Used Pavoni V2400 Open Top for sale (17,301)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Kdedszuzw Dopfx Ahhsr Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 3 kg, first registration: 04/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY MATERIALS WITH REAR OPENING, TWO SWING DOORS, 200 MM BEAMS, BRAND NEW FLOOR REF: 26-U-55 TYPE: Bulky waste CONDITION: Used LID: No OPENING: Rear, two swing doors OVERALL DIMENSIONS Kdjdpeygy D Uefx Ahhsr TOTAL EXTERNAL LENGTH: 6.50 m + 0.20 m EXTERNAL BODY WIDTH: 2.50 m FRONT PANEL (INTERNAL / EXTERNAL): 2.20 m / 2.40 m REAR PANEL (INTERNAL / EXTERNAL): 2.20 m / 2.40 m SIDE PANEL (INTERNAL / EXTERNAL): 2.20 m / 2.40 m CAPACITY: 33 m³ WEIGHT: 3,050 kg FLOOR THICKNESS: 4+4 mm WALL THICKNESS: 3 mm COLOUR: Green Subject to errors and/or omissions. Prices shown are exclusive of VAT. Please contact our sales department for the latest pricing and terms. For further information: Loris: +39 348 4773001 URL: #thespecialistsforrolloffsystems AURORA ROLL-OFF SYSTEMS Operates in the sales and purchase of industrial and commercial vehicles, specializing mainly in the waste sector. Specialized in trucks, trailers, and roll-off equipment. Stock ready for immediate delivery: over 50 trucks and over 150 containers, both roll-off bins and containers with and without cranes. E.&O.E. Due to the large number of listings and included details, Aurora invites you to verify the accuracy of the information with the sales staff.

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Kdodpfxov Ha Uij Ahher Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: used, mileage: 2,50,000 km, power: 105 kW (142.76 HP), first registration: 01/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz Sprinter 314 CDI panel van L2-H2, support vehicle Kedpezuv Rlefx Ahhsdr German vehicle from Mercedes-Benz leasing. 1 owner – in top condition. Tires are NEW. Conversion with bed and 220V power outlets. Long-distance vehicle. 8 tires. Special equipment: 2nd battery (auxiliary battery) in the interior, airbag on the passenger side, audio system: MB audio system radio with USB and Bluetooth hands-free system, grab handle on the rear pillar on the right side, chassis: stabilization level I, windows in the cargo/passenger compartment: sliding, front right, wooden floor in the cargo area, folding cover for storage compartment, folding cover for storage compartments left/right, comfort chassis, fuel tank: main tank 93 liters, charging package dashboard (USB connections and 12V socket in addition), cable duct on the rear door, cable duct on the side wall, steering wheel with multifunction, marker lights on the side, fog lights with cornering light, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seat belt system with warning system (passenger side), seats in the cab: driver's seat heated, seats in the cab: driver's seat comfort, seats in the cab: driver's seat with lumbar support, 230V socket in the cab, battery separator relay in addition, step on the rear door, jack, auxiliary heater (air) with timer. Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag driver side, traction control system (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, brake assist, headliner in the cab, automatic activation for driving lights, grab handle for the sliding door on the cargo compartment partition, electronic brake force distribution (EBV), driver assistance system: crosswind assist, rear door (opening angle 180 degrees), body/structure: high-roof panel van standard, keyless start, child lock, communication module (LTE) for digital services, cargo compartment partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, seat belt system with warning system (driver side), seat cover/upholstery: fabric, seats in the cab: passenger seat adjustable, start/stop system engine, preparation for DAB radio reception, service interval display Assyst, heat protection glazing, permissible total weight 3.50 t. * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION * + * Trade-in and financing are possible. * Errors are not excluded. * Please check the equipment on the vehicle. Errors and prior sale are subject to change.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top Ksdex Eb Anopfx Ahhodr - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 8,685 mm, total width: 2,550 mm, total height: 3,970 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center axle trailer Fine-grained steel welded construction Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened! "Vario-Lash" lashing rings for use in the "Load-Lock profile", 2.5 tons each, loose Gear-supported front legs, with a straight lower part and single-sided operation on the right Telescopic rear support Retractable ladder at the rear Door latch on the side Chocks with holder Aluminum side impact protection Steel underrun protection Quarter panel fenders in front of and behind each axle Rear impact protection Plastic toolbox with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Coupling device for center axle trailer, according to customer requirements Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle EBS, electronic braking system with EBS plug at the front, with connection cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle – driving stability system Wheels and tires 385/65 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length approx. 6,900 mm Front bulkhead / corner posts at the front 2,580 mm high, steel corner posts in a full-volume design, release mechanism for side tarpaulin on the front bulkhead Center posts Sliding posts, can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom Insertion slats Rows of aluminum V-insertion slats Rear bulkhead / corner posts at the rear Rear corner posts, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioner Rear portal doors, 2-wing, each with 2 internal rotating bar locks Tarpaulin Tarpaulin with welded horizontal and vertical straps Tensioners made of stainless steel Kodozcqh Nopfx Ahhodr Customer lettering on side tarpaulins and rear portal possible Roof Fixed roof with tarpaulin and bows, tarpaulin color: white Optimal rain gutter at the rear, at the top of the end bow, above the doors Registration country / signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Load securing certificate according to EN 12642 XL 24/7 service hotline prepared for license plate holder, single row Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels) Reflective strips: red, around the rear portal *also available as a drive-through version Customized transport solution

