Used Moditec / Digicolor Slow-Running Tooth Roller Mill for sale (23,613)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 77,374 h, functionality: fully functional, machine/vehicle number: 419-01, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, controller model: Siemens 840D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2021 (spindle operating hours approx. 7,300 h)! Isdpfxozlnm Hj Aaheti The machine underwent a major overhaul in 2013! The machine has been continuously serviced and repaired annually by the manufacturer and kept up to date with the latest technology (preventive maintenance). The last service was performed in January 2024. TECHNICAL DETAILS 4 axes Travel range X-axis: 6,000 mm Travel range Y-axis: 630 mm Travel range Z-axis: 550 mm Swivel range B-axis: ± 100° Spindle speed: 12,000 rpm Spindle torque: 140 Nm Rapid traverse rate in X/Y/Z: 60 m/min Chip-to-chip time vertical: 3.0 sec. (3.3 sec. DIN) Chip-to-chip time horizontal: 4.7 sec. (5.0 sec. DIN) MACHINE DETAILS Control system: Siemens 840D Power type: 3/N/PE Mains frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 220/24 V Connected load: 52 kVA Rated current: 75 A Fuse rating: 80 A Weight: 19,500 kg Operating hours: 77,374 h EQUIPMENT 5-axis milling package (simultaneous milling on up to 5 axes) Chip conveyor, discharge height: 1,050 mm Coolant through spindle (CTS) preparation Vacuum rotating filter KNOLL VRF250 (steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HD pump and servo valve Coolant nozzle per swivel field Emulsion mist extraction, 2 extraction fans at 800 m³/h each Rotating viewing window on the left and right (1,400 mm from the center of the machine) Automatic loading doors Center partition for pendulum machining 92 tool positions HSK-A63 (rear magazine) Blow-off air Tool life monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (states: machine on, machine running, piece counter) Marposs (Brankamp) collision monitoring CMS100 3D machine model for kinematic simulation in the CAM programming system Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per swivel field, clamping pressure control Linear clamping system KOHN 8 hydraulic clamping cylinders KOHN Multi 2000 MFS 125/680 HD Two-part grating floor for the operator across the entire operating width of 6,000 mm

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Itjdeyf A H Nepfx Aahei Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: used, Max. turning diameter: 650 mm Isdpfx Aasvk T S Asheti Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, operating hours: 9,903 h, machine/vehicle number: 20156, USED SAKI TIRE ROLLERS MODEL : TZ600 SERIAL : 20156 YEAR : 1998 Itodpfx Aaezkq Siehei HOUR : 9903

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only one work area for bars up to 7.7 m long or two independent work areas with piece load/unload while machine is working. It has an 8 place tools storage on board the X axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section. Iedpfx Aszlat Sjahjti

Condition: new, Year of construction: 2026, 🔨 Maximize Your Recycling Power with Mizar Hammer Mill! ♻️ The Mizar Hammer Mill is a high-efficiency grinding solution engineered to meet the toughest demands of the recycling and processing industries. With its high-speed rotating hammers, it crushes, grinds, and pulverizes a wide range of materials—including plastics, wood, agricultural waste, and complex metals—into fine, manageable particles. 🔧 Why Mizar Hammer Mill? ✅ Robust & Innovative Design – Built for heavy-duty use with minimal maintenance ✅ Adjustable Output – Customizable particle size for different materials ✅ High Throughput – Ensures consistent, large-scale processing ✅ Energy Efficient – Engineered for lower operating costs and higher productivity Ijdewhap Uepfx Aahsti ♻️ Ideal for Recycling 🟢 Circuit Boards 🟢 Radiators 🟢 Multi-metal Materials Whether you're processing e-waste, metallic mixtures, or industrial by-products, the Mizar Hammer Mill offers unmatched performance, durability, and versatility. 🔩 Take control of your recycling process with a solution trusted by industry professionals.

Condition: new, Year of construction: 2026, The TRM Series Turbo Mills is an advanced grinding system used primarily in the recycling of electronic boards and cables for the effective crushing and grinding of these materials. Plastics, metals, and other components found in electronic boards and cables are reduced to fine particles and transformed into recyclable raw materials thanks to this machine. With its high-speed rotors, the Turbo Mill carries out the grinding process, reducing materials to micron sizes through friction and impact forces. ✅ Superior Grinding Performance – Friction & impact forces ensure ultra-fine particle sizes. ✅ High-Speed Rotors – Maximum efficiency in material reduction. ✅ Durable & High-Efficiency – Designed for continuous, long-term operation. ✅ Eco-Friendly & Sustainable – Ideal for electronic waste recycling. 🔸 Choose the Right Model for Your Needs! Technical Specifications 🔹 TRM S1 Power: 15 kW Rotor Diameter: 380 mm Length: 1420 mm Width: 700 mm Height: 700 mm Weight: 660 kg Ijdpfx Aaev Hm S Ishsti 🔹 TRM M1 Power: 30 kW Rotor Diameter: 500 mm Length: 1680 mm Width: 820 mm Height: 920 mm Weight: 870 kg 🔹 TRM L1 Power: 45 kW Rotor Diameter: 620 mm Length: 1790 mm Width: 940 mm Height: 1040 mm Weight: 1000 kg

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. The machine is available for inspection in Riga, Latvia. The machine is currently powered on and can be inspected by appointment. Iodpfozfgmxsx Aahoti Additional photos and technical information are available upon request.

