Used Maxion , Pillar Drill, - Semi-Automatic for sale (33,162)

Condition: used, Year of construction: 1995, machine/vehicle number: 953003, Order No. 25072 Technical Specifications: - Drilling capacity in steel ST 60: 40 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 150 mm - Drill spindle speed: infinitely variable rpm - Throat depth: 350 mm - Max. distance between drill spindle and table: 580 mm - Table with 2 T-slots: 600 x 450 mm - Height adjustable via gear rack and hand crank - Table tiltable left and right - Drive: 400 V / 3 kW - Space required: approx. W 700 x H 1950 x D 950 mm - Weight: approx. 650 kg - With: - Machine vise Bljdpfx Abjv Uy Npetjl - Keyless drill chuck: 1-13 mm - Lighting

Condition: used, Year of construction: 1970, Technical details: bore stroke: 170 mm Bjdpszgcx Hjfx Abtell total power requirement: 3,5 kW dimensions of the machine ca.: 0,75 x 1,10 m

Condition: ready for operation (used), Year of construction: 2017, Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available. Bsdow Rqv Ajpfx Abtsll

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Blsdpspu R Nvefx Abtsl Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: ready for operation (used), Year of construction: 1979, machine/vehicle number: 20945, Drill diameter: 28/35 mm Spindle mount: MK 3 Overhang: 293 mm Table size: 400 x 400 mm Table can be swiveled on a round column and its height can be adjusted using a hand crank and rack and pinion mechanism. Large distance between table and drill chuck: 630 mm Chuck travel: 180 mm Blodpfozh H I Ujx Abtsl Spindle speeds, infinitely adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space required: 600 x 920 x 1880 mm

Condition: good (used), functionality: fully functional, Drilling capacity in ST 60: 50 mm 8 gear stages: 67 – 750 rpm Spindle motor: 2.5 / 3.3 kW 4 drilling feed rates: 0.1 / 0.2 / 0.3 / 0.40 mm/rev Blsdszrzl Aspfx Abtjl Overhang, approx.: 355 mm Table surface: 500 x 620 mm (measured without edge) Spindle stroke: 250 mm Taper: MK 5

Condition: used, Year of construction: 1980, machine/vehicle number: 18798, Item No. 25046 High-performance pillar drill Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm - Drill spindle mount: MK 3 long spindle - Drill spindle stroke: 180 mm - Continuously variable drill spindle speeds - Adjustable – Stage 1: 65 – 240 rpm - 130 – 480 rpm - Stage 2: 240 – 875 rpm - 480 – 1750 rpm - Overhang: 290 mm - Max. distance table – drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Table with reversible function and permanently mounted machine vise - Table height adjustment via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement: approx. W 660 x H 1900 x D 700 mm - Weight: approx. 300 kg Bjdpezxdhasfx Abtell - Includes: - Quick-change drill chuck 1-13 mm

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Technical data at a glance Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Column diameter | 90 mm Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Bljdpfxozdy Rze Abtjl Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: used, Year of construction: 2017, bore capacity in steel (diameter) 40 mm Bjdpfx Aozpzdaebtjll throat 285 mm bore stroke 160 mm Spindle Speed 150-2.000 U/min. spindle taper MK4 column diameter 115 mm total power requirement 1,5/2,2 kW weight of the machine ca. 275 kg dimensions of the machine ca. 1000x700x1900 mm

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev Bedpfjy En I Hjx Abtjll - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm Bodpfxozl E T Rs Abtell bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: good (used), Storage location: 3110 Manufacturer: MAXION Year of manufacture: 2006 Machine number: 186477 Type / Model: BT18STP Drilling capacity: 30 mm Threading capacity: M25 Spindle mount: MK 2 Bljdpfx Aozcuypobtol Speed range: 120 to 2,160 rpm, continuously variable Overhang: 230 mm Vertical adjustment: 300 mm Table: 600 x 600 mm Clamping area: 300 x 330 mm Stroke: 120 mm Distance table - spindle nose: 40 to 310 mm Vertical adjustment: 270 mm Total power consumption: 1.3 kW Accessories / Equipment: Belt adjustment Condition: good Footprint: 800 x 800 mm Weight: 160 kg Dimensions with table: 600 x 600 x 1,200 mm

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Blsdpfx Aju Idkzebtel Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 176, functionality: fully functional, see photos – the machine is stored in a warehouse and is available for sale. Bledezxc A Aepfx Abtjl

Condition: good (used), functionality: fully functional, Data : Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm . Bjdpfx Ajzl Exmobtjll

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer Bljdpfew H Naaox Abtel IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: good (used), functionality: fully functional, total width: 940 mm, total height: 1,850 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, This Bimak Mod. 35 MT/C is a well-maintained column drilling machine equipped with a cross table and features a Mitutoyo digital readout on two axes. The machine supports both clockwise and counterclockwise rotation, which can be easily switched using a foot pedal for efficient operation. The Laip quick-change system includes ten tool holders, consisting of two drill chucks and seven collet holders, providing flexibility for various drilling and tapping tasks. An additional collet holder is required for milling operations with this machine. This holder is not included but can still be ordered as new. Manufacturer: Bimak Model: Mod. 35 mt/c Condition: Used Mains voltage: 400V Drive: V-belt Spindle taper: MC4 Spindle stroke: 150 mm Automatic spindle feed: No Speed ranges: 14 (45 - 1650 rpm) Digital readout: Mitutoyo Coolant pump: Yes Bodpfsxt Ivkox Abtjll Reversible (CW/CCW): Yes Cross table dimensions: 600 x 240 mm Machine dimensions: 940 x 1100 x 1850 mm (Width x Depth x Height) Motor: 0.8 / 1.5 kW See website for a video of the machine in operation.