Condition: used, mileage: 1,05,815 km, power: 125 kW (169.95 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M629----RENAULT MASTER BOX VAN 2.3 DCI BOX VAN L4 H3----KM: 105,815, WELL-MAINTAINED SERVICE HISTORY----LAST INSPECTION WITH OIL CHANGE AT 103,313 KM----LIKE-NEW M+S TIRES----* CRUISE CONTROL * SPEED LIMITER * ECO BUTTON * REARVIEW CAMERA * PARKING ASSISTANCE (PDC) REAR * TRACTION CONTROL * AIR CONDITIONING * EMERGENCY BRAKE ASSIST * START/STOP ----270° REAR DOORS----SUSPENSION SEAT----3 SEATS----* MULTI-FUNCTION STEERING WHEEL * ELECTRIC EXTERIOR MIRRORS * ELECTRIC WINDOWS * WOODEN FLOOR WITH 12 EYELETS * ALUMINUM WALLS * LASHING RAILS * START/STOP * STORAGE COMPARTMENT IN THE ROOF AREA * CENTRAL LOCKING WITH REMOTE * BLUETOOTH HANDS-FREE SYSTEM * USB * ONBOARD COMPUTER * ARMREST * WITHOUT SLIDING DOOR * STORAGE COMPARTMENT IN THE CAB * PASSENGER SEAT CAN BE FOLDED DOWN AS A TABLE ----Special equipment: * Storage package * Storage compartment (closed) centrally in the dashboard * Seats in the cab: Double passenger seat multifunctional with storage compartment * Storage compartment with footwell lighting * Clipboard on the dashboard * Speed limiter system * Rear tailgate doors (opening angle 270 degrees) * Interior trim of the cargo area partition * Glove compartment with cooling function * Comfort-Plus package * Onboard computer * Parking assistance rear Kodpfx Ajzp Tw Eohhodr * Seats in the cab: Lumbar support for the driver's seat * Metallic paint * Wheel covers * Spare wheel in driving condition * Seats in the cab: Driver's seat mechanically sprung Additional equipment: * Storage gallery * Airbag driver side * Exterior mirror elect. adjustable and heated * Outside temperature display * Boundary lights on the side * Rev counter * Electronic brake force distribution * Anti-slip regulation (ASR) * Interior filter: Pollen filter * Body/structure: Box van, high-roof standard * Fuel tank: 105 liters * Cargo area partition * Steering column (steering wheel) height adjustable * Model refinement * Engine 2.3 L, 125 kW dCi diesel FAP Energy CAT * Wheelbase 4332 mm * Smoker's package * Low emission according to emission standard Euro 6 * Gear shift indicator * Sliding door cargo/passenger compartment right * Mud flaps front * Side protection strips * Seat cover/upholstery: Fabric * Seats in the cab: Driver's seat height adjustable * Start/Stop system engine * Lashing eyelets cargo floor * Heat protection glazing * Permissible total weight 3.50 t ----If desired, we can retrofit the vehicle with a trailer coupling. Professional installation – fast and reliable, starting from 599 €. +++ Exclusive offer at Autohaus Mat GmbH: Up to 1,000 € trade-in bonus – your advantage for changing vehicles! (only applies to commercial vehicles) +++ Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We take over the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when buying a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing options tailored to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will accompany you from the first consultation to the vehicle handover. 4. Our additional services: In addition to the vehicle purchase, we offer exclusive services for a smooth process: * Worldwide vehicle sales: Support with the purchase and export, wherever you are. * Transfer license plates