Condition: used, Type BF 63 Spindle mount: 4MT Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Table size: 900 x 710 mm Itjdjwrpy Rspfx Aahei Drilling travel: 560 mm Table load capacity: 2000 kg Rotary table: 360 degrees

Condition: good (used), 2550 x 880 mm (6 pieces) Itjdpfx Aaexcufkohoi 2550 x 1090 mm (3 pieces) 1300 x 100 mm driven + 2 pieces without drive (2 pieces) 1300 x 200 mm driven + 1 piece without drive (1 piece) Roller diameter: 60 mm

Condition: used, Size of the roller conveyor: 3300 x 1100 mm speed: 36m/min roller diameter: 65 mm 2 strips: 1050x370mm speed: 10m/min Itedpfx Aajtwnd Djhji

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 700 mm, table length: 2,000 mm, Control: HEIDENHAIN TNC-426 Travel of the X-axis: 2000 mm Y-axis travel: 800 mm Itjdevfr Hbspfx Aahei Z-axis travel: 800 mm Taper tip: ISO 50 Speed range: 20 - 3000 rpm Spindle power: 17 kW

Condition: good (used), Table size: 1100 x 1300 mm Itedeh T T Aqspfx Aahji Travel range: 1300 x 1300 mm Spindle travel: 500 mm

Condition: repair required (used), feed length X-axis: 1,500 mm, feed length Y-axis: 600 mm, feed length Z-axis: 450 mm, Manufacturer: Reckermann Itjdpfsuhnznex Aahsi Tip: Beta 10 Movements: X: 1500 mm Y: 600 mm Z: 450 mm Control: Sinumerik 810M Y-axis does not move, it does not stand on a reference point!

Condition: good (used), Manufacturer: WMW VEB Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Itodpjik Hcuofx Aahji Table size: 200x630mm

Condition: ready for operation (used), Table size: 1300x1100mm X: 1300mm Y: 1300mm Itodpeh E Dnhjfx Aahsi Spindle travel: 500 mm UNDER POWER!!

Condition: refurbished (used), Year of construction: 1997, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,780 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 16,000 rpm, total width: 4,000 mm, total height: 5,000 mm, total length: 11,000 mm, table length: 6,000 mm, table width: 1,500 mm, spindle motor power: 7,500 W, Very Clean 5-Axis Machining Center Axis motors and the control unit were replaced in 2022 with a Fagor 5-axis module. X - 6500mm Y - 1780mm Z - 1400mm Iodpfx Aaozl H Trohjti A - 200 degrees C - 400 degrees Max. Speed: 20000mm/min RPM: 16000 HSK63A Taper

Condition: used, Industrial Twin-Column Band Saw with Roller Conveyor System, KALTENBACH KBS 920 DG, Used machine Manufacturer: KALTENBACH GmbH + Co. KG (Lörrach, Germany) – Market leader in premium steel processing machinery Type: KBS 920 DG Year of manufacture: 2002 (The machine's software has been updated, and compared to its age, it has been retrofitted with a newer PLC and conveyor control system) Condition: Used, in excellent technical condition, fully operational complete sawing line Overall dimensions: (According to the complete conveyor and machine layout) Technical and operating parameters: Cutting capacity at 90° (Width x Height): Max. 920 x 500 mm (ideal for large HEA, HEB, IPE beams) Cutting capacity at 60°: 820 x 500 mm Cutting capacity at 45°: 670 x 500 mm Mitre cutting range: Infinitely adjustable in both directions (NC-controlled angle setting) Saw band dimensions: 7290 x 41 x 1.3 mm Band speed: Infinitely variable (frequency-controlled) Saw frame feed: Hydraulically controlled, infinitely variable adjustment Material clamping: Horizontal and vertical hydraulic vice system ensuring vibration-free clamping during cutting Itedjzl Ugaepfx Aahsi Control system: Modernized, upgraded software program and PLC control system relative to its age Integrated Material Handling Roller Conveyor System: Infeed roller conveyor: 28 meters long, automatic feeding into the saw, with full longitudinal and transverse movement (equipped with lateral chain/roller cross-transfer units for loading raw materials) Outfeed roller conveyor: 19 meters long, automatic discharge of cut finished products, with full longitudinal and transverse movement for lateral buffering and sorting of finished parts

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Technical documentation Ijdpfx Aaszlw Rnoheti Year of manufacture: 2019

Condition: used, Year of construction: 2024, operating hours: 118 h, functionality: fully functional, turning length: 2,050 mm, turning diameter over cross slide: 600 mm, turning diameter: 550 mm, spindle motor power: 15 W, spindle speed (min.): 4,000 rpm, spindle bore: 116 mm, travel distance Z-axis: 2,050 mm, 2024 MODEL CNC LATHE HYUNDAI WIA 400 LMC Ijdpfxozlux Nj Aahjti C-AXIS (4 LIVE TOOLS) OPERATING HOURS: 118 HOURS BAR CAPACITY: 116 MM MACHINE IS CLEAN AND WELL-MAINTAINED. NOTE: THE MACHINE WILL BE AVAILABLE IN STOCK IN ISTANBUL ON JULY 20TH.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Clamping table area mm 250 x 1130 Working stroke: Isdpoy Enumofx Aaheti longitudinal mm 800 cross mm 350 vertical mm 450 Taper in spindle ISO 40 Range of revolutions r.p.m. 45 - 4500 Number of revolutions steps 16 Main motor output kW 2,2/3,0 Total machine input kVA 4,0 Machine dimensions mm 2650 x 1980 x 2260 Machine weight kg 1760

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Wheel diameter max 2000 mm 700 mm wheel width Iodpfeza Egbjx Aahsti Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Itjdpfx Aaszmt U Eohei

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm Itjdpfx Aasynmtxehsi 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), GT SERIES KNIFE MILLS MACHINES HOUSED IN SOUND-ABSORBING ENCLOSURES, COMPLETE WITH BIG-BAG STATION OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE CURRENTLY AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM Itjdpfxeudyghe Aahji MAIN MOTOR 15KW ROTOR EQUIPPED WITH V-SHAPED KNIVES