sequence runs Quantitative methylation analysis at consecutive CpG or CpN sites Improved quantification of sequence variations at any sequence position Easy and improved base calling functionality Assay versatility on the same instrument and in the same run PyroMark Q24 Advanced has improved Pyrosequencing technology to provide even better real-time sequence-based detection and quantification than before. PyroMark Q24 Advanced features advanced technology, software, and chemistry, and is highly suited for analyzing any kind of sequence variation, particularly DNA methylation at CpG or CpN sites, complex mutations, or for de novo sequencing applications such as microbial typing. Can be refurbished on request, refurbishment not included in price. Lodpexzh Suofx Alyjah

Year of construction: 2026, condition: new, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Ljdpjw Npv Esfx Alyjah

Condition: new, V13.5mm for 1-2.5mm bending Lsdpfsldc U Rsx Alyeah V38mm for 3-6mm bending

Condition: used, machine/vehicle number: c24_68002, - Emergency power group - New unused - 1x 140 KVA 1x 110 KVA Laodpfxermibpj Alyeh

Year of construction: 2026, condition: new, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Lasdpfsfir Srox Alyoh

Year of construction: 2025, condition: new, functionality: fully functional, The powerful fiber laser markers in the Y-Series are ideally suited for industrial part marking. They are used in almost all metal and plastic processing industries for precise and efficient direct marking of parts and products: from automotive construction through medical and security technology to electronics. All kinds of codes (QR codes, DMC / DataMatrix Codes, Barcodes), alphanumeric characters, logos and letterings are marked reliably and highly accurate with fiber lasers. The vision system which can be optionally integrated in the marking unit, features markings in zero-defect quality and process reliability through automatic optical verification and validation steps. The Marking Field Calibration as well as parameter sets for optimizing marking speed, quality and accuracy allow optimum adaptation to the respective application. Lsdpfx Aljfir S Nsyoah

Condition: new, Year of construction: 2026, functionality: fully functional, Our Amada-style press brake upper punches are engineered for high-precision sheet metal bending, fully compatible with Amada AFH press brake systems and quick-change holders. Manufactured from premium alloy tool steel, all punches go through CNC rough machining, vacuum heat treatment and multi-stage precision grinding to achieve consistent hardness, stable bending angles and outstanding wear resistance. We supply a comprehensive range of segmented punch profiles, including standard 90° punches, acute-angle punches, gooseneck punches, high punches for deep box forming and special forming punches. The modular segmented design allows flexible combination for multi-step bending operations, greatly shortening tool setup time and improving production flexibility. Strict tolerance control guarantees excellent interchangeability, so segments can be freely mixed and matched without alignment deviation. These upper punches deliver reliable performance when bending mild steel, stainless steel, aluminum and galvanized sheets. They minimize workpiece scratches and angle errors to reduce scrap rates. Besides standard tooling, we also offer custom punch profiles according to customer drawings or samples, serving metal fabricators producing electrical cabinets, enclosures, machinery frames and architectural metal components. - Amada style press brake upper punches, fully compatible with Amada press brakes and quick-change tool holders Laedpfx Aljz Hyl Ijysh - Premium alloy tool steel with vacuum heat treatment and precision grinding for long service life - Full product portfolio: standard right-angle, acute angle, gooseneck, high deep-bending and custom special punches - Segmented modular design for flexible combination, fast tool change and shorter setup time - Tight machining tolerance, excellent interchangeability between punch segments - Stable forming performance for mild steel, stainless steel, aluminium and galvanized sheet - Reduce bending marks and angle deviations, lower your scrap rate - Custom punch profiles available based on drawings or samples - Ideal for electrical enclosures, machinery frames and architectural sheet metal fabrication

Condition: used, machine/vehicle number: H2X388V00629, Year of construction: 2019, operating hours: 18,779 h, load capacity: 4,500 kg, lifting height: 3,700 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,700 mm Fork length: 2,400 mm MACHINE DETAILS Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,800 mm Dead weight: 8,000 kg Battery: 80 V, 775 Ah Battery voltage in idle state: 83.1 V Service valid until: UVV valid until: 07/2027 Operating hours: 18,779 h EQUIPMENT Fork positioner with side shift Integrated scale Facelift model with tilt angle indicator Windshield with windshield wiper Roof panel Lateral fall protection White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support and seat heating Hydraulic valves: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Lsdpfx Alez Nn Tysyoah Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 74