Condition: used, Technical specifications: Max. planing width: 530 mm Cutterhead diameter: 120 mm Number of knives: 4 Total length of tables: 2900 mm Table height adjustment Tilting outfeed table Safety switch Power supply: 380 V Motor power: 5 kW Kdedpfx Ahozia Dxjher Overall dimensions: Length: 2900 mm Width: 1300 mm Height: 1300 mm

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm Kdedpfx Ahetu Hvweher incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: used, functionality: fully functional, mileage: 4,35,905 km, fuel type: diesel, color: blue, driver cabin: sleeper cab, emission class: euro6, number of seats: 2, Year of construction: 2018, Equipment: air conditioning, crane, DAF XF 530 FAN 6x2 - Year 2018 DIESEL/ Euro 6 Mileage: 435,900 km Automatic transmission/ Engine displacement: 12902 cc/ Power: 390 kW Kedpfx Aszi Rtdohhjdr GVW: 260 quintals Payload: 17,100 kg (without body)/ Wheelbase: 4,400 mm Accessories: - Full air suspension - Enhanced engine brake - Air conditioning Body: - CURTAIN-SIDED BOX, 7500 x 2550 x H 2700 mm * Adjustable height side and top opening - FIXED BOX, 6400 x 2530 x H sideboards 800 mm - HIAB 200 C-4 crane * 4 outriggers, hydraulic * Radio

Condition: new, Year of construction: 2025, color: white, new (ONE-WAY) 20FT OPEN SIDE CONTAINER 1x side fully openable via 2 folding doors 2x available = Further information = General information Year of manufacture: 2025 Model year: 2026 Kjdjy I Ut Uopfx Ahhodr Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Unladen weight: 3,080 kg Payload: 27,400 kg Gross weight: 30,480 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Further information Please contact Arne Honingh for more information.

Condition: new, Year of construction: 2025, color: white, new (ONE-WAY) 20FT OPEN SIDE CONTAINER 1 side fully openable via 2 folding doors 2x available = Further Information = General Information Year of manufacture: 2025 Model year: 2026 Serial number: RX2519277 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Kedey Ndlijpfx Ahhjdr Weights Empty weight: 3,080 kg Payload: 27,400 kg Gross weight: 30,480 kg Condition General condition: very good Technical condition: very good Visual condition: very good Further Information Contact Arne Honingh for more details.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading Kodpfezuzlnox Ahhsdr • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2024, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, loading space volume: 18 m³, Year of construction: 2024, Equipment: ABS, TRAILERTECH DB200 2-Axle Building Materials Trailer 7.30 m open * Cargo securing system integrated in the wooden floor * Fully galvanized chassis, painted grey! * Payload approx. 14,100 kg * Vehicle No. for customer inquiries: 4603 * Air suspension * EBS (Electronic Braking System) * Anti-lock Braking System (ABS) * Chassis hot-dip galvanized * Load securing according to VDI 2700 ff EN12642 XL * Front wall height 1600 mm * Kinnegrip locks * 40 mm high aluminum profile floor * Continuous center lashing rails * 3 pairs of lashing rings in the corner stanchions * Tires: 385/55 R 22.5 * Storage box * SAF axles, 9 tons * Y drawbar * Heavy-duty rear view camera * Disc brakes * New roadworthiness inspection (HU/AU)! No liability for misprints or typographical errors. Sale exclusively to commercial customers. Errors and prior sale excepted. * Modifications, prior sale, and errors explicitly reserved. Description serves vehicle identification only and does not constitute a warranty as defined under sales law. The contract description is binding. * TOP SERVICE & QUALITY Kedpfx Ahjywcz Sehjdr * We can provide you with a LEASING–FINANCING–HIRE PURCHASE offer * Warranty insurance available upon request from the insurer * TÜV / UVV LBW / tachograph check and installation of OBU device possible through our local partners * 30-day export license plates available * All necessary export documents can be arranged, must be requested individually * Toll for Toll-Collect can be booked on site * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH: Andreas Pittas, Thomas Pittas, Alexander Pittas, Robin Pittas * WHATSAPP number: * ---- Visit us on our website * Over 200 vehicles in stock at all times