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance Blodpefiliwofx Abtjl • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA158 Semi-Automatic Strapping Machine The CORMAK BA158 is a semi-automatic strapping machine designed for fast and repeatable securing of cartons, parcels, boxes, bundles, and multipacks using polypropylene (PP) strap. The device reduces the number of manual operations and improves the efficiency of preparing goods for shipment or storage. After the operator manually wraps the strap around the product, the machine automatically performs the remaining stages of the strapping cycle. The built-in tensioning mechanism tightens the strap, while the sealing unit performs thermal welding and cuts off the excess material. The process does not require additional metal or plastic seals. Benefits of Using the BA158 Strapping Machine Faster preparation of cartons, parcels, and bundled packages for transportation. Reduced manual workload thanks to automatic strap tensioning, welding, and cutting. No need for additional metal or plastic buckles. Consistent and uniform securing of packages. Adjustable strap tension according to the type of product being secured. Convenient strapping of products with different dimensions. Space-saving design thanks to its compact construction. Easy connection to a standard 230 V power supply. Applications The CORMAK BA158 semi-automatic PP strapping machine is suitable for securing: Shipping cartons. Courier parcels. Boxes and multipack packaging. Printed materials, catalogues, and paper products. Parts and components. Wooden and woodworking elements. Products sold through e-commerce platforms. Goods prepared for transportation or storage. The machine can be used in warehouses, production facilities, wholesalers, e-commerce companies, and packaging and dispatch departments. Electric strapping machines of this type improve repetitive packaging operations related to preparing products for transport and storage. Semi-Automatic Strapping Cycle After manually wrapping the strap around the product, the operator inserts the strap end into the machine mechanism. The device automatically performs: Strap tensioning. Thermal strap welding. Excess strap cutting. Blsdszq Adqjpfx Abtel The maximum strap tension force is 400 N. The repeatable operating cycle helps maintain consistent packaging quality for consecutive products. Open Working Area Design The open construction without a closed frame makes it easier to place products of different shapes and sizes on the working surface. This solution is ideal for strapping various types of packages and bundles. The open design also makes it easier to rotate and reposition products when several straps need to be applied in different locations. PP Strap Compatibility – 5–15.5 mm Width The strapping machine supports polypropylene (PP) strap with widths from 5 to 15.5 mm. This range allows the user to select the appropriate strap according to the packaging type and process requirements. The machine is compatible with strap rolls featuring: Inner diameter: 200 mm Outer diameter: up to 450 mm Roll width: 200 mm Technical Specifications Parameter Value Model CORMAK BA158 Machine Type Semi-automatic strapping machine Strap Type PP Strap Width 5–15.5 mm Maximum Strap Tension 400 N Strap Joining Method Thermal welding Inner Roll Diameter 200 mm Outer Roll Diameter Up to 450 mm Roll Width 200 mm Working Table Height 765 mm Power Supply 230 V Motor Power 0.3 kW Dimensions 855 × 540 × 765 mm Machine Weight 50 kg

Condition: ready for operation (used), Year of construction: 1995, Drill diameter in steel/cast iron: 20 mm, 40/55 mm Spindle mount: MK 4 Overhang: 345 mm Bsdpjzh H D Nefx Abtoll Table size: 450 x 600 mm Maximum distance between table and drill spindle: 785 mm Spindle stroke: 180 mm Spindle speeds in 4 groups via pole-change motor and gearbox, as well as continuously variable: 160 - 1540 rpm 4 automatic feeds: 0.09; 0.12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6153102135, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Blsdpfx Ajvyl Dvjbtel Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 15.428 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Bodpfxomig Tde Abtjll Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) / mm throat / mm bore stroke / mm Blsdpfx Abov H Er Hotol total power requirement / kW

Condition: excellent (used), Year of construction: 1988, Drill diameter: 28/35 mm Spindle mount: MK 3 Overhang: 293 mm Table size: 300 x 440 x 500 mm Table can be swiveled and its height adjusted via hand crank and rack and pinion on a round column. Large distance between table and drill chuck: 630 mm Bjdpfx Aszhu Aysbtell Chuck stroke: 180 mm Spindle speeds adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.3 kW Weight: 340 kg Space requirement: 1100 x 900 x 1880 mm

Condition: used, Bench drilling machine, Table Drill Press GILLARDON Type GT 16 Serial No. Year of manufacture approx. 1985 Drilling capacity 16 mm Spindle taper MK 2 Spindle speed 300 to 3000 rpm Throat depth 250 mm Quill stroke 140 mm Table size 400 x 400 mm Table height 850 mm Bedey N Duwspfx Abtsll Distance spindle – table plate max. 680 mm Column diameter 105 mm Motor power 0.75 kW Power supply 380 Volt, 50 Hz - Spindle speed via variator belt drive and 2 V-belt stages - Drill head height adjustment via hand crank approx. 430 mm - Lighting unit - Cabinet base with door - Quick-action drill chuck 1 to 16 mm Space requirement L x W x H 900 x 550 x 1650/2080 mm Weight 250 kg Very good condition