Condition: used, overall weight: 18,000 kg, first registration: 09/2019, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, - Side loading, interior height 2700 mm Lajdpfx Alszy Eayoyjh - Pass-through system - Unladen weight 4600 kg

Condition: like new (used), Year of construction: 2022, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 20220807 01320A, type of input current: AC, total length: 6,000 mm, total height: 1,850 mm, total width: 1,100 mm, input voltage: 2,20,380 V, overall weight: 550 kg, input current: 1,215 A, Equipment: clamp, High-Speed Automatic Horizontal Flow Wrapper (Pillow Pack Machine) – Ultra-Low Usage Heavy-duty automatic horizontal flow packaging machine manufactured by Qingdao Bostar Packing Machinery Co., Ltd. Used for a very short period with under 450 total working hours. The machine is in excellent, like-new operational condition. Laedpjz Ihbaefx Alysh Key Technical Specifications & Features: • Condition: Used – Like New (< 450 operating hours) • Gas Flush Option: Equipped with gas flushing capabilities (e.g., Nitrogen injection) for Modified Atmosphere Packaging (MAP) to extend product shelf life. • Construction: Stainless steel frame, machine housing, contact parts, and long product infeed conveyor • Automation & Controls: Integrated Panasonic FP-XH C40T PLC automation unit • Motion Drive: 3-Axis Panasonic Servo Motor System for precise, independent control of infeed, film feeding, and sealing jaw cross-cuts • Infeed & Film Handling: Extended stainless steel belt conveyor with pushers, dual film roll holders, photoelectric eye-mark registration sensor for precise print alignment, and adjustable bag-forming box • Sealing & Cutting: Rotary horizontal sealing jaws with integrated heating elements, rotary brush discharge belt, and pneumatic pressure regulation • HMI Interface: Touchscreen control panel mounted on a swivel arm for easy recipe settings and diagnostics Ideal Applications: Pillow-pack packaging of bakery items (biscuits, wafers, croissants, cakes), confectionery, energy bars, snacks, trays, and various non-food/industrial products. Location: Amman, Jordan Terms: EXW