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 Kedpfxjythdps Ahhodr 1 deck Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Space requirement approx. 3000 x 1500 x 1800 mm Weight approx. 3000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, without warranty or guarantee

Condition: used, axle configuration: 2 axles, first registration: 05/1999, wheelbase: 730 mm, Year of construction: 1999, Unladen weight: 420 kg Payload: 1,580 kg Gross vehicle weight: 2,000 kg Damage: none Registration number: WV-35-ST Ksdpfx Aozvczaehhsdr

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm Kjdpfxozc Hvps Ahhjdr • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: used, mileage: 2,57,000 km, power: 125 kW (169.95 HP), first registration: 03/2020, fuel type: diesel, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,981 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Airbag, passenger side, Airbag, driver side, Trailer Stability Assist (TSA), Trailer socket, 13-pin, Audio/radio remote control on the steering wheel, Radio preparation, 4 speakers, Voice control and Bluetooth interface, Driver assistance system: Emergency call system, FordPass Connect incl. eCall, Smartphone interface (Apple CarPlay & Android Auto), Exterior lights, rear, top, LED, Exterior mirrors, electrically foldable, Window in sliding door, right, fixed, Vehicle without vinyl floor covering in the cargo/passenger compartment, Speed limiter, 130 km/h, Rear wing doors with glazing (opening angle 180 degrees), Rear window, heated, Interior mirror with automatic anti-dazzle function, Cold start package, 2nd battery, Cargo area light, LED, Cargo area partition, plastic with window, Mud flaps, front, Steel rims 6.5x16, Auxiliary heater package 1, Additional heater with timer, Remote control for auxiliary heater / additional heater, 2nd battery Kedozu Dvvjpfx Ahhedr Additional equipment: Storage compartment in the headliner of the cab, Trailer Stability Assist (TSA), Exterior mirrors, electrically adjustable and heated, Indicator in exterior mirror, Floor covering: Vinyl in the cargo/passenger compartment, On-board computer, Entry lights, Electronic brake force distribution (EBD), Electronic traction control, Heater with recirculating air function, Body/structure: High-roof box van, Body variant: Medium-high roof, Steering column (steering wheel) adjustable in height and length, Engine 2.0 Ltr. - 125 kW TDCi CAT, My Key (2nd vehicle key programmable), Parking pilot system, front and rear, Wheelbase 3750 mm, Tyre repair kit, Low emission according to emission standard Euro 6d-TEMP, Gear/selector knob, leather, Windscreen wipers with intermittent function, adjustable, Sliding door, cargo/passenger compartment, right, Mud flaps, rear, Side protection strips, Seat package 13: Driver's seat (4-way adjustable) - passenger double seat, fabric, Seats in the cab: Driver's seat with lumbar support, Start/Stop system, Trend, Rear step integrated, Panelling in the cargo/passenger compartment: high, Panelling in the cargo/passenger compartment: Vinyl, Lashing eyes (10), Roll stability control (RSC), Heat-insulating tinted glass, Additional heater, electric, Second key with folding remote control

