Used Nilfisk T 40 for sale (81,766)

Year of construction: 2019, condition: used, machine/vehicle number: 37943, Maximum capacity: 2,200 kN, working width: approx. 400 cm, automatically adjustable stops, automatic tool changer, 1-level rolling carriage with accessories. Iodozqzakopfx Ahnsig

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Iiodpfey U Nqbex Ahneg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 197 h, load capacity: 40,000 kg, fuel type: electric, battery model: EPzS, battery capacity: 1,250 Ah, battery voltage: 80 V, overall weight: 53,500 kg, empty load weight: 13,500 kg, total height: 2,750 mm, total length: 8,210 mm, total width: 2,500 mm, color: grey, Equipment: CE marking, UVV, air conditioning, cabin, lighting, with TÜV inspection report for obtaining an exemption permit according to § 70 of the StVZO (Road Traffic Licensing Regulations) for use on public roads. Current battery condition reports from July 31, 2026. Loading area: clear loading area behind the cabin approx. 6660 x 2490 mm Loading height: approx. 1000 mm Loading area cover: diamond-patterned sheet metal Steering: two-axle steering Driving hours: 197 Battery: 2 units (exchange battery) 80 V 10 EPzS 1250 Ah, K5 Technical condition: very good Optical condition: very good Operating conditions: level, paved road in internal traffic 90° curve from 4800 mm to 4800 mm road width, inner corner approx. 1200 x 1200 mm beveled, theoretically possible to navigate with approx. 50 mm clearance to the driving width, practically not navigable gradient of approx. 5% over a length of approx. 10 m indoor and outdoor use with approx. 10 km total distance per day two-shift operation on 6 days a week Payload: 40 t at 6 km/h in internal factory traffic Load distribution front and rear approx. 70:30 Loading area: External dimensions of the vehicle approx. 8200 x 2500 mm clear loading area behind the cabin approx. 6660 x 2490 mm Loading height approx. 1000 mm Loading area with diamond-patterned sheet metal cover Chassis: two steered axle lines with two swing axles each, and two non-steered, driven axle lines mounted on four longitudinal rocker arms uniform wheel load distribution via swing axles or longitudinal rocker arms Drive wheels with track-free, elastic solid rubber tires approx. Dm 559 x 406 mm Wheels on the swing axles 457 x 304 (2×152) Wheel hubs with tapered roller bearing and permanent grease lubrication Drive and control: Wheel hub three-phase motors 80V approx. 4 x 6.4 KW with electronic differential function to which the drive wheels are mounted Driving speed adjustable continuously via foot pedal Dual AC pulse control system for drive and steering Control cabinet located on one longitudinal side of the platform truck Vehicle electrical system: entire vehicle electrical system (excluding 80V drive) designed for 24V via voltage converter Front headlights with rear and brake lights as well as turn signals. Reflectors mounted on the front, rear, and both longitudinal sides in accordance with StVZO. Battery and charger variant: for payload 25t + 12t self-weight = total weight 37t 7 – 8 h charging time Range per battery > 6,000 m 1200 charge cycles Iiedpeyrf Uiofx Ahnsg 1 x battery 80 V 10 EPzS 1250 Ah, K5 1 x exchange battery 80 V 10 EPzS 1250 Ah, K5 stationary charger D 80/180 Electrolyte circulation Aquamatik Additional equipment: behind the cabin on the left longitudinal side in the direction of travel, an access to the loading area, a pluggable or fixed handrail, storage space for the non-plugged handrail attached to the vehicle a 300 mm high stop bar attached to the front end the vehicle can be maneuvered from the cabin or via a radio-controlled hand-held remote control outside the cabin on both longitudinal sides, 9 lashing eyes/crane bars made of round steel are welded horizontally into the outer supports Ultrasonic sensors for distance measurement (object detection, not a personal protection device), creep speed and emergency stop shutdown variably adjustable. Rear view camera system with screen Safety devices: 2 emergency stop buttons on the rear