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 1600mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 2,600 mm, overall weight: 8 kg, input voltage: 380 V, table length: 4,300 mm, table width: 1,600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,600 mm, workpiece length (max.): 2,000 mm, table height: 1,000 mm, space requirement width: 300 mm, input current: 70 A, Core Advantages ✅ 1600mm ultra-wide processing width for large-size workpiece batch production ✅ 3-in-1 multifunction: deburring, chamfering and wire drawing, one machine for multiple uses ✅ Full-automatic one-pass processing, high efficiency and stable precision ✅ Wide adaptability for various metal materials and industrial scenarios ✅ Adjustable parameters to support customized finishing effects ✅ Heavy-duty structure, low failure rate and excellent cost performance Core Performance & Functional Features 1. 1600mm Ultra-Wide Working Width for High-Volume Production Featuring a full 1600mm effective processing width, this machine supports one-time integral finishing for large metal sheets and wide workpieces that traditional narrow-width machines cannot handle. It accommodates full-width continuous feeding as well as batch processing of small and medium-sized parts, delivering excellent production flexibility and strong compatibility. The optimized conveyor system ensures stable, synchronous workpiece transmission across the entire width, avoiding position deviation, incomplete finishing and inconsistent precision. It minimizes repeated clamping and positioning procedures, shortens production cycles, and is perfectly suited for mass processing of large-format sheet metal components. 2. Full-Automatic Precision Deburring (Zero Burr Residue) Equipped with high-density flexible abrasive brush groups and multi-directional grinding assemblies, the machine provides dead-angle-free all-round deburring for upper surfaces, lower surfaces and cutting edges. It thoroughly removes hard burrs, flash, cutting slag and oxidation layers produced in metal cutting and stamping processes. Adopting intelligent adjustable speed and constant-pressure control, the system adapts to different metal materials and varying burr thicknesses for targeted finishing. It removes sharp edges completely without damaging workpiece base materials or original dimensional tolerance, delivering smooth, clean surfaces that meet strict industrial assembly and precision manufacturing standards. 3. Adjustable Precision Chamfering for Standardized Edge Finishing Lodpfx Alez Ii H Doysah The equipment supports customizable edge chamfering and rounding treatment with freely adjustable angle and size. It achieves uniform, smooth chamfering on straight, curved and irregular workpiece edges, solving the inconsistency, low efficiency and poor precision of manual chamfering. The high-precision fixed-angle machining structure ensures identical chamfer accuracy for every workpiece. Optimized edge finishing removes sharp edges effectively, improving workpiece safety, assembly fit and surface quality. It is widely applicable for mechanical parts, hardware components, electrical enclosures, automotive sheet metal and general metal fabrication products. 4. Uniform Wire Drawing Finishing for Premium Metal Texture Built with a professional wire drawing module, the machine produces delicate, consistent and aesthetic linear textures on stainless steel, carbon steel, aluminum alloy, copper and other metal surfaces. It effectively removes tool marks, grinding scratches, oxidation traces and uneven surface flaws. Wire drawing depth and surface roughness are precisely adjustable to achieve fine straight wire drawing, matte wire drawing and customized surface effects.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Trotec SpeedMarker 156Wx Industrial Laser Marking System Brand: Trotec Model: SpeedMarker 156Wx Type: Industrial Laser Marking System Application: Permanent marking, engraving and identification of industrial components Available for sale is a Trotec SpeedMarker 156Wx, a professional industrial laser marking system from Trotec Laser. The SpeedMarker series is designed for high-quality, permanent marking and identification of a wide range of industrial components and products. It is suitable for applications including product identification, serial numbers, barcodes, QR codes, logos, text, part numbers and traceability markings. The SpeedMarker 156Wx is particularly suited to industrial and manufacturing environments where accurate, repeatable and permanent marking is required. Typical Applications: - Industrial component marking Lodpfx Ajz Hzvholysah - Serial number and part number marking - Barcode and QR code marking - Logo and branding - Product identification - Traceability marking - Metal component marking - Engineering and manufacturing applications - Tool and equipment identification - Permanent asset marking Device was removed from IMA manufacturing line that was never commissioned. Marking system is in "as new" condition. Sold as seen in images.

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The engine was overhauled in 2024! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Windshield wiper LED work light (front) LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Lodpfx Aez Nvqmslyoah Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: used, machine/vehicle number: H2X386V04688, Year of construction: 2019, operating hours: 21,389 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,050 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Battery: 48 V, 625 Ah, 5 PzS Battery year of manufacture: 23.06.2023 Battery voltage at rest: 51.1 V Laedpfsz Nwknox Alyeh Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 21,389 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support and seat heating Facelift model with tilt angle indicator Hydraulics: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 164

Condition: used, machine/vehicle number: H2X386V04486, Year of construction: 2019, operating hours: 22,973 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment: 350–1,050 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery year of manufacture: 2023 Battery voltage in idle state: 50.3 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Lodpfoz Nwpwjx Alyeah Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 Operating hours: 22,973 h EQUIPMENT Former Linde full-service unit Facelift model with tilt angle indicator Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 165

Condition: used, machine/vehicle number: H2X388V00602, Year of construction: 2019, operating hours: 15,156 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,700 mm Load capacity: 4,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,560 mm Own weight: 8,000 kg Battery date: 02/11/2022 Battery voltage: 80 V Battery capacity: 775 Ah Resting voltage: 81.1 V Lajdpfx Aljz S Nnwsyeh Service valid until: 08/2027 UVV (Occupational Safety) certificate valid until: 08/2027 Operating hours: 15,156 h EQUIPMENT Formerly a Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork positioner with side shifter Integrated scale Display of the tilting angle Windshield with windshield wiper Roof window Lateral fall protection White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Safety Light (front) Safety Light (rear) Comfort seat with lumbar support and seat heating All dimensions are rounded values. No warranty is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 43