Condition: ready for operation (used), Year of construction: 2008, Nordson AltaBlue 10 TT (10/4; 10 litre/max. 4 hoses): The Nordson AltaBlue 10 TT is a compact 10-litre hot melt adhesive applicator designed for precise adhesive dispensing in industries such as packaging and product assembly. The 'TT' model denotes the 'Table Top' version, recognised for its user-friendly interface and low-maintenance construction. This unit supports up to 4 hose connections. Kedpfoy N Dbwsx Ahhedr Key Specifications: - Capacity: 10-litre tank for hot melt adhesive - Pump System: Gear pump driven by a variable-speed AC motor - Temperature Range: Adjustable from 40°C to 230°C (100°F to 450°F), with a stability of ±0.5°C - Maximum Pressure: Up to 75 bar (1100 psi) hydraulic working pressure - Filtration: Incorporates a Saturn basket-style filter to prevent contamination of the application heads Features & Benefits: - Non-stick Tank: The tubular tank features a Teflon coating to eliminate 'dead spots' and minimise adhesive degradation (burning) - Key-to-Line Functionality: Pump speed can be synchronised with the production line speed for consistent adhesive output - Easy Maintenance: Accessible panels and a large tank opening make refilling and cleaning straightforward - Connections: Capable of supporting up to 2 or 4 hose/gun sets, dependent on specific configuration (single or dual stream)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: BM17115077, 🔧 Automatic Bar Feeder – Top Automazioni MA315SX For sale is a fully functional automatic bar feeder from Top Automazioni (Italy), designed for use with CNC lathes. 🏭 Manufacturer: Top Automazioni 📌 Model: MA315SX 📅 Year of manufacture: 2018 🔢 Serial number: BM17115077 ⚖️ Weight: approx. 500 kg ✅ CE compliant ⚙️ Technical Specifications • Suited for bar material up to 3 meters in length • For bar diameters up to Ø 12 mm • Automatic and stable material feeding for serial production • Robust and proven construction by Top Automazioni Kedex Hgpfopfx Ahhjdr 🔌 Machine Integration • The bar feeder was previously connected to a Tsugami CNC sliding headstock lathe • Machine interface and operation were fully functional up to removal ⚡ Electrical Data • Supply voltage: AC 230 V • Frequency: 50 / 60 Hz • Rated current: 7.8 A 🛠️ Condition • Used • Technically flawless / fully functional • Normal wear according to age and prior use 📍 Location • Stuttgart area, Germany 📦 Scope of Delivery • Bar feeder as illustrated • Sold as-is Inspection is possible by arrangement. Further technical information or customized options can be discussed upon serious inquiry.