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l Isdpfxoxh Rulj Ahnsig 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: used, mileage: 8,405 km, power: 243 kW (330.39 HP), first registration: 06/1995, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, color: yellow, gearing type: mechanical, number of gears: 16, emission class: euro1, suspension: steel, total width: 2,500 mm, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 1,200 mm, Year of construction: 1995, Equipment: crane, Daf CF 85.330 Original Dutch truck, one owner! Only 8,400 km! 6x2 / 10 tires Full spring suspension. 16-speed manual gearbox. Crane: Ferrari 940. A5 4 x hydraulic outriggers. 5 x hydraulic extension. Radio remote control. 2.65 m - 13,700 kg. 4.47 m - 8,300 kg. 6.37 m - 5,700 kg. 8.34 m - 4,100 kg. 10.45 m - 3,050 kg. 12.65 m - 2,300 kg. 14.65 m - 1,800 kg. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 295/80R22.5; Steered; Tire tread depth left: 75%; Tire tread depth right: 75% Rear axle 1: Double tires; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Tire size: 295/80R22.5; Double tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Weights Unladen weight: 17,460 kg Payload: 8,540 kg GVW: 26,000 kg Functional Iijdpfx Aoxiwzbjhnog Crane: Ferrari Identification Model number: CF 85.330 ATI / 40 t/m CRANE / K = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT) / Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3520191300779, operating pressure: 220 bar, input voltage: 400 V, overall weight: 85 kg, The Nilfisk MC 5M is equipped with a hose reel and a new rotary nozzle. The water pressure can be adjusted using an adjustment wheel on the high-pressure cleaner. It is extremely maneuverable, making it suitable for mobile use in everyday work. Iodpsuwlxfefx Ahnsig Technical data: Pressure: 220 bar Cleaning performance: 6.2 Max. inlet temperature: 60 degrees Dimensions: 890x570x1020 (length x width x height) in mm Weight: 85

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Injection unit 1: Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Iiedpfxoyyz Dds Ahnsg Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Injection unit 2: 30 mm Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: excellent (used), Year of construction: 2019, operating hours: 6,854 h, lifting height: 4,100 mm, fuel type: gas, mast type: duplex, power: 55 kW (74.78 HP), total height: 2,840 mm, total length: 3,000 mm, total width: 1,450 mm, color: other, Empty weight: 6.350 kg Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE Iisdpjx Adubsfx Ahnjg

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Iodpfxotrhv Ss Ahnoig Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: used, functionality: fully functional, Main Technical Specifications Machine Model: COMDEC LV 50-40 PFT horizontal baling press Pressing force: 50 tons Horizontal hydraulic baler for cardboard, paper and industrial waste Electrical data Power supply: 380 V / 3 phase / 90 A Hydraulic motors: 2 × 22 kW hydraulic pump motors Conveyor pump motor Hydraulic system Hydraulic main cylinder: 180 / 150 × 2000 mm Hydraulic pressure control system with oil cooling and filtration Oil tank with pressure and return filters Machine dimensions Iisdjy Uddiopfx Ahnjg Total machine length: approx. 8,394 mm Width: approx. 1,920 mm Height: approx. 3,104 mm Functional equipment Automatic wire tying system Bale length control system Hydraulic wire twisting unit Automatic bale ejection system Conveyor control cabinet and electrical automation system Noise level Working noise level below 70 dBA

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: N1000065167, "FLOOR WASH MACHINE TERA 1102 - NILFISK SC 6500-1100D, Serial NO. N1000065167 , Construction date 28.02.2019" Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Sebes, Romania The buyer can assist in disassembling the machine. Iiedpfx Ajv Ax Awehnsg The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, operating pressure: 210 bar, empty load weight: 149 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, NILFISK MH 4M -210/1000 PAX HOT WATER WASHER NEW COIL Manufactured in 2017 The machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 210 bar and up to 940 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each unit we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Flow rate [l/h]: 940 Working pressure [bar]: 210 Max. Heating temperature [°C]: 85-150 Connection power [kW]: 8 Detergent tank [l]: 10+10 Hose length [m]: 10 Weight [kg]: 149 EQUIPMENT: NEW COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Iijdpfxjx Ewupo Ahnsg Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: repair required (used), Year of construction: 2019, machine/vehicle number: N1000065258, "FLOOR WASH MACHINE TERA 1102 - NILFISK SC 6500-1100D, Serial NO. N1000065258 , Construction date 28.02.2019" Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Sebes, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Iisdpfsv Axycjx Ahnsg

