Used Piesok Motorized Guillotine Shears for sale (25,178)

Condition: good (used), Year of construction: 1990, Used plate shear from Haco Fjdpfx Apsz Il Ido Dogh Type TS 3006 Capacity 3100 x 6 mm Adjustable back gauge and cutting angle Manually adjustable shear gap

Condition: good (used), functionality: fully functional, Size: 25 / 3.25 Cutting length: 2540 mm Sheet thickness at 400 N/mm²: 3.25 mm Cutting angle, approx.: 1.3° Strokes per minute: 50 H/min Drive power: 7.5 kW Fgodpfez Iznmex Ap Djh

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Fgodpfx Aszl A Raep Dsh Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), Year of construction: 1993, functionality: fully functional, total width: 2,550 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 7,500 kg, Manufacturer: LVD Model: HST 40/6 Location: Strojrem, Križevci Year of production: 1993 Bending length: 4050 mm Max bending thickness at 45 kg/mm²: ~6 mm Working stroke: 1000 mm Fgjdpfx Aovtl Nrop Deh Machine dimensions: 4900x2550x1800 mm Machine weight: 7500 kg Machine rated power: 12 kW

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Fedpsykl Nksfx Ap Degh Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.

Condition: like new (used), 2 unused blades for guillotine shear to standard quality → sold as used. Length = 3150 mm Fgedpez Aybkefx Ap Doh Width 1 = 66.5 mm Width 2 = 68.5 mm Thickness = 19 mm Through holes, D = 10 mm All further data can be found in the attached drawing.

Condition: good (used), Maqfort HGD 3013 3200x13mm Runs well, but the back gauge needs to be checked! Fedpfx Apjzdzn Uo Dogh

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Fedpfx Aozia Nzjp Dsgh Shear angle 3 degrees Working pressure 7 to 10 bar Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Rear guarding Trailing footswitch

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used Baykal plate shear Type MGH 3100 16 Capacity 3100 x 16 mm Adjustable back gauge Fjdszvqqijpfx Ap Djgh Adjustable cutting clearance Rear safety guard

Condition: good (used), RAS panel shear, 4m length, capable of cutting sheet metal up to 5mm thick, in good condition, with hold-down function. Fodpjzgf Uqofx Ap Dogh

Condition: used, functionality: fully functional, Year of construction: 1988, Schechtl guillotine shear Fgsdpfoy I Uulox Ap Deh With signs of use, but operates flawlessly

Year of construction: 1990, condition: ready for operation (used), An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible. Fjdpeuxdifsfx Ap Dsgh

Condition: like new (used), functionality: fully functional, back gauge: 750 mm, overall weight: 3,500 kg, total length: 2,800 mm, total width: 1,900 mm, total height: 1,660 mm, number of support arms: 3, year of last overhaul: 2019, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO TS 2006 in very good condition Working length: 2050 mm Capacity in regular steel: 6 mm (400 N/mm²) Length of back gauge: 750 mm Control: SP-9 motorized back gauge with digital display Blade gap: manual Condition of blades: good Fedszxgupepfx Ap Degh Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of clamps: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side gauge 1500 mm including ball bearings Equipped with a sheet support device: No Working height: 770 mm Motor power: 7.5 kW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum - Working length: just over 2 meters - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. Fgedjy R Efaopfx Ap Djh The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Fgsdju Rimmjpfx Ap Doh Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min Fjdpfx Ajzruf Nsp Degh - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: used, functionality: fully functional, control type: manual, degree of automation: manual, actuation type: manual, sheet thickness (max.): 1 mm, Manual guillotine shear JÖRG 4111 with a robust, heavy-duty workshop construction. Designed for precise manual cutting of sheet metal. This machine is suitable for metalworking workshops, maintenance departments, small-series production, and vocational training facilities. Technical specifications: • Manufacturer: JÖRG • Model: 4111 • Machine type: manual mechanical guillotine shear • Maximum cutting length: 1,020 mm • Maximum cutting capacity in mild steel: 1.0 mm • Maximum cutting capacity in aluminum: approximately 2.0 mm Fgedpfez Dqywsx Ap Djh • Manual operation – no electrical connection required • Robust, stable workshop construction • Compact design • New cutting blades installed The machine is used and shows normal signs of previous industrial use. Overall visual condition is good. A simple, reliable, and economical machine for straight cutting of sheet steel, aluminum, and other thin sheet materials. Internal reference: 48979-113 The machine is located in Latvia and is available immediately. Loading assistance is available. Transport within the Baltic States and to other European countries can be arranged upon request. The machine is sold as shown in the photographs. Inspection is possible by prior appointment.

Condition: excellent (used), functionality: fully functional, SHEAR SCM 2050 X 4 USED MACHINE INTERNAL CODE: SVR 365 Fedoxzgykspfx Ap Dogh

Condition: excellent (used), functionality: fully functional, Year of construction: 1972, HELMUT LOTZE Fgjdpfoyllrhox Ap Deh TYPE: KSHY30 Year of manufacture: 1972 Max. power: 5

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Fgodszz Ru Eopfx Ap Dsh Capacity 1100 x 4 mm

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Fjdpfszkgf Esx Ap Degh

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Machine is in good conditions. Fsdpsv H Hfnefx Ap Djgh

Condition: good (used), functionality: fully functional, Year of construction: 2000, control type: NC control, controller manufacturer: Robosoft, controller model: SC7, working width: 4,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 3 mm, back gauge: 750 mm, overall weight: 9,500 kg, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, type plate available, For sale: Fgedpfjz Hv Skjx Ap Doh 1 used hydraulic plate shear Manufacturer: Haco Type: HSLX 4006 Year of manufacture: 2000 Control system: SC7 Robosoft Technical data: Maximum cutting length: approx. 4,050 mm Maximum sheet thickness (steel 42/45): approx. 6.5 mm Maximum sheet thickness (stainless steel): approx. 3.0 mm Cutting angle: Adjustable from 0.5° to 3° Stroke rate: approx. 6 to 11 strokes/min Back gauge: approx. 750 mm, electric NC back gauge Includes: Cutting guard, documentation, light curtains, safety barriers, and some new spare parts (springs and seals for the lower clamping beam). Last inspection: 06/2026 The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 1986, functionality: fully functional, Hydraulic CNC plate shear Fischer DHS 10 / 3000 Maximum cutting length / sheet width: 3,000 mm Fjdpfjzl Twqox Ap Dogh Maximum sheet thickness, normal steel: 10 mm Maximum sheet thickness, stainless steel / V2A: approx. 6 mm Control: CNC-controlled back gauge Machine weight: approx. 7.5 to 9.0 tons Installation dimensions L x W x H: approx. 3.80 m x 2.20 m x 2.00 m

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Fsdpozdzkcefx Ap Djgh If you have any questions or require further information, please send a message or contact us by phone.