Used Felder Bf 6 26 for sale (148)

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. Kdedozn I Aaspfx Af Hst 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Kdsdpjyzdnbofx Af Hot Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock Kdedpfx Ajxlt Shof Hot ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: as good as new (ex-display), Code: N0340 Brand: HAMMER - FELDER - AUSTRIA Model: A 2 - 26 - CE Standard 2-Works combined machine (surface planer /thickness planer ) – CE Standard Single-phase motor Planer table width 260 mm Thickness height 184 mm Tilting planer guide Max chip removal 3 mm Kdodjzqrvcepfx Af Hjt Wheels on the base

Condition: used, Year of construction: 2021, power: 4.9 kW (6.66 HP), cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 250 mm, actuation type: manual, rotational speed (max.): 5,300 rpm, Equipment: CE marking, saw blade guard, Format4 Kappa V60 vertical panel saw by Felder, purchased on May 26, 2021, for precise cutting of panel materials in the woodworking shop. Suitable for large-format wood, wood-based materials, and coated panels with minimal space requirements. Key technical data: - Cutting depth: Maximum 60 mm - Cutting height: 2200 mm vertically - Cutting length: 5300 mm - Motor power: approx. 4.9 kW - Saw blade: Ø 250 mm at 5300 rpm - Dust extraction: 2x 100 mm connections - Weight: approx. 910 kg, depending on the model Kedozulpqspfx Af Hedt - Vertical design for space-saving cutting of large panels - Precise horizontal and vertical cuts for panel materials - Particularly interesting for carpentry shops, makerspaces, training workshops, and companies with regular panel cutting needs No warranty

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Kjdpozzcc Isfx Af Hedt Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Kedeywfbuspfx Af Hsdt Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Kedpfx Ajzq Dcuof Hedt Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 80 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,490 mm, travel distance Y-axis: 1,930 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 3,090 mm, workpiece width (max.): 1,530 mm, workpiece height (max.): 85 mm, number of axes: 3, total length: 5,550 mm, total width: 3,850 mm, overall weight: 2,460 kg, table length: 3,090 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, For sale is a nearly unused Felder Format4 CNC profit H08 16.38 F4I CNC woodworking machine. Kdjdpjzy Hdasfx Af Hst The machine was manufactured in 2023. The package includes the machine, a Felder RL 250 dust extraction filter, and a scissor lift table. The machine was purchased and was unused.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Ksdpfx Ajzx Szujf Hedt Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Kdodpfozvh Dysx Af Hot Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. Kedpfxjzv Rcro Af Hsdt TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: excellent (used), Year of construction: 2024, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in very good condition and has been inspected and refurbished by our qualified technicians. (Fully functional) Technical specifications: - Max. airflow rate 3200 m³/h Ksdpfx Afszy U Tis Hedt - Filter area 10 m² - Extraction connection diameter 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture 2024 - Machine no. 31.11.049.24 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Kdjdpsyfvhaefx Af Het Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 96, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2019. - Condition: very good. TECHNICAL SPECIFICATIONS: - Planing width: 630 mm - Planing height: 3-300 mm - Digital control of table height with display - Motor: 7.35 kW - Maximum chip thickness: up to 8 mm - Minimum workpiece length: 250 mm - Diameter of planing shaft: 120 mm - Silent-Power spiral shaft, i.e., very quiet with four-sided knives - Self-aligning planing knives, i.e., no adjustment required after rotation - Additionally, 2 rollers in the table for processing wet or resinous wood - Smooth feed speed adjustment from 4-16 m/min - Power supply: 3 x 400 V - Diameter of dust extraction port: 160 mm - Weight: 845 kg - Dimensions (L / W / H): 125 x 115 x 114 cm Kedpfx Aezim Rrsf Hedt

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Kdedpexg Igisfx Af Hjt

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes Kedpsxix Hxjfx Af Hsdt

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Felder Type: G680 Year of manufacture: 2017 Technical data Power supply: 400 V, 3-phase, 50 Hz Power: 7.22 kW Current consumption: 18.6 A CE marking: Yes Equipment: Kodpfxez Arwqs Af Hedt Jointing unit Gluing unit Pressure zone Cutting unit Milling unit Corner rounding unit Scraper blades Polishing unit Additional glue tank Dust extraction connections with flexible hoses Control panel with digital display Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 3.3 kW (4.49 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 480 mm, Equipment: CE marking, motor brake, Felder FB 510 vertical band saw, purchased on May 26, 2021, for cutting curves, making lengthwise cuts, and creating shaped cuts in wood and wood-based materials. A robust workshop machine for cutting to size, model making, furniture construction, and training purposes. Key technical data: - Machine type: Vertical band saw - Model: Felder FB 510 - Cutting height: approx. 410 mm - Cutting width / throat: approx. 480 mm - Roller diameter: approx. 500 mm - Table size: approx. 500 x 640 mm - Table tilt: approx. -10° to +45° - Band saw blade length: approx. 4318 mm - Band saw blade width: approx. 6–25 mm - Cutting speed: approx. 1100 m/min or 1450 m/min, depending on the model - Motor power: approx. 3.3 kW - Dust extraction: 2 dust extraction ports - Weight: approx. 250 kg - Versatile machine for curve cuts, contour cuts, ripping, and general cutting - Suitable for solid wood and wood-based materials - Of interest to woodworking shops, model makers, training centers, and makerspaces Kjdszun Szspfx Af Hedt No guarantee.

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: Kodpfx Aoxnxm Nsf Hsdt - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Kdedpfx Afjzuywij Het Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Kdedpfezuw H Iex Af Hot Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive Kdsdpfxozuw E Ro Af Het - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Ksdpfx Afoy N Sdyo Hedt Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: excellent (used), 3 kW motor, Automatic dust extraction, 160 mm dust extraction port, 2400 Pa vacuum, Kodpfezy Ur Eox Af Hsdt Max. air flow 3200 m3, Very good condition.