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Isdpfx Aswtg Hdehnjig

Condition: good (used), Year of construction: 2009, ENGEL Emotion 440/100T Clamping force: 1000 kN Opening stroke: 400 mm Ejector stroke: 130 mm Ejector force: 37 kN Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Iisdpfx Aoyktp Sjhnog Nozzle contact force: 40 kN

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group Iiedstxtzkjpfx Ahnog

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights Isdpfx Ajymf Nvohnoig - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesInfeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still and sparkling applications. The inclusion of a Win & Tech microfiltration unit enhances p... Isdpfx Ajzd Ucxehneig

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Ijdpfehtm E Nex Ahnjig Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: used, axle configuration: 3 axles, first registration: 09/2006, color: other, Year of construction: 2006, Empty weight: 4.780 kg Axle 1: left 10 mm right 10 mm Iiedoxakxbspfx Ahnog Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm Iijdjqw Aacjpfx Ahnjg coil weight: 40 t coil ID: 508/610 mm

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,155 mm, total width: 1,469 mm, total height: 2,000 mm, overall weight: 3,300 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 40×2000 MTP-3212 The MTP 40×2000 Hydraulic CNC Servo Press Brake is a modern machine designed for precise sheet metal bending in manufacturing plants, workshops, and metalworking companies. Thanks to its CNC controller and high-quality components, it provides accuracy, repeatability, and operator comfort. MAIN ADVANTAGES • 40-ton pressing force • 2000 mm bending length • MTP-3212 CNC controller • Servo-driven X and Y axes • AMADA-type tooling system • Rexroth, Schneider and Omron components • High bending accuracy • CE certification MTP-3212 CNC CONTROLLER The modern CNC controller features a color touchscreen for fast and intuitive programming. The software automatically calculates bending parameters and allows storage of up to 40 punch types. EQUIPMENT • Upper punch • Lower die • 2 front support arms • X-axis – servo drive • Y-axis – servo drive • R-axis – manual adjustment Ijdpfsyttfrex Ahneig • AMADA-type quick clamping system COMPONENTS The machine is equipped with Rexroth hydraulic valves, Schneider Electric electrical components, and Omron safety devices. Steel hydraulic connections increase system durability and reduce the risk of leaks. SAFETY • Safety light curtain • Side safety guards • Rear safety fence • Emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL DATA Pressing force: 40 T Bending length: 2000 mm Maximum sheet thickness: up to 3 mm Distance between side frames: 1600 mm Throat depth: 200 mm Stroke: 100 mm Open height: 300 mm Back gauge travel: 600 mm Motor power: 4 kW Weight: 2950 kg Dimensions: 2200 × 1200 × 1850 mm APPLICATIONS The machine is suitable for the production of metal enclosures, electrical cabinets, ventilation components, steel structures, bent profiles, and custom-made sheet metal parts. DELIVERY AND SUPPORT We organize machine transport throughout Europe. We provide technical support, assistance with machine and tooling selection, and access to spare parts and service. Contact us for more information and discover our complete range of metalworking machinery available on our website.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 100.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand-stacking, boltless shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 100.06 linear meters Shelving offer of 100.06 linear meters consisting of: - 0101 x uprights approx. 200 x 40 cm, pre-assembled - 0600 x shelves approx. 100 x 40 cm. - 2400 x shelf supports. - 0100 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 storage levels. - Surface: Sendzimir galvanized. Ijdpszy Utijfx Ahnsig - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €7,118.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery can be arranged via our partner logistics company, if desired. The costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning to ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 15,000 mm, empty load weight: 212 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 99 °C, NILFISK ALTO SOLAR BOOSTER 7-58 D HOT WATER PRESSURE WASHER This machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 1110 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each machine we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 1110 Operating pressure [bar]: 170 Max. heating temperature [°C]: 99 Connection power [kW]: 6.9 Hose length [m]: 15 Weight [kg]: 212 Dimensions (L x W x H mm): 900 x 700 x 940 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 15m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Iiedjw Dpicjpfx Ahnjg

Condition: good (used), axle configuration: 3 axles, first registration: 02/2005, total length: 13,600 mm, suspension: air, tire condition: 50 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - air suspension - Disc brakes Isdpfx Aeza Diuehnjig = More information = Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Technical condition: good Visual appearance: good