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. Kedpfxsu Itk Re Ahhjdr The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, color: other, Year of construction: 2004, Carrying capacity: 5 kg Lifting capacity: 5 kg Serial number: 4610/04 Equipped with an electric hoist Hoist brand: Abus Load capacity: 5 metric tons Span: 12,875 mm Single-girder construction Clear height under the bridge: 5,000 mm Power supply: 400 volts, 50 Hz Includes remote control Includes documentation and electrical schematic Radio-controlled remote Collision protection Two fixed hoisting speeds - Dual drive at the top - No rails required; the crane moves across the floor An interesting selection of overhead cranes and semi-gantry cranes from renowned brands. Brands: ABUS, Demag, and KONE Lifting capacity: 5, 10, 15, and 20 metric tons Span width: up to approximately 30 meters Years of manufacture: 1989 through 2012 Models: overhead cranes and semi-gantry cranes The lots will be loaded onto your chosen mode of transport. The price is listed for each lot. If desired, transportation can be arranged for an additional fee. View the full selection, technical specifications, and auction terms on the auction page The online auction opens Sunday 16 August and closes Friday 28 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Kdodozuwtbopfx Ahhsr Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, NET WEIGHING FILLING SYSTEM TYPE TOPLINE 1200 Reaching hourly capacities of 1200 bags (ONE THOUSAND TWO HUNDRED BAGS/HOUR), the TOPLINE has been designed to meet the requirements of high-speed filling of open mouth bags. In combination with our high-capacity NET WEIGHER, the TOPLINE 1200 is the perfect machine for fully automatic filling of granulated products. The bags are singled and opened by rotating grid singling system. After filling through flap-filling spout, the bags are transferred to the bag closing system by upper belt guiding. For clean and dust-reduced transport of the bags, the bags are kept shut until they reach the bag closing system. The machine was purchased directly from Behn + Bates in 2023 used for about months. The machines construction is 2015-17 but was UNUSED/NEW idle at another customer and returned to Behn + Bates. In the Year 2023, the nearly new machine was fully upgraded to current and latest technology at Behn + Bates factory in Germany then put in production in France. New machine costs EUR 400,000+ with 9-18 months lead time. This is a great opportunity to buy at discounted price and available immediately! Video in operation available upon request. Machine Technical Data: - Electric power 17 kW - Compressed air 160 ltr./bag plus 18 m³/h at 5 bar overpressure - Dedusting air 1.750 m³/h at 10 mbar under pressure - Weighing range 10 - 52 kg adjustable in 50 gm steps - Operation 1 person for the operation of the plant and for manual supply of the bags into the magazine - Output up to 1,200 bags/h Bag - Product Specifications: - Bag type flat open mouth bags AND gusseted open mouth bags - Flat Open Mouth Bag width 400 mm – 600 mm & Bag length 550 mm – 1000 mm - Gusseted Open Mouth Bags 380 mm – 600 mm (min. 320 mm between gussets) & Bag Length 550 mm – 1000 mm - Product examples crystal sugar, rice & grain, seed, dehydrated vegetables, animal feed & pet food, etc. Characteristics
Diagnosis and functional test of the inputs and outputs Kdedpfoyah R Aex Ahher
Touch panel with integrated troubleshooting
Electronic weighing system MEC
Dosing time regulator
Product contacting parts made of stainless steel
Central dedusting connections
Empty bag magazine with space for 5 bag bundles
Rotating grid singling system
Bag singling and opening by vacuum
Radial inlet flap with servo drive
Double bottom flaps
Three load cells
Flap-filling spout with internal deaeration
Liftable bag bottom vibrator
Full bag transfer by upper belt guiding Your benefits
High capacity
High weighing accuracy
Easy cleaning
Compact filling system
Easy palletizing due to perfectly shaped bag bottom
High filling degree and good product compaction due to bag vibrator
Intermittent bag transfer at the top of the bag = bags kept shut
Integrated electric control panel = quick assembly
Clean packaging area due to the encapsulated system
Lockable inspection doors on both the weigher and flap inlet
Easy product change

Condition: excellent (used), functionality: fully functional, working width: 1,400 mm, plate length: 3,500 mm, stroke length: 450 mm, Automatic Hydraulic Pressing Line with Heated Platens – Excellent Condition We offer a complete industrial pressing line with a fully automatic continuous cycle (loading – pressing – unloading and stacking), ideal for the production of 2- and 3-layer parquet, veneering, engineered flooring, and other wood-based applications. Technical Specifications: Work platen dimensions: 3500 x 1400 mm Heavy-duty drilled solid steel platens Opening stroke: 450 mm Heating system: diathermic oil boiler (capacity: 200 liters) 6 large-diameter pistons – top-down pressing Platen height from floor: 800 mm Platen closing time: 1–2 seconds Opening/closing cycle time: 2–3 seconds Working pressure: 10 kg/cm² Installed power: 10 kW Automatic loading conveyor Unloading roller conveyors Robust frame made of seamless steel sheets Kedpfxswiw Uqs Ahhodr Independent electrical control panel The machine is in excellent working condition. Its heavy-duty construction ensures reliability and durability in demanding industrial environments. Price: negotiable Feel free to contact us for more information, photos, or to schedule a machine inspection

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Kjdpfxeu Tyzqe Ahhsdr